深槽模格的设计可用来处理倒入任何类型面糊。
Its deep-grooved waffle grid design is built to handle any type of batter you pour in.
介绍了拉深模、冲底孔、冲槽模及冲侧孔模的三种模具结构。
Three kinds of mould structures were also introduced including drawing mould, punching bottom hole and punching groove mould, and punching side hole mould.
针对此工艺设计了翻边成形双槽模，并介绍了模具的结构特点及工作过程。
A double_slot flanging forming die was designed according to this processing technology. And the characteristics of the structure of the die and its working process were introduced.
作者着重的对设计中采用的槽模圈梁在施工中的复杂性提出了简便易行的施工工艺，是一项较好的新技术，本文由浅入深的论述了一些实际应用的效果。
Author brings forward a constructing technics, it is simple and convenient and easy to be performed. It is a new technology. This paper discusses effect that it is applied in practical engineering.
成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。
Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.
通过对蓄电池槽结构的工艺分析，确定了该类制件的注射模结构、工作过程，并对其设计特点进行了介绍。
Though the technological analysis of the structure of the accumulator tank , the structure and working process of the injection mould for the type of parts are determined.
介绍了通风槽管的成形工艺，设计了浮动悬臂式弯曲成形模结构，介绍了其模具工作过程，分析了模具设计要。
The structure of the floating cantilevered bending forming die was designed, the working process of the die was introduced and the main designing points were analyzed.
通过水模试验研究了涡流控流槽对连铸中间包流体流动的影响。
The influence of eddying flow control trough on flowing liquid in tundish is researched through water simulating test.
阐述了槽型凹模拼块在加工时的工艺流程、工艺要求，以及槽型凹模拼块组装程序。
The technology process, technology requirement and the assembling procedure of shaped groove die were also set forth.
对提取搅拌槽通过冷、热模放大实验得出，按临界悬浮转速放大，放大效应很小，是比较理想的放大方法，而且在一定转速范围内茶多酚提取属内扩散控制过程。
The results of magnification experiments show that critical suspension speed is an ideal scale-up method and the extraction process is controlled by interior diffusion within a certain agitating rate.
在分析环槽形内侧凹塑件结构特点及模具设计方案的基础上，设计了此类塑件的注射模。
Based on the analysis of the structure characteristics of the plastic product with inner concave loop slot and the mold design projects, an injection mold for this kind of part was designed.
据发明，至少有孔(10)的一些安排至少在一个槽在全断面模具模面组成(11)。
According to the invention, at least some of the holes (10) are arranged in at least one groove (11) formed in the mold face of the full-face mold.
一种用于将熔融金属从容器传送入浇包、锭模、流槽、供料压铸机或其它结构中的一个或多个的系统。
A system for transferring molten metal from a vessel and into one or more of a ladle, ingot mold, launder, feed die cast machine or other structure is disclosed.
发现，采用消失模铸造耐磨槽铸件，尺寸精度高，表面质量好，组织致密，使用寿命可提高50%以上。
It was found that the wear-resistant trough cast with EPC process was of high dimension accuracy, good surface quality, dense structure, and its working life could be increased by more than50%.
虽经改进，在胎具上开空槽、增设导向模等，仍不能有效克服纬线张力造成的迟滞效应。
The effect of slow moving resulted by tension force can also not effectively overcome, though the utility model is improved, comprising opening a dead slot on the mould and adding a direct die.
介绍了精密注射成型的特点，阐述了精密注射模排气系统的各种设计方法 ，特别是分型面上排气槽的开设原则和设计工艺参数。
New injection molding technologies including precision injection molding technology are developing with the requirements of high quality of injection molding parts.
介绍了精密注射成型的特点，阐述了精密注射模排气系统的各种设计方法 ，特别是分型面上排气槽的开设原则和设计工艺参数。
New injection molding technologies including precision injection molding technology are developing with the requirements of high quality of injection molding parts.
应用推荐