按此控轧控冷工艺能生产出高等级优质钢筋。
High grade and high quality reinforcing steel bar can be produced according to this control rolling and cooling process.
细晶粒低碳钢生产的关键技术在于控轧控冷。
The key technique of hot rolling low carbon ultra-fine grained steel strip consists in controlled rolling and controlled cooling.
上述结论为X80管线钢控轧控冷工艺制定提供依据。
The conclusions provide the basis to controlled rolling and controlled cooling of X80 pipeline steel.
采用HTP工艺可以有效降低其控轧生产时的轧制负荷。
The rolling load resulted from the controlled rolling process during production can be decreased effectively by application of HTP.
交货状态为:热轧,控轧,正火。经供需方协议加做探伤。
Delivery state: hot rolling, controlled rolling, normalizing. After the agreement for doing inspection.
通过控轧控冷工艺提高了带钢综合性能,节约了生产成本。
Adoption of the CRCC process improves the general property of strips and reduces the production cost.
本文研究了轧后快冷时间对控轧低碳钢板组织和力学性能的影响。
This paper intends to study the influence of rapid cooling time after rolling on the microstructure and mechanical properties of low-carbon steel.
超高碳钢控轧后进行超细球化预处理,并在不同的温度下进行二次淬火。
Ultra-fine spheroidizing pretreatment technology was applied to the 1.41%C hot-rolling ultra-high carbon steel. Then the second quenching was carried out at different temperature.
本文通过对Q 3 4 5d钢加入微量合金元素V并进行控轧控冷试验。
This paper carries out controlled rolling and controlled cooling test by means of adding microalloy element V to Q345D steel.
用金相方法观察了采用临界奥氏体控轧控冷工艺生产的带肋钢筋的组织及其分布。
The microstructure and its distribution of ribbed bar, produced by critical austenite control rolling and control cooling, were observed by means of microscope.
我公司通过采用炉外精炼、电磁搅拌、优化控轧控冷参数等手段,提高了产品实物质量。
The product quality is improved by means of smelting outside oven, electromagnetic stirring and optimizing rolling control and coldness control data.
结果表明,在具有低温轧制能力的高线轧机生产线上,采用控轧控冷工艺生产高强度钢筋是可行的。
The result shows that production of high strength screw bars is reasonable by the control rolling and control cooling process on high-speed wire mill with the capacity of low temperature rolling.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
利用微合金化技术及ASP连铸连轧工艺和控轧控冷工艺,济钢自主研发了S450热轧管线钢带产品。
S450 hot rolled strips for line pipe is researched and developed through the technology microalloying, ASP and the processes of controlled rolling and controlled cooling in Jinan Iron and Steel co.
结果表明,控轧控冷代替常规轧后回火工艺的途径是可行的,并有力地支持了粒状贝氏体的扩散型长大学说。
The replacement of tempering after rolling with TMCP for bainite transformation in SBL steel is a kind of diffusion type.
根据钢板的控轧经验,结合H型钢轧制的特点分析控轧在轧制中运用的具体问题,制定H型钢控轧工艺方案。
Based on the experience in plate, controlled rolling and analysis of the problems of application of controlled rolling to H-beam.
宝钢高扩孔用热轧酸洗钢带是采用先进的控轧控冷技术生产的具有高的扩孔率、优良的成形性能和焊接性能。
Using advanced TMCP technology, Baosteel's hot-rolled pickled strip for high hole expansion has high expansion rate and excellent forming and welding properties.
介绍了控制轧制技术在小型材生产中的应用,以及几种典型的控轧控冷工艺布置,可为小型生产厂家提供参考。
Its application in the small section production was introduced. Meanwhile, several types of processing arrangement were put forward, which are references for small section production industries.
在热模拟试验机上研究了控轧控冷工艺对微合金化低碳贝氏体型非调质钢组织性能的影响,并探讨了贝氏体转变机制问题。
The effect of TMCP parameters on microstructure and property was studied, and a controversial question about bainite transformation mechanism also was discussed.
对舞钢采用控轧控冷工艺生产的低碳微合金钢的组织形貌及其形成条件进行了分析,认为组织细化是保证低碳微合金钢良好强韧性配合的重要因素。
The microstructure characteristic and its forming conditions of the low-carbon microalloyed steels were analysed, which were produced by controlled rolling and cooling in Wuyang Iron and Steel Co Ltd.
现提出用张力状态方程设计张力最优控制器,进一步将张力最优控制器与预控速度的恒张力控制系统结合,设计热连轧张力复合控制系统的新方案。
Now a new plan is put forward that an optimal tension controller is designed by using tension state equation, and still further the tension comp.
结果表明,通过成分调整和合理的轧后控冷,能够用低合金替代传统的V微合金化工艺进行HRB400螺纹钢筋的生产。
The results show that producing HRB400 reinforced bar can substitute low alloy for conventional V microalloy process by composition adjusting and rational cooling control after rolling.
分析了首钢中厚板轧后处理中的水幕控冷工艺过程,提出了一种双闭环流量比值模糊控制系统方案。
The water-curtain controlled cooling process after rolling steel plate in Shougang Group is analyzed, then a double closed-loop fuzzy control scheme for flow ratio is proposed.
根据螺纹钢筋轧后控冷中的热交换特点,从理论上进行了分析与推导,并利用数学方法进行简化,得到结构简单实用的数学模型。
In this paper, a model was deduced from the heating exchange of screw rod in cooling and was simplified with mathematics. Its construction was simple and practical.
现提出用张力状态方程设计张力最优控制器,进一步将张力最优控制器与预控速度的恒张力控制系统结合,设计热连轧张力复合控制系统的新方案。
Now a new plan is put forward that an optimal tension controller is designed by using tension state equation, and still further the tension comp...
现提出用张力状态方程设计张力最优控制器,进一步将张力最优控制器与预控速度的恒张力控制系统结合,设计热连轧张力复合控制系统的新方案。
Now a new plan is put forward that an optimal tension controller is designed by using tension state equation, and still further the tension comp...
应用推荐