系统实现主要是各模块的具体实现。
The system realizes primarily is each mold piece realizes in a specific way.
本文给出了申报书信息管理模块的具体实现过程。
This article provides the concrete develop process of declaring information management module.
在详细设计部分，分别对各个功能模块的具体实现进行了阐述。
In the part of thorough design, this article has separately described the specific realization of each function module.
然后对其功能进行了详细描述，并着重阐述了几个模块的具体实现。
Then gives a detailed description of model's function and describes the realization of several modules.
文中详细阐述了系统的开发背景，研究意义，理论依据和各模块的具体实现。
The article elaborated in detail the development background of the system, the research significance, the theory basis and the concrete realization of various modules.
第五章是系统实现，介绍了系统各个模块的具体实现过程以及部分功能展示。
The fifth chapter intends to implement the case system. In this chapter, implementation procedures of each module are elaborated and the functions of each module are demonstrated elaborately.
此外，本文也给出了监护中心心电数据库管理系统的设计方法和各功能模块的具体实现原理。
Meanwhile, the paper introduced the design method and realization process of every function module of ECG database management system in monitoring center.
论文通过类的模型图、重要类的实现，业务的时序图详细介绍了这两个部分中各模块的具体实现。
This thesis describes detail implementations of every module by model of classes, realization of important classes and timing-charts of functions.
论文的第五章介绍了指纹图像采集设备及指纹识别开发包，描述了指纹识别功能模块的具体实现。
In chapter two of this dissertation, the fingerprint recognition technique is introduced, the development of fingerprint recognition, current situation, and the future is described;
重点阐述了目标机端程序设计实现过程中，对参数实时修改和模型信号监视等功能模块的具体实现。
In the course of the realization of the target program, we realized the function modules with Real-Time parameters modifying and signals monitoring.
在分析鞋楦数控加工方式的基础上，完成了系统总体方案设计，并给出了各个子模块的具体实现方法。
After analyzing the principle of last nc machining, general design of the whole machine was presented and the detailed realization method of each module was introduced.
首先介绍了整个系统结构框架，然后详细分析了各个模块的具体实现，最后在真实设备上进行了测试。
Firstly, the system architecture was introduced, then the realization of each module was analyzed, finally, testing on actual devices was carried out.
介绍了中继器固件的模块化设计方法，以及CAN模块初始化、双fifo转发等软件模块的具体实现。
The firmware of repeater is designed in modular design method. The key technology of CAN module initialization and dual FIFO transforming are discussed in detail.
第五章详细介绍了系统主要功能模块的具体实现过程，对系统的测试环境、测试方法和测试结果进行了介绍。
The fifth chapter of the thesis introduces the implement process of the system, the testing environment, the testing process and results of the test.
文中对航路设定、相关算法、航迹融合以及传感器管理进行了深入探讨，随后介绍了各个算法模块的具体实现。
The paper introduces the algorithm for constructing track, track correlating, data fusion and management of sensor, and then, focuses on the realization of the algorithmic modules.
本文从系统的总体规划、模块划分，到软硬件各模块的设计，再到各模块的具体实现都进行了较为详细的描述。
In this paper, we detailed introduce the solution from its collectivity design, division of modules of software and hardware, to the design and coding of software modules.
文中简要介绍了系统的硬件结构，并详细介绍了其软件部分的设计与开发，包括软件整体结构及各模块的具体实现。
Hardware structure of the system and developing of the software including whole structure and sub-modules are presented as well. The manual for the system is also attached.
主要介绍了逻辑生成模块、配置文件下载模块及FPGA映像装载设备驱动模块的具体实现，并对系统的运行结果给出了测试。
The concrete realization of the logic module , configurable file downloading module and device drivers module which load FPGA reflection are mainly introduced. The result of the system is also tested.
分析了实现该系统的关键技术，给出了各个模块的功能设计和实现，包括数据库设计，各功能模块流程图和各模块的具体实现。
It analyzed the key technology that achieved this system, and gave functional design and realization for each block including database design, flow chart and specific realization of each block.
第五章和第六章分别阐述了数据输入模块和数据输出模块的具体实现，包括模块划分、子模块的内部结构以及主要信号之间的时序关系。
Chapter 5 and 6 are the realization of data input module and data output module, which includes module partition, inner structure of submodules and the timing relationship of main signals.
先简要介绍了一下互连系统的设计背景，接着给出了作为互连系统核心的协议网关的硬件设计方法和互连系统的几大模块的具体实现过程。
Then the hardware design method of the protocol gateway, the key point to the system, and the implements of main functions of the system are given.
通过在技术框架上的应用程序框架分层，为应用程序的创建提供了必要的构建模块的技术框架更加具体到实现。
The technical framework, which provides the essential building blocks for creating an application, is made more implementation-specific by layering an application framework on top of it.
自定义登录模块获得新的标识(这取决于具体的需求和实现)。
The custom login module picks up the new identity (this depends on the requirements and the implementation).
用户只要给出接口和功能描述，应用逻辑将在模块库中自动选择适合功能的模块并通过具体机制实现其功能。
As long as users give the interface and function description application logic will automatically choose adaptive modules in the module database to complete their function by concrete mechanism.
进一步以《机械制图》课程为例介绍了网络资源库的具体实现，其中包括积件库、虚拟库、系统运行与维护等模块。
And then it introduces the realization of the network resource database, which includes integrable ware database module, virtual database module, system running module and maintenance module.
对S3C 4510b的HDLC模块的基本结构和工作原理进行了阐述，对S3C 4510b的HDLC控制器驱动程序的基本设计思想及具体实现进行了研究。
The basic structure and working principle of the S3C4510B HDLC module is introduced. The basic design thinking and concrete implementation of the S3C4510B HDLC controller driver is presented.
包括系统整体设计，逻辑框架与数据流程，各个功能模块划分，系统功能模块的设计与具体实现等部分。
Including overall system design, data flow and logical framework, divided into various functional modules, system design and function modules, such as specific part of the achievement.
接着，文章介绍了系统开发运行的环境、开发技术、功能模块设计及系统的具体实现等。
Then, the article describes the operating system development environment, technology, functional modules design and concrete realization of the system.
接着，文章介绍了系统开发运行的环境、开发技术、功能模块设计及系统的具体实现等。
Then, the article describes the operating system development environment, technology, functional modules design and concrete realization of the system.
应用推荐