叙述了旋压工艺的实质及特点。
The technological substance and the characteristics of spinning were related.
现在动用了我们最后的旋压的储备了。
旋压储备包括在运转中非满载的发电机。
The spinning reserve comprises generators running, but not at full capacity .
针对对轮旋压新工艺进行了刚塑性有限元分析。
The rigid plastic finite method is applied to deal with the new power spinning process of the counter roller spinning.
筒形件强力旋压是一种连续的局部复杂变形过程。
The tube power spinning forming is a continuous local large deformation process.
筒形件强力旋压是当代的一种重要生产工艺过程。
Power spinning of cylindrical parts is an important productive technological process in modern industry.
简介了热旋压的工作机理，加热方法和辊轮进给方法。
The working mechanism, heating method and roll feeding method of hot spinning are briefly introduced.
本文阐述核反应堆用锆-4合金导向管缩径段的旋压成型工艺。
The forming technique by spinning for the necking parts of zircalloy-4 guide tubes for nuclear reactors is described.
介绍大型旋压机控制系统的结构组成和旋压辊、成型辊轨迹曲线。
The track curve equations of spin roller and molding roller are given in this article too.
因此，通过多道次滚珠旋压可实现大减薄量薄壁筒形件的旋压成形。
Therefore, the spinning of thin-walled tube with large thickness reduction can be realized through multi-pass ball spinning.
筒形件强旋时，由于不均匀的塑性变形，在旋压件内产生残余应力。
Because of the nonuniform plastic deformation, residual stresses occur in spun parts.
本文通过实验研究和分析，对平板毛坯普通旋压的变形方式进行探索。
The deformation mode of conventional spinning of plates has been studied in this paper through experiments and analysis.
这对于优化TC 4管材旋压工艺和缺陷的科学预报有重要的指导意义。
It has an important guidance purpose for optimizing spinning technology of TC4 tube and scientific prediction of deficiency.
在试验研究的基础上，成功地将行星旋压工艺应用于车辆的阻尼器封口。
The planetary spinning is successfully used for vehicle damper sealing based on the basis of experimental research.
钛合金的变形抗力和屈强比较大，其壳体室温变薄旋压成形有一定困难。
Generally, it is difficult to spin titanium alloy at room temperature, because of its high deformation resistance and yield to tensile ratio.
神经网络的输入为主要的旋压工艺参数，输出为三旋轮径向力的均方差。
The main inputs of the ANN are the key process parameters and the output is the mean square deviation of the radial spinning forces.
分析影响旋压工艺变形力的主要因素，介绍了确定旋压工艺力的基本方法。
Through analysing the main factor that affects spinning technology deform force, this passage introduces the basic method of spinning technology force.
作为一种连续局部塑性成形工艺，滚珠旋压被应用于制造铝合金薄壁筒形件。
As a successively and locally plastic deformation process, ball spinning is applied for the purpose of manufacturing thin-walled tubular parts of aluminum alloy.
长春汽车旋压制品有限责任公司，是生产汽车发动机旋压皮带轮的专业厂家。
Changchun automobile spinning - products co . , ltd is a specialized enterprise producing pulleys by spinning technology.
同时给出了考虑偏离正弦律强力旋压等壁厚和变壁厚锥形件毛坯的设计模型。
The design models of blank of tapered wall thickness cone and equal wall thickness cone with deviation from sine law are presented.
本文重点阐述了钢质气瓶、铝合金气瓶的旋压成形工艺特点及其成形工艺规范。
Features and process criterion of spinning for steel and aluminum alloy gas bottle are mainly presented in this paper.
型劈开式皮带轮的旋压剖分成形过程涉及多体运动以及弹、塑性多变形模式的耦合。
The spinning process of splitting V type belt wheel involves movement of multi-body and couple of elastic-plastic deformation.
以生产数据为学习样本，建立BP神经网络模型，实现对剪切旋压工艺参数的预测。
BP neutral networks model has been established in order to predict process parameter of shear spinning based on many data accumulated during manufacturing.
分析结果对于旋压模具的优化设计和旋压工艺参数合理选择提供了可靠的理论基础。
The analyzing results can provide reliable theoretical basis for the spinning die's design and parameters' choice.
该机床具有旋压切断功能，特别适用于压缩机壳体等大型圆柱薄壁筒形件的切断加工。
It has the functions of spinning and cutting, especial ly available to cut off big thin-wall cylindrical workpiece such as the shell of compressor.
分析了后减震器帽的成形工艺，介绍了成形该零件的拉深模、翻边模以及旋压模具结构。
The forming technology of rear shock absorber cap is analyzed, and its drawing die, flanging die and spinning die structure are also introduced.
该系列旋压机床功能全、性能稳、效率高，可实现除装卸料以外的多道次旋压自动循环。
It is featured with complete function, stable performance, high efficiency. The automatic circulation of multipath spinning can be realized except loading and unloading.
介绍了滚珠旋压的基本原理，以塑性力学为基础，分析力学参数对旋压件成形性的影响。
The basic principle with respect to ball spinning is introduced, and based on plastic mechanics, the influence of mechanical parameters on formability of spun parts is analyzed.
介绍了滚珠旋压的基本原理，以塑性力学为基础，分析力学参数对旋压件成形性的影响。
The basic principle with respect to ball spinning is introduced, and based on plastic mechanics, the influence of mechanical parameters on formability of spun parts is analyzed.
应用推荐