该文分析了无人直升机飞行控制系统软件实现要求。
The requirements of software implementation for unmanned helicopter flight control system are analyzed in the paper.
最后介绍了铁路客车空气调节控制系统软件系统设计。
Finally, it is presented the software of the air condition control system of rain passenger wagon.
针对通风目的和通风方式的多元化，开发了控制系统软件。
The software of control system has been exploited to aim at diversity of ventilative aims.
本篇论文研究了“发酵过程优化操作控制系统软件”的设计和实现。
The design and application of "The Software of Optimal Operation and Control System in Fermentation Process " are studied in this dissertation.
开发了真空感应系统专用控制软件，同时介绍了控制系统软件的主要功能。
A special control software has been developed for the vacuum induction system, of which the main functions were given.
简述了系统的功能与流程、硬件配置及结构、计算机控制系统软件的设计与开发。
The function and flow of the system, hardware configuration and the development of the software for the computer controlling system are introduced briefly.
很明显，版本控制系统软件是跟踪源代码所必需的，它对于解决应用程序配置问题有非常大的帮助。
It is clear that version control system software is necessary for keeping track of your source code and that it can help in a great deal with the application configuration problems discussed here.
在软件设计部分中，首先进行了开环系统软件设计和电压电流双闭环控制系统软件设计。
In the design of the software part, this paper gives the software design of open-loop control with SPWM and the software design of voltage-current double closed-loop control.
整个下位控制系统软件开发采用了开放式、模块化的设计方法，方便用户使用及功能扩展。
The whole lower software system ADAPTS the method of open and modularization architecture, it's convenient for users and function expand.
该系统由服装样板数据输入、缩放、排料、裁剪控制系统软件及服装自动裁剪机本体组成。
The system consists of the following subsystems! Data inputting, lofting, the template arrangement, and cutting automation.
VI设计集团设计的全自动化控制系统软件的BiorepPerifusion系统。
VI design Group designed the full control system software to automate the Biorep Perifusion system.
通过实验验证了控制系统软件、硬件方案的可行性和多级控制算法、控制策略的正确性和有效性。
The experiment results show the feasibility of control system's software, and hardware, and the correctness and effectiveness of the multi-level control algorithm and control strategies.
整机控制软件设计：对控制系统软件从结构、功能任务、界面菜单等方面进行了系统的规划和设计。
Controlling software system design: planning and designing the controlling software from structure, function and task, interfaces, etc.
介绍了机器视觉的概念，给出了基于机器视觉技术的药片包装检测系统的硬件组成及控制系统软件模块结构。
This paper introduces the machine vision. The hardware system and the control system software module of image machine vision inspection system in the tablet packing are also described.
在已经配置的嵌入式控制系统软件和硬件环境的基础上，建立了在嵌入式编程过程中需要使用的交叉开发环境。
Basing on the condition of hardware and software of embedded control system, the cross-development circulation that is necessary when the programs of embedded system are compiled is built up.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
在软件方面，以SVPWM为核心控制算法，用汇编语言完成了整个控制系统软件的编制，包括保护模块、通讯模块等。
As for software, using assemble language of DSP to compile the whole program, including SVPWM module, communication module and protection module.
最后设计了气辅注射成型高精度实时注气控制系统软件，实验证明该控制系统控制性能良好，能达到令人满意的控制效果。
Then, a software with simple operation and complete function designed for the gas-injection control of GAIM is developed, whose control effect is proved to be perfect by experiments.
介绍了空气压缩机PLC控制系统组成、保护功能、控制原理、系统通信、系统信号的采集，以及控制系统软件设计思想。
The paper describes the composition, protection function, control principle, system communication, collection of system signals and design idea of the PLC system of air compressors.
控制系统软件设计主要包括主程序、冷却水参数检测子程序、激光功率控制子程序与人机界面子程序等四部分的程序设计。
The control system software contains the main program, the cooling water parameters detection subprogram, the laser power control subprogram, and the human machine interface subprogram.
本文的研究对象是混凝土斜拉桥的施工控制系统，主要工作是施工控制的理论与核心技术的研究以及施工控制系统软件的开发。
The thesis deals with a theory and some research on key technologies of construction control of PC cable-stayed bridges. A software for general use is also developed.
在保留原先控制系统软件流程宏观设计思路的前提下，对运动控制任务的软件架构进行了调整，对运动控制作业进行了重新规划。
On the reservation of original thought of the system software, this paper adjusts the software architecture of motion control task, and re-plans the driven strategy of shaft motor and step motors.
以TMS320F2812为控制核心，设计了系统的控制驱动电路、采样电路、保护电路、人机接口…更多电路等硬件部分和控制系统软件。
Using TMS320F2812 as the core of the control system, drive circuit, sampling circuit, protection circuits, man-machine interface circuit hardware components and control system software were designed.
本文根据作者在开发远程进程控制系统软件，详尽阐述了远程进程控制系统的系统设计，该系统主要分为两个模块，远程控制模块和进程控制模块。
This thesis elaborating the system design of the distant process control system in details. This system can be divided into two modules, the distant control module and process control modules.
主要介绍了OMRON公司的CPM1A系列在太阳能热水器自动控制系统中的应用，重点阐述了系统的硬件构成及系统软件的设计过程。
Application of OMRON CPM1A series PLC in solar water heater automatic control system is mainly introduced, emphasises on the system hardware constitution and the system software design process.
论述了一种用于家用燃气灶具检测的自动控制系统的功能与结构、硬件与系统软件的设计以及该系统的优势。
The functions and structure of an automatic control system for detecting domestic hot-plate , the design of hardware and system software and the dominance of this system are expounded.
介绍了900吨大型架桥机自动控制系统的结构组成、控制功能、控制方式、系统软件设计以及系统操作和实际应用效果。
The paper introduces 900T large Bridging Machin Automation control system structure Configuration, Control system function, control mode, software system design And Applications results.
介绍了900吨大型架桥机自动控制系统的结构组成、控制功能、控制方式、系统软件设计以及系统操作和实际应用效果。
The paper introduces 900T large Bridging Machin Automation control system structure Configuration, Control system function, control mode, software system design And Applications results.
应用推荐