传感元件为两套楔角相同的左旋和右旋石英光楔。
The sensor consists of two sets of quartz wedges which are respectively right-handed and left-handed with equal angle.
本文提出了一种检验平板玻璃微小楔角的新实验方法。
A new experimental method for checking micro wedge angles of glass plates is presented.
圆圈，纷歧定需求以接触拟合直线也必然是此中心的楔角等分线。
The circle does not necessarily need to touch the fitting lines nor is its centre necessarily on the wedge Angle bisector.
本文介绍了一种简便的测量微波延迟线所用晶棒两端面间楔角大小的方法。
This Paper Presented a simple method for measuring wedge Angle between end-faces of crystal bar used in microwave delay lipe.
分析了准直原理，讨论了平行平面板楔角和横向位错宽度对准直判断的影响。
The principle of collimation is analyzed. The influence of the small wedge Angle of the plane parallel plate and the lateral shearing width upon judging laser collimation are discussed.
分析了准直原理，讨论了平行平面板楔角和横向位错宽度对准直判断的影响。
The influence of the small wedge Angle of the plane parallel plate and the lateral shearing width upon judging laser collimation are discussed.
通过有限单元法计算和优化设计，确定锯片齿形前角、后角、楔角及槽底圆弧半径合理值的原则及其参考值。
Principles of reasonable values and reference data of saw tooth's rake, relief, wedge angles and radius of bottom arc can be determined through finite element method of calculation and optimum design.
该装置的特点：采用多个微动机构，在微机控制的细分驱动方式下，利用搜索逼近的方法完成对楔角的测量。
Using micro displacement mechanisms and divided drive manner under the control of a computer by means of search skills, the test work is done with great facility.
分析结果表明，带楔角的取样反射镜与后续光路中使用楔形真空窗口构成了一对棱镜，产生负的群速度色散。
The result shows that the edged sampling mirror and the edged vacuum window can be treated as a pair of prisms, which generates negative group velocity dispersion.
这楔角的等分线给作为路口停止切割边缘轮廓点品脱的啤酒。 （3）画一个圆订交点，两品脱和相切直线拟合直线。
The wedge angle bisector gives as intersection with the cutting edge profile point pint. (3) Draw a circle that intersects point pint and is tangent to both straight fitting lines.
它利用激光散斑技术，记录了由于微小楔角引起的散斑位移量的散斑图，由此导出被测试件的微小楔角。这种方法具有光路简单、非接触、精度高等特点。
The method uses laser speckle technique to record the shift amount of speckle patterns due to micro wedge angles, and thus micro wedge cangles of the test piece are induced.
斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目。
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the re.
闸板有两个密封面，最常用的楔式闸板阀的两个密封面形成楔形，楔形角随阀门参数而异。
Gate has two sealing surfaces, the most commonly used wedge gate valve sealing surface to form two wedge-shaped, wedge Angle parameters vary with the valve.
三角构造楔内部的突发构造是形成背斜南翼陡、北翼缓的根本原因。
The pop-up structure causes the south limb of anticline is steeper than the north limb of anticline.
研究了在胶瘤中嵌入三角形金属楔块对单搭接接头强度和应力分布的影响，结果表明，金属楔块能显著提高接头的强度。
The influence of embedded trilateral cross-section metal bar in the fillet on the strength and stress distribution of single lap joints was discussed.
保险杠右前角已经从脚蹬子那儿，两轮中间楔进自行车。
The front right corner of the bumper wedged into the bike somewhere in the pedal area, between the wheels.
斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
第二排构造带继承第一排由侏罗系煤层传递而来的位移量，在中段由于受阻而发育构造三角楔，形成背斜。
The monocline observed in the field is the forelimb of fault-bend foldings. The second anticline belt inherits the first belt's displacement forming structure wedges.
当折射棱镜折射角很小时，称之为光楔。
It is called the optical wedge, when the refraction Angle of the refracting prisms is tiny.
从构造形态上看，昌吉背斜东西两段存在明显差异，三角构造楔前锋楔入不同的构造软弱层，是这种差异形成的根本原因。
There is difference at structure character between the east of anticline and the west of anticline, the reason is triangle zone wedged into different incompetent layer in east and west.
利用一种新的橡胶材料应变能函数，对橡胶楔体与刚性缺口接触大变形问题进行了分析。得到了楔体尖端场的渐近方程，对渐近方程进行了数值分析，得到了尖角附近应力及变形分布。
A new strain energy function was used to analyze a rubber wedge contact with a rigid notch. We found the asymptotic equations near wedge tip, and solved the equations with numeric method.
此系统由一块直棱镜(三角形楔)组成，入射光产生折射并发散，这样使得入射光的扩散更加广泛。
The system consists of a panel of linear prisms (triangular wedges) which refract and spread the incoming light to produce a more diffuse distribution.
昌吉背斜是因为三角构造楔的楔入而生成的褶皱背斜。
The following conclusions are gained:1. The main reason of ChangJi anticline form is the wedging of triangle zone.
昌吉背斜是因为三角构造楔的楔入而生成的褶皱背斜。
The following conclusions are gained:1. The main reason of ChangJi anticline form is the wedging of triangle zone.
应用推荐