本文探讨搅拌速度、时间与原糊流动性的关系。
Discusses the relation between paste flowability and the speed and time of stirring.
搅拌速度为可承受的最高转速，非指电机最高转速。
Stirring speed can withstand the maximum speed, maximum speed of the motor non-means.
除此之外，温度，搅拌速度等也对污泥脱水有一定的影响。
It means sludge dewatering was not better even with excessive cationic degree and dosage.
探讨了电流密度、电解时间和搅拌速度等因素对此法的影响。
The influencing factor such as current density, electrolysis times, and agitation speed are investigated.
讨论了镀液中各组分含量、温度及搅拌速度对化学镀镍的影响。
The influences of each component content in plating bath, temperature and stirring speed on electroless nickel plating were discussed.
考察了超声频率、功率，超声时间和搅拌速度对产品粒度的影响。
The effects of frequency, power, action period and stirring velocity of ultrasound on the size of blowing agent ADC are experimentally investigated.
通过实验对反应温度、反应时间、搅拌速度等工艺条件进行了优化；
Through optimizing of process conditions, such as temperature, reaction time and stir speed etc.
即降低降体温度、搅拌速度及适当剪切时间有利于细小球形晶粒的形成。
The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.
研究了搅拌速度和搅拌方式对MH介质冷却特性及钢件淬火质量的影响。
The effect of stirring rate and stirring method on the cooling characteristics of MH quenchant and the quenching quality of steel pieces is investigated in this paper.
并分析讨论了粘度、润湿性、搅拌速度、搅拌时间对粒子收得率的影响。
The influence of viscosity, wettability, agitating rate and time on "particle gaining rate" are analysed.
释放面积，桨的搅拌速度及释放介质均影响脂质体凝胶的溶蚀及药物的释放。
Drug release rate was significantly influenced by release area, stirring speed of peddles and the sorts of dispersion mediums respectively.
考察的主要因素包括药物浓度、温度、表面活性剂和架桥剂用量及搅拌速度。
The major factors investigated included the concentration of drug in ethanol, temperature of system, the amounts of surfactant and bridging agent as well as agitation speed.
分别考察了机械活化时间、温度及搅拌速度对壳聚糖溶解度和分子质量的影响。
The effects of different mechanical activating time, temperature and stirring speed on solubility and molecular weight of chitosan had been examined respectively.
乳化剂、引发剂用量及反应温度、反应时间和搅拌速度对乳液聚合反应有重要影响。
The emulsion polymerization also was influenced by the dosage of emulsifier and initiator, reaction temperature and reaction time and agitating speed.
产物的平均粒径，吸水率受搅拌速度、悬浮稳定剂用量、交联剂用量等因素的影响。
The rate of agitation and the amount of suspension stabilizer and crosslinking agent have great effects on the average diameter and water-absorbency.
超滤前的搅拌时间和静止时间、超滤时的搅拌速度等均对双酚A的截留率有一定的影响。
Stirring rate at the time of ultrafiltration, stirring time and setting time before the time of ultrafiltration which have a few effect on the removal efficiency of bisphenol A.
实验中，我们测定了不同搅拌速度下不同浓度氢氧化钙悬浮液吸收纯二氧化碳气体的速率。
In the experiment, we measured the absorption rate of carbon dioxide by slurry in different stirring rate.
并讨论制备乳化蜡的影响因素，如： 表面活性剂的选择、温度、时间、搅拌速度等。
The factors affecting the preparation, such as the choice of surfactants, temperatures, time, stirring rate and so on were discussed at the same time.
利用扫描电镜和紫外光谱考察了内相聚合物浓度和搅拌速度对微球粒径和药物包封率的影响。
The effects of polymer concentration and agitation rates on the size of microspheres and drug incorporation efficiency were studied by scanning electronic microscopy (SEM) and UV-spectrophotometry.
有手动、自动两种操作动能，自动指示终点。搅拌速度无极调动，设有终点指示，蜂鸣报警。
It has two functions of manual operation and automatic operation, The blender is speed variation. It is equipped with end-point indication light buzzer and automatic lock equipment.
空心玻璃微珠极易与树脂混合，一般建议在较慢的搅拌速度下在混合的最后阶段加入空心玻璃微珠。
It can be easily mixed with resin, and is proposed to be added at the final stages of mixing with a slower mixing speed.
作者采取低温分散、交联，分步加入交联剂和调节搅拌速度等控制手段，有效地解决了上述问题。
These problems can be solved through the control of the dispersion and crosslinking temperature, the agitation rate and the feeding manner of the cross-linking agent.
探讨了乳化剂的种类、用量，制备乳化蜡的搅拌速度、乳化时间、温度等因素对乳化蜡稳定性的影响。
The effects on stability of emulsifying wax such as emulsifier type, quantity, stirring speed, emulsifying time and emulsifying temperature were discussed.
详细考察了硫酸和催化剂的用量、浸出温度、浸出时间、液固质量比、搅拌速度等因素对浸出率的影响。
The effecting factors such as consumption of sulfuric acid, catalyst, temperate, time, ratio of liquid to solid, and stir speed on leaching rate has been studied in detail.
研究发现，不同固液比、复合材料粒径不同、不同搅拌速度及不同气氛对TCAA的降解速率都有影响。
The degradation rate of TCAA was found to be related to the amount or particle size of the composition material and stirring speed.
结果表明，提高胶液温度和搅拌速度，延长搅拌时间，增加胶液密度，可以提高着色剂在胶液中的稳定性。
Results showed that with the increase of the adhesive temperature, the mixing speed, the adhesive density and the mixing time, the stability of pigment in adhesive could be improved.
分别考察了相比、乳化剂及其用量、引发剂及其用量、搅拌速度、加料方式、反应温度等对实验结果的影响。
The effects of dosage, species of emulsifier, initiator, relatine molecular mass modulator, reaction temperature, speed of stirring and the way of feeding on the process were investigated.
分别考察了相比、乳化剂及其用量、引发剂及其用量、搅拌速度、加料方式、反应温度等对实验结果的影响。
The effects of dosage, species of emulsifier, initiator, relatine molecular mass modulator, reaction temperature, speed of stirring and the way of feeding on the process were investigated.
应用推荐