设计分类法的方法是：查看内容并与领域专家进行会谈，从而创建一个适当的数据模型。
Taxonomies are designed by looking at content and talking to subject matter experts so that an appropriate model of the data can be created.
其中较为简单的是所谓的“标准法”。 这种方法主要是为规模较小、风险模型和风险管理系统较简单的银行所设计的。
The simpler method, the so-called “standardized approach”, is designed for smaller banks with less sophisticated risk-modelling and risk-management systems.
用能量法求冲击应力和冲击变形。并将应力强度干涉模型运用于冲击问题，讨论了冲击的可靠性设计。
Impact stress and impact strain are solved by energy method. Stress - strength interference model can be used to impact investigation. Reliability design of impact has been studied.
采用状态空间平均法建立了变换器平均模型，获得了关键电路参数的设计准则和变换器的外特性曲线。
By using the state-space averaging approach, the converter's averaging model is presented, and the design criterion of key circuit parameters and the output characteristic curve are given.
这里首先分析了CRC校验软件的模型，在CRC - 16多项式下、采用查表法完成了其软件设计。
After analyzing software model of CRC firstly, software design is accomplished through looking up table in CRC-16.
采用图形变形法对简化优化模型在不同试验设计点进行可视化分析；
Then Graph Morphing is adopted to visualize the local region around the experiment design point of simplified model.
在建立异步电动机和变频器数学模型的基础上，按照工程设计法设计出PI调节器，并进行了双闭环控制实验。
On the base of ma thematic model of induction motor and inverter, engineering designing method is used to design the PI regulator, and experiments on the double-closed-loops system is carried out.
从无人机的数学模型出发，在特征点作小扰动线性化处理，采用特征值配置法对线性化对象设计线性控制器。
UAV mathematics model is linearized by little disturbance method in equilibrium operating points, then linear controllers are design by applying eigenvalue configuration method to the linear models.
介绍了产品设计评价的方法，并详细描述了模糊评价法的数学模型和评价步骤。
Product design evaluation methods were introduced, and the mathematical model and evaluation steps of fuzzy evaluation were described detailedly.
结合弹簧模型、变密度法和拓扑优化工具，研究了实现平面可控轨迹输出柔顺机构的设计方法。
This paper described the use of spring model, penalized density method and topology optimization as a synthesis tool for the design of controllable path-generating compliant mechanisms.
实际应用表明该模型可取代传统的经验类比法，直接为采矿爆破提供定量的设计依据。
It is showed in practice that the model can directly give quantitative design basis forb lasting.
国际上比较常用的方法是应用拉-压杆模型法进行结构构件的配筋设计。
The application of strut-and-tie model to the design of structural element distributed steel was made as that internationally.
在正交法设计的高温拉伸实验结果的基础上，本文建立了TC6钛合金本构关系的非线性模型。
Based on the experimental results of isothermal strain rate tension test, a non-linearity model of constitutive relationships for TC6 titanium alloy was established.
采用蒙特卡罗法设计车辆转弯行为仿真模型，并提出了局域路网交通量与OD矩阵估计的集成仿真方法。
Monte Carlo Stochastic Modeling Method is adopted to design vehicle turning behavior module, and a simulation model integrating link traffic flow and od matrix estimation is established.
通过采用边界元法对高线轧机压下垫块改造模型进行力学分析，开发设计一种适合测量高线轧机油膜轴承动态载荷特性的简易装置。
The screwdown block is improved by mechanics analysis with boundary element method, and a simple device is designed for dynamic load of oil film bearing used in high-speed wire rolling mill.
结合线性分解法和模型协调法提出了一个适用于一般工程系统设计的优化方法。
An optimization method based on the linear decomposition and the model coordination for the design of engineering systems is described.
通过人工弹簧模型和虚拟载荷法描述柔性机构设计的目标函数，采用伴随敏度分析法进行了敏度分析。
The objective function was described by artificial spring model and dummy load method and the sensitivity was analyzed by the adjoint sensitivity analysis method.
将基于二次规划的准解析法优化理论应用于机身主要承力框的设计中，建立了机身主要承力框的优化模型。
The method of optimization theory based on dual method was transplanted to design fuselage main frame, and the optimizing model of fuselage main frame was established.
首先根据机器人设计方案及失效分析建立故障树模型，用故障树分析法对此模型进行定性和定量分析。
Failure tree mode was set up based on robot design scheme and failure analysis. The property and quality of failure tree model was analyzed with fault tree analysis method.
该文对以活动网络图为基础建立的工作流模型，提出了一种基于ABC法的工作流仿真模型的设计与实现。
This article introduces the design and implementation of workflow simulation model based on ABC approach for workflow model based activity network graph.
首先介绍了现浇空心板截面“横肋附加刚度法”理论计算模型，进而实现在进行结构设计计算时，采用该模型，充分发挥现浇空心板截面刚度大的优良结构性能。
The paper introduced the theoretical model of "method of reinforced stiffness through cross rib" firstly, which the excellent structural capability of reinforced concrete cast-in.
金属飞机结构到复合材料结构的颤振模型设计，要求采用刚度等代法来完成，然而一般的设计方法通常需要消耗大量时间。
Design of flutter model from aircraft metal structure to composite structure can be achieved by equation of stiffness, yet it may cost much time for general design method.
本文针对STL格式的模型数据设计了一种简单的网格划分算法，并且用点射线法判断网格节点是否在模型内部。
We design an easy meshing algorithm with STL data and using point radial method to decide whether the point is in the model.
提出一种基于复合形法的液压挖掘机铲斗机构的优化设计方法，给出优化模型。
A method of optimal design for Hydraulic Excavator shovel mechanism is discussed and the optimal model is given.
作者提出了一种顺向双叶机械瓣的设计模型，并用有限体积法对这种模型进行流场和剪应力分布的数值模拟。
The author based on the above results designed a model of downstream direction bileaflet mechanical valve and used finite bulk method to calculate the velocity and shear stress profiles of this valve.
设计了一套完整的基于瞬态模型法和声波泄漏检测法的高压输气管线泄漏试验装置。
Based on transient model method and acoustic leak detection method, a complete set of high-pressure gas pipeline leak experimental device is designed.
本文采用年值法建立了包含输气干线优化设计和压缩机站优化运行的综合优化模型，这两个模型分别属于混合离散优化和组合优化。
In this paper, the method of annually costs is used to found the collective optimization model including gas transportation pipeline optimum design and compressor station optimum operation.
文中采用数值迭代法和建立等效电流模型，对P_B层结构参数和门极-阴极几何图形尺寸进行了合理设计。
Reasonable designs of the structure parameters of PB layer and the gate-cathode geometry are obtained by numerical iteration and an equivalent current model.
随之，建立串联弹簧模型理论用于初步确定隔震垫参数，再使用非线性动力时程分析法进行详细设计。
Then the model of series spring is used to estimate the isolator parameters and the method of nonlinear dynamic history analysis is used for detail design.
随之，建立串联弹簧模型理论用于初步确定隔震垫参数，再使用非线性动力时程分析法进行详细设计。
Then the model of series spring is used to estimate the isolator parameters and the method of nonlinear dynamic history analysis is used for detail design.
应用推荐