其次应用网格粗化技术，再结合生产动态建立油藏数值模拟模型；
Secondly, the reservoir numerical simulation model is developed by using gridding technology integrated with production performance.
本文以外节点直接差分法，建立了铸件凝固温度场的数值模拟模型。
A model of thermal field of casting is developed by using direct difference (outside node) method.
提出了变频蒸气压缩式制冷系统在稳态和非稳态下的两种数值模拟模型。
Two numerical models was presented to simulate the transient and steady state behavior of a vapor compression refrigeration system.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
根据四川气田的特点，建立了一种裂缝性底水气藏单井水侵研究的数值模拟模型。
In the light of the characteristics of Sichuan gas fields, a numerical simulation model of researching water invasion of individual well in fracture gas reservoir with bottom water is set up.
建立了可靠的辊弯成形数值模拟模型，研究了材料参数对高强钢辊弯成形产生边波的影响。
The effect of material properties to wavy flange in high strength steel roll forming was investigated.
本文首先介绍了“准三维”渗流系统的数值模拟模型，并为该模型提出了一种联立同步解法。
This paper firstly introduces a numerical simulation model of Pseudo-3-D seepage system and presents a simultaneous synchronous solution for it.
本文利用自由电子激光的加速器理论，建立了单粒子非线性运动方程及其非自洽数值模拟模型。
By use of accelerator theory in FEL studies, single particle, nonlinear equations of motion with corresponding non-self-consistent computer code is established.
文章结合试井分析，确定了裂缝几何尺寸和裂缝导流能力，对低渗油田某井建立了数值模拟模型。
In combination with the well test analysis, the fracture geometry and conductivity are calculated and a numerical simulator is built for a real well in a low permeability oilfield.
论文的第四章给出CARM放大器数值模拟模型，对数值模拟过程中的参量计算，程序流程图做了详细的论述；
The forth chapter introduces the Numerical simulation model of coaxial-waveguide CARM amplifier, gives out parameters computation, and procession flow charts.
模拟结果表明，流动单元约束的油藏数值模拟模型具有初始拟合程度高、模型修改程度低、能够更精确的反映层内和平面剩余油分布的特点。
The result of the simulation indicates that the reservoir numerical simulation restricted by fluid flow unit has many advantages in history matching and precision of remaining oil prediction.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
结果表明，本文建立的分区交界面数值计算模型是可靠的，可用于处理几何形状复杂的流场模拟。
The result shows that the numerical calculation model of interface of block-structured grids in reliable and can be used for complex geometry shape.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
提出了数值模拟稠密气固两相流动的多重格子-真实轨道模型（MLAT模型）。
To simulate the cluster formation in dense two-phase flow, a multi-lattice actual trajectory (MLAT) model is developed.
经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
设计了一个数值模型来模拟一个反应物在明胶层中边扩散边在油珠界面上与另一个反应物反应的动力学过程。
A numerical model was designed to simulate the kinetic process of diffusion and reaction of one reactant with another on the interface of droplets in a gelatin layer.
通过计算机数值模拟，得到了单速车道和多速混合车道元胞自动机交通流模型的基本图，并对这两种模型的交通流特性进行了分析和讨论。
Via computer numerical simulation, the fundamental diagrams of the single-speed lane and multi-speed lane CA traffic flow models are got, and these two models' traffic flow characters are presented.
基于速率方程建立了线性光放大器(loa)的数值模型，模拟了线性光放大器的增益钳制特性。
The numerical model of the linear optical amplifier (LOA) is built based on the rate equations. The gain clamping characteristics of LOA are simulated.
在做数值模拟之前，需要先建立气管的几何模型。
In order to perform numerical simulation, geometric model of trachea is needed.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
然后，采用火焰面模型对该湍流扩散火焰进行了数值模拟并和实验数据进行了比较，考察了火焰面模型的精确程度和模拟深度。
Then, by using the flamelet model, numerical simulations of Flame D were performed and the modeling accuracy and depth of flamelet model are investigated.
文章根据平面应变假设，建立了合理的数值模拟研究模型。
This paper use the plane strain hypothesis to build a reasonable study model of numerical simulation.
然后采用通用的有限元程序ANSYS模拟模型得到其数值解。
To get numerical results, the general finite element program-ANSYS was employed to simulate model.
使用两步化学反应模型对简化的CDE 模型做了二维数值模拟研究。
Two dimensional simplified model of CDE was simulated by two step chemical reaction model.
经过模拟计算与实验对比，验证了该数值模型的模拟效果。
The simulation results is close to that of the bench test, which validates the effect of this numerical model.
利用VIP模拟器和两层地质模型首次进行了周期注水的油藏数值模拟研究。
By using the VIP simulator and a two-layer model, for the first time, the numerical reservoir simulation for the cyclic flooding have been studied.
利用VIP模拟器和两层地质模型首次进行了周期注水的油藏数值模拟研究。
By using the VIP simulator and a two-layer model, for the first time, the numerical reservoir simulation for the cyclic flooding have been studied.
应用推荐