己完成了单片机通信控制系统硬件设计和软件编写与调试任务；
I have completed hardware design of micro-control system, software writing and debugging.
本文介绍了计算机在油田集输站中的应用，给出了自动控制系统硬件设计，系统具有稳定、可靠等特点。
This paper introduces the application of computers at an oilfield gathering station. It gives out hardware design of the automatic control system which possesses stable and reliable characteristics.
在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。
On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
本文介绍了协同式三自由度运动平台计算机控制系统的硬件设计及实现方法。
This paper presents hardwares design and realization of computer control system of three degree - of - freedom motion platform.
采用开放式架构设计将重点从硬件设计转向以控制系统为中心的系统设计，同时也增加了软件设计的灵活性。
An open architecture design will add flexibility by shifting the focus of the control systems from being hardware-centric to more software-centric.
在此基础上完成了电厂化学水处理控制系统硬件配置和软件设计。
On the basis, it completes hardware configuration and software design of chemical water treatment control system.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
基于CAN总线的飞行控制系统不仅可以节约硬件成本和设计、安装费用，同时还可以节约系统软硬件的后期维护费用。
The flight control system based on CAN bus does not only save hardware cost and installation cost, but also save its later maintenance cost.
在控制系统总体结构设计和硬件设计的基础上，详细论述了自动加煤和自动除灰的程序流程设计。
Based on the design of global structure and hardware of the control system, detailed program flow design of automatic coal stuffing and slag removing is presented.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
论述了一种自动化节水灌溉控制系统的硬件设计、外部连线及其使用功能。
The hardware design, outside connection and the utilization functions of an automatic water-saving irrigation control system is introduced in detail in this paper.
文章分析了这些要求，并提出了控制系统硬件和软件的设计。
Analyzation on those requirements is made and design of both hardware and software for the control subsystem is proposed.
本文介绍了STD总线构成的冗余度机器人实时控制系统的软硬件设计情况。
The design of real-time control system for Redundant Robot with STD BUS is described in this paper.
同时给出了控制算法与控制系统的软、硬件设计。
The software and hardware of the control system and control algorithm based on DSP were designed.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
介绍了一个污水泵站的控制工艺和控制要求，阐述了泵站自动控制系统中plc的硬件、软件设计。
The technology process and the control demands of a waste water pump are presented, and the design of hardware and software based on PLC for the pump station automatic control are described.
用TMS320F 2407作为系统核心控制芯片，对控制系统的硬件电路和软件设计进行了研究。
Additionally the control system's hardware circuit and software design are studied with TMS320F2407 as its core chip.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
另外研究了控制系统的硬件设计和软件编程及采用计算机控制的具体实现方法，较全面说明了复杂计算机控制系统的设计过程。
In addition, the hardware designing and the software programming, also the computer realization method, is studied, so the whole complex design process of the computer control system is studied.
通过对打捆机的分析研究，研制了基于PLC的双CPU模块的棒材全自动打捆机控制系统，描述了控制系统的软、硬件设计方法。
Through the deep theoretical research and analysis on bar binding machine, a PLC control system with double CPU is designed, and the way of designing software and hardware is described.
介绍了冷轧厂双机架平整机PLC4自动化控制系统的设计、硬件组成以及程序设计。
The design and hardware structure and program engineering of PLC4 automatic control system in the double stands temper mill are described.
阐述了PLC在动力滑台的液压传动控制系统中的应用，并从PLC的选择、硬件设计和程序编制等方面对控制系统的设计作了介绍。
This paper introduces the application of PLC in the hydraulic pressure drive control system of power-slipway and the design of the system in PLC selecting, hardware design and programing.
论文给出了基于风向传感器的偏航控制系统的软硬件设计结果。
The thesis accomplishes the software and hardware design of the control system based on sensors of wind direction.
文章介绍了基于80c 196kc为控制核心的激光雕刻机控制系统的硬件设计，实现了对混合式步进电动机和激光电源的控制。
The paper introduces the hardware design of the laser engraving system based on 80c196kc, the control of hybrid step motors and laser power supply.
文章介绍了基于80c 196kc为控制核心的激光雕刻机控制系统的硬件设计，实现了对混合式步进电动机和激光电源的控制。
The paper introduces the hardware design of the laser engraving system based on 80c196kc, the control of hybrid step motors and laser power supply.
应用推荐