推导出磁悬浮轴承系统的数学控制模型，开展了磁悬浮轴承控制系统的控制算法研究。
On the basis of mathematics mode deduced in the paper, the study of AMB control algorithm has been developed.
一开始，看到在实时的数学模型中有什么多参数可以调，有这么强大的控制声音的能力让人难以抗拒。
Initially, having so much power over sound could be overwhelming - looking at the number of parameters you can adjust in the real-time mathematical model.
可是银行和对冲基金不是已经雇用数学家为自己设计了精巧的风险控制模型了吗？
Don't Banks and hedge funds employ mathematical geniuses who develop highly sophisticated models to control these risks?
人们认为通过数学技巧可以精确控制风险，但那些风险模型在对流动性进行定量分析时一筹莫展，最后干脆一起蒸发殆尽了。
Mathematical brilliance was supposed to model risk with precision, but the models evaporated along with the liquidity that they had failed to quantify.
建立燃气轮机数学模型是船舶动力及其控制系统研制的重要手段，建模的关键在于提高精度和收敛速度。
The mathematic model of gas turbine engine is important for the development of ship power and its control system. The key of modeling is the precision and convergence.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
为了便于分析与设计，文中建立了控制系统的数学模型。
In order to facilitate the analysis and design, mathematical models of control system are established.
本文先对纺织、印染等行业中的多单元传动控制系统进行分析，建立系统的数学模型。
This paper first analyses the multicell drive controlling system in textile or printing and dyeing industry, then form the mathematical model of it.
掌握被控对象的数学模型和建模后控制系统的设计，是过程控制系统分析、设计、调试和获得较高控制品质的基础和关键。
The math model and control system design after modeling are the base and key point to process control system analyses, design, debug and obtain the higher control quality.
论文通过分析两相混合式步进电机的数学模型，介绍了两相混合式步进电机的细分控制策略。
The thesis presents the subdivision drive method by analyzing the mathematics models of two-phase hybrid stepping motor.
首先，通过对系统性能以及STATCOM数学模型的分析，对原有数学模型进行了数学推导引入了STATCOM接入点的电压偏差作为控制变量。
At first, through analysis of the system performance and the mathematics matrix of STATCOM, we introduced the voltage of the point where STATCOM jointed in the system as state variable.
本文围绕着间歇精馏塔对其动态数学模型及其控制方法进行了研究。
The dynamic model and its control method of batch distillation column are studied in this paper.
首先，建立了阀控非对称缸位置控制系统与力控制系统的数学模型。
At first, it studied the plant model of position and force system about valve control unsymmetrical hydraulic ram.
同时，考虑到路面扰动输入对悬架控制的重要影响，建立出积分白噪声形式的路面不平度数学模型及正弦激励模型。
Considering the influence of the input disturbance, a mathematical description of road surface irregularity is established, which is the model of integral white noise and inspire with sine wave.
为了控制及使用致动器，必须建立其准确的数学模型。
To control and use the actuators, it is necessary to establish an accurate model of the actuators.
针对当前城市交通系统中的被控对象具有较大的随机性和偶然性，引入了不需要建立精确数学模型的模糊控制。
This design USES fuzzy control theory which doesn't require exact mathematical model because of the randomness of the controlled objects in the current city traffic control system.
本文分析了电阻加热炉的数学模型，说明了常规控制器不能达到高控制精度的原因。
This paper analyzes the mathematical model of a resistance heating furnace, showing that a normal controller is unable to reach a high control accuracy.
文中列举了各种数学模型、控制系统程序流程图和方框图。
Mathematical models, systematic program flow charts and block diagrams of control systems are listed.
论文首先建立了变风量系统的多变量控制模型，奠定比较完整的数学分析基础。
The multivariable model of the VAV system is established, which is the fundamental of the mathematical analysis of systems.
详细介绍了用公路路线上控制点坐标进行公路直线和曲线平面位置定线的数学模型。
This paper introduces the mathematical model for highway route alignment. This model can determine plan position of highway straight and curve by the control points.
在同步旋转坐标系下，建立了直线感应电动机的矢量控制数学模型。
The vector control mathematical model of linear induction motor is established under the synchronization reference frame.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
这种方法不完全依赖于非线性对象的数学模型，因而为非线性系统的学习控制提供了一种有效的研究方法。
This novel learning control mechanism, which does not depend upon too much about the nonlinear system, gives an exciting alternative for studying nonlinear control system.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
在了解原型发动机数学模型和控制规律的基础上，对涡轴发动机加速过程的最优控制问题进行了研究。
Based on the engine mathematical model and engine control law, the optimal control for turbo shaft engine acceleration is investigated.
最小的控制界优化数学模型，最后给出主要研究过程、最优控制下限的数学表达式及其适用条件。
Major parts of the researching process, the formula for the optical control limits and the application condi.
最小的控制界优化数学模型，最后给出主要研究过程、最优控制下限的数学表达式及其适用条件。
Major parts of the researching process, the formula for the optical control limits and the application condi.
应用推荐