交输，燃油支管之间的交连设备。 可使燃油从飞机一侧流向邻近的发动机或在机身另一侧的发动机。
CROSSFEED, An interconnection between fuel manifolds for fuel flow from one side of the airplane to an adjacent engine or one on the other side.
本实用新型喷淋管是由主管、支管及喷嘴组成。
The utility model relates to a sprayed pipe, consisting of a main pipe, branch pipes and nozzles.
水平支管中马赫反射三波点迹线始于右尖点下游。
The triple-point trajectory characterizing Mach reflection locates downstream of the right corner in the horizontal branch.
三层集水支管的两端分别与两侧相应的三层水平集水管相连通。
Both ends of the three-tiered water collecting branch pipe respectively communicate with the corresponding three-tiered horizontal water collecting pipe on both sides.
许多烟气加热过程涉及到较大流量多支管流量分配均匀性问题。
Many heating process with smoking gas involves the uniformity problem of flow distribution with larger flux in multi-branch pipe.
在水平和垂直支管中，诱导激波出现由规则反射向马赫反射转变。
The transition of leading shock from regular reflection to Mach reflection respectively happens in the horizontal and vertical branches.
焊缝编号应根据管线介质流向进行编号，原则上应先主管后支管。
Welding seam should be numbered according to pipeline medium set, in principle, main pipe prior to branch pipe.
结论今后应重点加强饮用水源的卫生防护和用户支管的更新、改造。
Conclusion Efforts should be made on the hygienic protection of drinking water source and reform and renewal of customer pipes.
分支装置使用管托状的密封件通过主管上的管口将支管连接到主管上。
A branching device connects a branch pipe to a main pipe through an orifice in the main pipe utilizing a saddle-like sealing member.
实验结果揭示了三分支管的一些流动特性，为进一步的研究打下了基础。
The results reveal some flow characters of manifold junctions, which lay the foundation of further study of turbulent flow for manifold junctions.
介绍了在螺旋焊缝汇管上焊接支管时的防变形措施、焊接方法和检验结果。
This paper introduces the measure, welding method and inspection result to prevent the welding deformation formation of spiral-seam pipe header after tapping.
本文提出的支管优化设计的图解法，可用于两种管径的管段组成的支管设计。
In this paper is presented a diagram method of optimal design for sprinkler lateral, by which can be designed the laterals with two diameters.
使用时，转动阀盘指针对准刻度上的某一支管，进液主管的液体就流向该支管。
When in use, the indicating pointer of a valve plate is rotated to point to some branch pipe on the dial plate, and the liquid of the liquid inlet main pipe flows to the branch pipe.
分析了进气总管和进气支管的管长、管径以及进气腔容积对充气系数的影响规律。
The effects of intake chamber volume, diameter and length of inlet duct and inlet manifold on volumetric efficiency were analyzed.
高于排湿口与排湿支管的对接处的排湿支管上装有一个调节风量大小 的调节板。
An adjusting plate for adjusting wind force is mounted on a humidity-discharging branch pipe which is higher than the joint of the humidity outlet and the humidity-discharging branch pipe.
引气活门，气源系统内，使来自发动机或辅助动力装置的空气进人气源支管的活门。
BLEED valve, a valve in the pneumatic system for air supply from the engine or auxiliary power unit to the pneumatic manifold.
这种较大流量气流的多支管流量均匀分配问题是较复杂的，但也是工程应用中不可避免的。
The problem of flow uniform distribution with larger flux in multi-branch pipe is complicated but inevitable in projects.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
该流式细胞仪的废液排放装置包括废液排放管、第一支管、第二支管和压力波动隔离单元；
The waste liquid eductor of the flow cytometry comprises a waste liquid discharge pipe, a first branch pipe, a second branch pipe and a pressure fluctuation isolated unit;
这些街道污水管又相结一条污水支管。此支管与次干管连接，然后经主干管将污水送至污水处理厂。
Several of these flow into a branch sewer, which joins first a sub-main and then a main sewer taking it to the treatment plant.
分别比较了轴向压缩胀形和复合胀形中管件支管顶部双向拉应力、应变以及支管高度等指标的变化。
The variation of two-way tensile stress, strain distribution and branch height in the axial compressive bulging and compound bulging were compared respectively.
发电站蒸汽管道的支管连接部位以及与之相连接的支管接管座处出现的热疲劳裂纹，严重影响了发电机组的安全运行。
The steam pipe and correlative branch pipe of power plant are detected to appear thermal diffuse crack, which influence the normal run of the generator severely.
文中所得结果为较大流量气流的多支管流量均匀分配技术的应用奠定了基础，对各类流量分配问题具有重要的参考价值。
The results established foundation for the application of flow uniform distribution in multi-branch pipe and gave reference for all kinds of problem of flow distribution.
利用3维粒子动态分析仪（3D-PDA）测量了矩形截面三分支管试验件的3维速度场，以验证改进后的程序软件的可靠性；
The three dimensional velocities of the manifold junction with a rectangular section were measured by use of three dimensional particle dynamic analyzer (3D PDA) to verify the modified KIVA program.
在传统的喷灌支管设计中，支管上各喷头等间距布置，但是沿支管灌水量不相等。 为此提出一种实现沿支管灌水量相等，但允许喷头间距变化的支管设计方法。
A new designing method for sprinkle-irrigation laterals, in which the spacing of sprinklers can be changed with the outflow of sprinklers along the lateral, is developed.
对紫铜长支管T型管复合胀形工艺进行了试验研究，介绍了包括冲头挤压力的公式与计算，试验中所用复合胀形模具结构和部分重要零件的设计与选取及试验结果。
A technology to form copper long-branch tee pipe directly in compound forming of bulging and extrusion is developed, the formula and calculation of the forming force are introduced.
对破坏的过程进行分析后，提出了软土地基敷管弯管支墩基础的处理建议。
According to analysis on the destruction process, treatment advice was put forward on bend buttress pier foundation for laying pipe in soft soil subgrade.
介绍了大型热油泵入口管系的柔性设计方法、管道的布置方式、支吊架的设置方式。
Flexibility design method of large scale hot oil pump inlet piping is expounded as well as the layout of pipeline, support and hanger.
介绍了大型热油泵入口管系的柔性设计方法、管道的布置方式、支吊架的设置方式。
Flexibility design method of large scale hot oil pump inlet piping is expounded as well as the layout of pipeline, support and hanger.
应用推荐