可得到更高的渗透通量和机械强度。
Higher osmosis flux and mechanical intensity could be acquired.
研究了固体催化剂机械强度测试与表征技术。
Secondly, the mechanical-strength measurement and characterization of solid catalysts are investigated.
焙烧球料的机械强度也能满足渗滤浸出操作要求。
The mechanical strength of calcined briquet can meet the needs of percolation leaching operation.
我们用一个简单的模型得出每个物件被卡住所需要的的机械强度。
Using a simple model we relate each of them to the mechanical strength of the jammed state.
工程师需要了解各种材料的机械强度和耐腐蚀的能力。
Engineers need an understanding of the mechanical strength and corrosion resistance of various materials.
电池外壳应该有足够的机械强度，使铁锂电池免受机械撞击。
Batterypack should have sufficient strength and the Li-Fe cell inside should be protected from mechanical shocks.
单颗粒压缩强度是衡量人造金刚石机械强度的重要参数之一。
The mechanical strength of diamond crystal particle is usualy eveluated by measuring its compressive strength.
电池外壳应该有足够的机械强度，使铁锂电池免受机械撞击。
Battery pack should have sufficient styength and the Li-Fe cell inside should be protected from mechanical shocks.
这些机组具有生产率高、机械强度高及织物运行无褶皱的特点。
The ranges are characterized by high productivity, mechanical robustness and crease-free fabric runs.
l机械强度高、耐磨、适宜在线反冲洗，操作方便，运行成本低。
L High mechanical strength, anti-friction and suitable for on-line back flush, easy to operate and low cost.
这样可以极大地扩张其表面积，增加电荷负载，又不会降低材料的机械强度。
This massively increases their surface area and hence the charge they can hold, but without impairing the physical strength of the material.
这些脂肪族聚酯然而，更昂贵和缺乏机械强度比传统塑料如聚乙烯。
These aliphatic polyesters are, however, much more expensive and lack mechanical strength compared with conventional plastics such as polyethylene.
经拍片和机械强度检验，证明焊接接头无内部缺陷并符合技术要求。
The photograph and mechanical robustness tests show that the welding joints have no internal defects and accord with the technical requirements.
金属类耐热性能与机械强度相当理想，但价格与抗腐蚀性能是其劣势；
The heat resistance and mechanical strength of metal is quite good, but the price and corrosion resistance are its disadvantages.
胶件密度、机械强度、硬度、耐介质系数等性能指标均达到技术要求。
The density, machinery intensity, hardness and medium resistance index of the rubber products meted the technology requirement.
重点讨论了第三相对二硅化钼发热元件的耐热性能和机械强度的影响。
The effect of the third phase on the heat resisting and strength of molybdenum disilicide heating element was discussed.
采用高透过率的钢化玻璃，提高了光的穿透性，保证了组件的机械强度。
Tempered glass: High transmission rate tempered glass increases solar transmission and ensures excellent mechanical strength of solar modules.
缺点是机械强度较低，耐油、耐溶剂和耐酸碱性差，较难硫化，价格较贵。
The disadvantage is lower mechanical strength, oil, solvent and acid poor, difficult to cure more expensive.
铁锰复合球团矿与原铁矿球团相比，具有较高的机械强度和良好的冶金性能。
Iron-manganese ore composite pellets have higher mechanical strength and better metallurgical properties than those of conventional pellets.
同时具有机械强度高、密封性能好、进料速度快、耗能低、操作简便等特点。
At the same time with high mechanical strength, sealing performance, and feed speed, low energy consumption, easy to operate and so on.
结果表明，与聚偏氟乙烯膜相比，改性膜的热稳定性和机械强度均有所提高。
The results show that the thermal stability and machine intensity were improved compared to Polyvinylidene Fluoride membrane.
本文通过实验，探讨了制备条件对渣油加氢脱金属催化剂载体机械强度的影响。
Influence preparation of parameters on crushing strength of the support for residue oil hydrodemetalation catalysts was investigated through experiments.
除了提供机械强度或结构强度外，套管螺纹还必须与相关的压力和流体相适应。
In addition to providing mechanical or structural strength, the casing thread must be compatible with the pressures and fluids associated with the application.
它具有机械强度高、韧性好、耐热性好及高的热强度、低收缩性、固化性好等特点。
It has high mechanical strength, toughness, good heat resistance and high thermal intensity, low shrinkage, good curing characteristics.
为什么，属性的总和：，机械强度，化学惰性，易于制造，那不是独特的解决方法。
Why? Bundle of properties: mechanical strength, chemical inertness, ease of fabrication: that's not a unique solution.
对变压器引线的短路损坏形式进行了分析，并计算了引线在短路情况下的机械强度。
The damage forms of transformer leads in short-circuit are analysed, its mechanical strength in short-circuit condition is calculated.
结果表明，浸渍、干燥、煅烧和硫化均是影响催化剂机械强度及其可靠性的重要过程。
Results reveal that the impregnating, drying, calcination and sulfidation are all important processes for the mechanical strength and reliability of the catalyst.
对油品有极佳的抵抗力，耐高温、耐候性均佳，但机械强度、压缩变形率及耐水性稍差。
Excellent resistance to oil, high temperature resistance, weather resistance are good, but the mechanical strength, compression deformation rate and water resistance is slightly worse.
对油品有极佳的抵抗力，耐高温、耐候性均佳，但机械强度、压缩变形率及耐水性稍差。
Excellent resistance to oil, high temperature resistance, weather resistance are good, but the mechanical strength, compression deformation rate and water resistance is slightly worse.
应用推荐