软件逻辑上是四层框架结构，采用了模块化的设计思想；
The software is a four-layered frame structure in logic, and adopts the designing thought of modularization.
由于本设计采用了模块化的设计方法，提高了测量频率的范围。
Because originally design the design method to adopt module, improve the range of measuring frequency.
同时，为了增加系统的稳定性和可维护性，采用了模块化的设计思想。
At the same time, in order to increase the system stability and maintainability, we introduce the thought of modularization.
系统采用了模块化的设计，整个系统分为基本模块和功能模块两大部分。
The system has adopted the module design, the whole system is divided into two major parts: basic module and function module.
引入现代简约，模块化的设计概念，外观典雅大方，侧面造型简洁，大气。
The introduction of modern and simple, the concept of modular design, elegant appearance generous, simple side molding, the atmosphere.
这些模块化的设计和截面使整栋建筑从每一层看都像是一个拱顶迷宫一样。
The modularity of the plans and sections creates a labyrinth like maze of vaulted ceilings visible at all levels.
主控程序采用模块化的设计思想，程序经过调试，达到了预期的控制效果。
The thesis designs the program using modular designing idea. After debugging the program, finally, this thesis achieves the expected control effect.
本文采用模块化的设计方法对系统进行设计，缩短了开发周期，减小了开发难度。
The method of modularization is used to design the system. It shortens the period and reduces the difficulty of development.
在开发过程中根据软件工程原则，采用模块化的设计思想和自顶向下的开发策略。
According to the software engineering principle, this system adopted modular design ideals and top-down development tactics.
在软件上，系统采用了模块化的设计方法，提高了系统的通用性和维护的简易程度。
In terms of software, the system USES a modular design method to improve the system's universal property and reduces the difficulty of system maintenance.
软件设计方案采用模块化的设计思想，给出了主程序的流程图及数据处理的相关说明。
On the software design, modularized program has been used, the procedure flow chart is introduced, and explanation on digital processing is given.
在文中笔者运用模块化的设计思想完成了前端和检测台的硬件电路和软件程序的设计。
The dissertation introduces design of each module's hardware circuit and software program adopted modularization thinking in Front-end and Detection Base.
依据模块化的设计思想完成了蛇形机器人的结构设计，并建立了相应零件的三维模型。
According to the modular design of the snake-like robot to complete the structural design, and the corresponding parts of the three-dimensional model.
该系统采用模块化的设计，关键算法和功能均封装在模块中。使系统具有良好的扩展性。
This system USES modular design, and encapsulates the key algorithms and functions in the module, makes the system has good scalability.
整个下位控制系统软件开发采用了开放式、模块化的设计方法，方便用户使用及功能扩展。
The whole lower software system ADAPTS the method of open and modularization architecture, it's convenient for users and function expand.
介绍了一个8控制回路的组合开关，从外形结构和功能结构上，给出了其模块化的设计过程。
A combined switches with 8 control circuits is presented and its modularized design process is offered from figure configuration and function structure.
小屋拥有难忘的拱形太阳能屋顶，模块化的设计，模块化的构造和专为家庭聚会设计的房屋布局。
An impressive arched solar roof is paired with modular design and construction and a house layout designed for large family gatherings.
该系统结构采用模块化的设计，具有良好的灵活性和通用性，能够实现系统动态的任务重规划。
Adopting modularity design, the proposed system architecture has good flexibility and universality and can realize the dynamic re-planning function.
利用面向对象的VB6.0编程技术和模块化的设计思路编制了东北玉米区域动力模型软件系统。
The model software system was developed by object orientated VB6.0 programming technology and based on module designed thought.
在该系统的设计过程中，通过应用面向对象和模块化的设计方法，使系统易于重用、维护和扩展。
Our system is proved to be easier to reuse and maintain, as we use object-oriented methods to design the system.
主要介绍了利用模块化的设计技术实现以arm7为核心的UHF频段RFID读写器的系统设计。
And the modulation design of the UHF RFID interrogator based on ARM7 is mostly introduced.
仿实平台的零体设计，采取了模块化的设计计划和功能开解的和略，形败否更旧、否扩铺的体解构造。
Simulation platform design used the modular scheme and function dispersing strategy, formed a system can update and expand.
接着，分别对旋转体扫描显示系统的显示单元和图像引擎进行了详细的研究，提出了模块化的设计方法。
Then, the display unit and graphics engine of rotational motion swept-volume technique are particularly studied, and the modular method is presented.
系统硬件设计方面，根据模块化的设计思路，将整个硬件系统分为两块，分别是核心处理模块和数据采集模块。
According to the modular idea, the whole hardware system is divided into two pieces of hardware, which is the core processing module and data collecting modules.
在简述了汽车模块化技术的基础上，以模块化产品设计的原理，就公交车车门开关存在的缺陷进行模块化的设计。
This article introduces the auto modular technology, then makes modular design according to the principle of modular product design and the characteristics of bus door switch.
基于可重构机床模块化的设计方法，设计了一套可进行微细电火花加工和微细电解加工的多功能微细电加工系统。
According to the method of modular design of reconfigurable machine tool, a multifunctional system for micro electro-discharge machining (EDM) and electrochemical micromachining (EMM) was designed.
重点解决了系统的体系结构，通用性和模块化的设计和实现，检查报告文档自动生成及系统安全性设计等关键问题。
It solves especially the key problems such as systematic system structure, generalization and modularity of system, generating checkup report document automatically and system security design.
重点解决了系统的体系结构，通用性和模块化的设计和实现，检查报告文档自动生成及系统安全性设计等关键问题。
It solves especially the key problems such as systematic system structure, generalization and modularity of system, generating checkup report document automatically and system security design.
应用推荐