说明了模具结构的特点。
介绍了其模具结构、设计参数及技术经济分析。
Die structure and design para meters, techno-economic analysis were introduced.
重点介绍了模具结构和工作过程及重要零件的设计。
Further, die structure and working process, as well as critical parts design are mainly introduced.
介绍了楔横轧工艺的类型、应用、工艺参数及模具结构。
The type, application, technological parameters and die structure of the cross-wedge-rolling technology were introduced.
这种精冲方法，模具结构简单，易于制造和安装，成本低。
Such fine blanking process simplifies die structure, easy to make and to install, and also has low cost.
介绍了一副典型的普通触指冲落模的设计分析和模具结构。
The design analysis and die structure of typical common punching die of button contact are introduced.
针对物镜筒注塑件，设计了一种内收式二瓣牙内螺纹模具结构。
Designed a injection mold with two teeth threaded core-pulling mechanism for the objective slide.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
根据零件的需求量及结构特点，对其工艺、模具结构进行了分析。
According to the parts demand in quantity and structure characters, its process and die structure are analyzed.
具备模具结构、运作、主要尺寸、特别要求等，定案会议用图纸。
Drawing used to make final decision with basic mould messages such as structure, operation, main dimension, special requirements and so on.
就模具结构对玉米秸秆粉粒体材料压制杯形工件的影响进行了研究。
This experiment studied the influence of mold design on molding a cuppy product from maize stalk powder.
根据产品零件的结构特点和生产量，对其工艺、模具结构进行了分析。
According to the structural characters and production quantity, the process and die structure of parts are analyzed.
经生产验证，该模具结构合理、生产效率高，有很好的技术经济效益。
The die practically proves to be feasible in structure, high in efficiency of production and technological economic benefits.
通过改进工装模具结构，在普通油压机上实现了丝材的无压余连续挤压。
The improved design of process tooling structure realized continuous extrusion in common oil press machine.
对壳体的冲压工艺进行了分析，介绍了拉伸、切边模具结构设计的要点。
Analyzed the pressing process of the shell part, introduced the structure design points of drawing-trimming die.
分析了三峡绝缘盒的结构及设计制造难点，并给出了模具结构的解决方案。
The structure as well as the design and manufacture difficulties of Sanxia insulation box are analyzed, and the solving steps to mold structure are provided.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.
介绍了一种新型的冰箱发泡模具结构，并分析了其结构特点及其工作过程。
A new structure of refrigerator foam mold is introduced, and both the structural characters and its work process are analyzed separately.
分析了叉车平衡重后盖的成形工艺，介绍了模具结构及主要工作部分的设计。
The forming technology of balance weight cover of fork truck is analyzed. Die structure and working part design is also introduced.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
介绍了大型电机定子扇形片模具结构的设计，及零部件设计加工难点和解决办法。
Die structural design of large-scale motor stator sector piece, difficulties and solving steps in design and manufacture of parts and components are introduced respectively.
优化了模具结构，同时也介绍了在冲压过程中凸、凹模易开裂采取的措施和方法。
Also introduced the measure of prevent the convex and concave die cracking in course of pressing.
介绍了壳型铸造凸轮轴的模具结构特点、主要参数的确定、模具的设计制造方法。
Abstrct: It has been introduced that structural character, main parameters and design and manufacture of shell molding camshaft die.
简化了模具结构，使模具的成本降低，生产中产品质量稳定可靠，模具经济实用。
Simplified mold structure, reduce the cost of the mold, the production of stable and reliable quality, economy practical.
本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性，定位方式及受力分析。
This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.
叙述了外壳注射模在试模中出现的问题，分析了问题产生的原因并改进了模具结构。
The questions of testing outer covering injection mold are stated, analysis on the reason and the mold structure is improved.
叙述了外壳注射模在试模中出现的问题，分析了问题产生的原因并改进了模具结构。
The questions of testing outer covering injection mold are stated, analysis on the reason and the mold structure is improved.
应用推荐