其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
建立MRCTCTPDF的数学模型，通过一个数值实例验证模型的有效性。
We build the mathematic model about the MRCTCTPDF, then validate it by adopting an numerical example.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
并利用有限差分方法，对温度场数学模型进行数值求解。
Numerical solution is given to mathematical model of formation temperature field by full implicit finite difference method.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
本文从非接触电能传输系统的高阶数学模型出发，描述了频率分叉现象，并且用数值方法界定了分叉区域。
This paper on the basis of high order mathematic model, described the frequency bifurcation phenomenon, and used numerical method to bound the bifurcate region of parameter.
采用物理图像分析，建立简单的数学模型，求解并获得了有限空间气溶胶浓度场函数表达式，并进行相应的数值分析。
The mathematic model is set up by using physics image analysis, the expression of aerosol concentration field in limited space is derived, and the correspondent numerical analysis is .
建立了使用滑动轴承的CVE -2型混沌激振器所产生的运动的数学模型，并对其进行了数值仿真和混沌识别。
The mathematical model for the motion of CVE 2 type chaotic vibration exciter was set up and its numerical simulation and chaotic identification were carried out.
较为详细地论述了水平井油-水两相渗流数学模型的建立，数值求解方法以及模拟计算机软件的研制和应用。
Establishment of a finite element mathematical model for the flow, its numerical solution, the associated computer program and the application are presented in detail.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
采用一种简单的数值积分动态建模方法建立了大惯性温度传感器的数学模型。
A model of temperature sensors with a great inertia is set up by means of a simple numerical integral method.
建立激光相变硬化过程的温度场数学模型，并应用数值计算预测了相变硬化带的形状和尺寸。
The width and depth of laser transformation hardened layer was evaluated by establishing temperature field mathematical model and applying numerical calculation.
将热力耦合有限元方法与金属微观组织演变数学模型相结合，提出了热变形过程微观组织的数值预报方法。
By integrating the thermomechanical coupled FEM with mathematical model of microstructure evolution, the paper proposes a numerical prediction method for microstructure during hot deformation.
将稠油视为宾汉流体，推导了宾汉流体在非稳态状况时地层孔隙中的压力分布数学模型，并求得了数值解。
Assuming heavy oil as Bingham fluid, a mathematic model of non-steady pressure distribution of Bingham fluid in formation pores is derived, and its numerical solution is obtained.
本文分析了不同型号搪玻璃设备搪烧时，在搪烧升温过程中电炉内的热量传递，建立了数学模型，并进行数值求解。
In this paper, heat transfer in electric furnace is analyzed for variant types of glass lined equipment during raising temreture . mathematical model is set forth and is solved by numerical method.
应用数值分析和计算几何理论，根据船体首部线型特点，建立首柱轮廓线数学模型；
Applying theories of numerical analysis and higher geometry, the corresponding mathematical model of stem line is established according to different stems.
建立了具有线性阻尼的秋千参激振动的数学模型，并对秋千的运动行为作了理论分析与数值模拟。
A mathematic model of the linear damped oscillation of swing with parameter exciting is presented. The theoretical analysis and numerical simulation for the motion behavior of swing is done.
针对压铸特点，建立了适合于数值模拟的压铸摸具温度场数学模型，确定了压铸过程的边界条件。
According to the characteristic of die casting, the mathematical model suitable for numerical simulation of die casting dies was set up and the corresponding boundary conditions were determined.
利用数值模拟技术，对台车式热处理炉的速度场进行了数学模型实验研究。
The mathematical model experimental study about velocity field in a car-bottom heat treating furnace is carried out by using numerical simulation technology.
介绍了模拟移动床色谱数学模型和数值分析方法的最新进展。
The latest progress in SMBC model and its numerical technique was introduced in this paper.
给出了一对多单因子服务部署问题的数学模型和求解该问题的遗传算法，并通过数值模拟表明了算法的有效性。
The model and the genetic algorithms for one-to-many single factor service placement problem are given. Numerical experimental simulations support the feasibility of the model and the algorithms.
在建立岩盐水压致裂溶解过程的固流传质耦合数学模型的基础上，对该过程进行了数值模拟。
On the basis of mathematical model of solid-fluid mass transfer coupling in the process of hydraulic fracture and solution of rock salt, the corresponding numerical simulation is carried out.
本文对坡地水文过程的数学模型、实验检验、数值解方法以及简化途径等各环节研究作了分析评述。
Research on hillslope hydrological processes is reviewed including mathematical models structure, model testing, numerical solution, and methods for model simplification.
建立了裂缝性砂岩油藏周期注水数学模型，分别给出了数学模型的数值解和解析解。
The cycle injection math model for fracture stone reservoir is established, and both of analysis solution and numerical solution are given in this paper.
建立了快速高热流密度激光作用下含湿多孔材料传热传质数学模型，并采用恰当的数值处理方法进行了数值计算。
Mathematical model of laser beam irradiates the surface of a water-containing porous materials is presented, and related numerical method is used to solve the equations.
建立了单基发射药柱热自燃的数学模型，根据模型利用数值模拟的方法计算了单基发射药的中心温度与其剩余能量，并对中心温度的模拟结果与实验结果进行了比较。
A mathematical model of single base propellant column is established, the core temperature and residual energy of single base propellant are calculated by means of numerical simulation and this model.
应用i MPES方法将数学模型转换为隐式求解压力、显式求解饱和度的数值模型。
IMPES method is used to convert the mathematical model into a numerical model for an implicit solution of pressure and an explicit solution of saturation.
通过与国外结论的比较证明了本文理论分析中所建立的数学模型、采用的数值计算方法是准确和合理的。
The mathematical model and numerical method used in theoretical analysis is proved to be accurate and reasonable through comparison with foreign conclusions.
从数值模拟的角度论述了数学模型，最后举例说明了成型过程仿真研究的合理应用。
Math model was discussed according to the numerical simulation. The reasonable application of molding process's emulation study was expounded by taking an example.
数学模型验证的结果和数值结果的热量消耗计算机辅助管理控制系统操作在图2所示。
Results of the mathematical model verification and the numerical results of heat consumption computer-assisted management control system operation are shown on Figure 2.
应用推荐