结果表明，本文建立的分区交界面数值计算模型是可靠的，可用于处理几何形状复杂的流场模拟。
The result shows that the numerical calculation model of interface of block-structured grids in reliable and can be used for complex geometry shape.
基于速率方程建立了线性光放大器(loa)的数值模型，模拟了线性光放大器的增益钳制特性。
The numerical model of the linear optical amplifier (LOA) is built based on the rate equations. The gain clamping characteristics of LOA are simulated.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
本文应用感应加热理论，建立了连铸坯料温度分布的预测模型，对感应加热过程进行了数值模拟。
Based on induction heating theory, prediction model of CC slab temperature distribution was built and numerical simulation for induction heating process was carried out.
通过建立典型模型，运用数值模拟预测法和最优分割法，制定了复杂韵律层重组的技术政策界限。
The limit of technical policies for complex rhythmite reconstruction is developed by establishing typical model and using numerical modeling predicting method and optimal segmentation.
根据泥石流运动数值模拟取得的泥石流流速和流深分布特征，建立了泥石流危险性动量分区模型。
A momentum model of debris flow risk zoning is set up according to the distribution of debris flow velocity and depth from the numerical simulation.
从数值结果得出，建立的随机模型对于模拟纤维桥连是比较有效的。
From the numerical results, the established stochastic model is comparatively effective for simulating the fiber-bridging effect.
文章根据平面应变假设，建立了合理的数值模拟研究模型。
This paper use the plane strain hypothesis to build a reasonable study model of numerical simulation.
针对压铸特点，建立了适合于数值模拟的压铸摸具温度场数学模型，确定了压铸过程的边界条件。
According to the characteristic of die casting, the mathematical model suitable for numerical simulation of die casting dies was set up and the corresponding boundary conditions were determined.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文建立一个数值模拟完全气体混合流动的理论模型。
A theory model is constructed to numerically simulate the mixing perfect gases flows.
在做数值模拟之前，需要先建立气管的几何模型。
In order to perform numerical simulation, geometric model of trachea is needed.
其次应用网格粗化技术，再结合生产动态建立油藏数值模拟模型；
Secondly, the reservoir numerical simulation model is developed by using gridding technology integrated with production performance.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
地质模型的建立在数值模拟中至关重要。
It is very important on the numerical simulation to establish the geological model.
较为详细地论述了水平井油-水两相渗流数学模型的建立，数值求解方法以及模拟计算机软件的研制和应用。
Establishment of a finite element mathematical model for the flow, its numerical solution, the associated computer program and the application are presented in detail.
应用BP -神经网络法对数学模型进行修正，建立有限元数值模拟方法补充剔除数据并对数学模型适用范围进行扩展。
The mathematical models are amended by BP neural network algorithm, and method of finite element numerical simulation is used to compensate the removal data and extend the applied range.
模型的建立和网格的粗细直接影响着水轮机数值模拟的结果和对硬件资源的需求。
The results of numerical simulation and the demand of hardware resources are directly affected by the model and grids.
本文建立的性能预测模型考虑了气相的可压缩性和沿流道的截面面积的变化，介绍了数值模拟的方法和步骤。
A performance prediction model is established in this paper which taking ac count into gas compressibility and the change of cross section area of flow channel.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
基于“油粒子”概念建立了模拟海上溢油行为的三维数值模型。
A three dimensional numerical model of oil spills was developed based on the particle approach.
目前对单轴蠕变的数值模拟时建立的模型为连续均质体，很难真实地模拟实际情况。
Currently, most reconstruction model for uniaxial creep of numerical simulation is continuous homogeneous, which is difficult to simulate actual situation.
本文从数值模拟的角度提出了建立井下瓦斯抽放数值模型的初步方案，即将边界条件等效和模拟时间前推。
The author makes the proposal of establishing a preliminary underground gas drainage numerical model, which is the equivalent of boundary conditions and shift forward of initial conditions.
建立了含内热源的液池内自然对流与冷却盘管内强制对流耦合传热的三维物理、数学模型，进行了相应的数值模拟计算。
Three-dimensional physical and mathematical models for the coupled heat transfer of natural convection in a liquid pool with heat source and forced convection in cooling coil tube are established.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
基于多重线涡模型（MLVM），本文建立了一种计算机时少、收敛性强的适用于大迎角涡流势流数值模拟的迭代算法。
A robust iterative method suitable for the numerical simulation of vortex flows at high angles-of-attack is established based upon the multiple line-vortex model (MLVM).
建立了描述外磁场作用下温度敏感型磁流体热磁对流特性的数学模型，数值模拟了回路中热磁对流的流动与传热特性。
A mathematical model is established for investigating the characteristics of thermomagnetic convection in the temperature-sensitive magnetic fluid in the presence of an external magnetic field.
模型试验验证结果表明，采用本文建立的数学模型对溢流坝水流进行数值模拟是可行的。
The results suggest that it is feasible to carry out maths modelling of the overflow dam flow with the maths model established in this paper.
模型试验验证结果表明，采用本文建立的数学模型对溢流坝水流进行数值模拟是可行的。
The results suggest that it is feasible to carry out maths modelling of the overflow dam flow with the maths model established in this paper.
应用推荐