1976年7月8日,丹尼斯·卡恩斯(DennisKearns)在一家梅赛德斯服务中心购买了一个雨刷控制器,并带回家给他的父亲。
On July 8, 1976, Dennis Kearns stopped in at a Mercedes service center, bought a wiper control, and brought it home to his father.
因此,研究无刷直流电机无位置传感器控制技术具有重要理论和实用价值。
Therefore, it has important theoretical and practical value to study position sensorless control methods for BLDCM.
介绍了一种全桥脉宽调制芯片A 3952的特点和功能及其在单相无刷直流力矩电机控制中的应用。
Full-bridge PWM motor drive A3952 is introduced in this paper, and an example is given for single phase DC brushless torque motor control.
介绍了无刷直流电动机的控制原理,给出了系统设计的整体方案,并详述了硬件电路和软件程序设计。
In this paper, we introduced the control theory of brushless DC motor, and proposed the design scheme, software method and hardware electric circuit for whole system.
研究了软件锁相环技术在陀螺用无位置传感器无刷直流电机稳速控制系统中的应用。
The software phase-locked loop (SPLL) technology in the steady speed control of permanent magnet brushless DC motor (BLDCM) in gyro was discussed.
卫星姿控飞轮是由三相轮流换向无刷直流电动机驱动的,采用力矩控制(电流反馈)模式。
Satellite attitude control flywheel is driven by three-phase alternate commutating brushless DC motor, schema of which is torque control model (current feedback).
根据无刷直流电动机的特性,讨论了数字pid控制系统的设计原理和实现方法。
The design principle and realization method of the digital PID control system are discussed according to the characteristic of DC brushless motor.
以SPMC65 P 2404 A单片机为核心,设计了一种用于电动自行车的无刷直流电动机调速控制系统。
The design of the speed control system of brushless DC motor based on SPMC65P2404A is implemented, which used in the electric-bicycle.
在无刷直流电动机高性能速度跟踪系统中,由于PI控制的滞后性,无法根据未来动态行为产生较为理想的PWM波形。
In the environment of high-performance drives, the PWM controller can't produce a fine PWM waveform according to the future dynamic behavior, due to the lag of PI regulator.
讨论无刷直流电机、步进电机在旋转飞剪系统中应用时的跟踪控制方案,分析了两种方案的异同。
This paper introduces two control methods of the flying cut, with brushless DC motor and with stepping motor.
介绍了一种基于DSC(数字信号控制器)无刷直流电机无传感器新控制方法,包括工作原理和系统组成。
This paper introduces a new control method of sensorless brushless DCmotor based on DSC, and gives its essential theory and system structure.
本文正是基于这一考虑,对无刷直流电动机的控制技术与控制方法进行研究。
In view of above-mentioned reasons, this thesis makes a detailed study on the control technology and methods to BLDCM.
本文采用了PC机、GMC2407运动控制专业平台来构成一个基于DSP的无刷直流电动机控制的试验平台。
In this paper, a brushless motor control platform which is based on DSP and made of PC and GMC2407 is adopted.
通过设计一种模糊pid控制器,应用模糊算法在线自动整定PID参数的方法,将其应用于无刷直流电动机调速控制系统。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
利用模糊控制实现无刷直流电动机的控制是提高系统性能的有效手段之一。
Achieving the control of brushless DC motor by using fuzzy controller is one of effective means to improve system performance.
实验结果表明本文的工作提升了无刷直流电机的控制性能,使其在高性能的伺服驱动领域具有更广阔的应用前景。
The experimental results show that this method greatly improves the control performance of the BLDCM, making it have extensive application prospects in high performance servo and drive areas.
针对水下作业环境的特点,对机器人的本体结构、磁路结构、控制系统和清刷作业装置等关键技术进行了系统的研究。
According to the particular condition of underwater robot work, the paper studies the related key technology, including body structure, magnetic structure, control system, cleaning work set etc.
中文摘要在无刷直流电机控制中,转子位置的检测至关重要。
The detection of rotor position plays an important part in the control of BLDCM.
本论文详细阐述了如何设计一个无刷直流电机的控制芯片。
In this thesis, how to design a brushless DC motor control chip is discussed in detail.
根据无刷直流电动机的特点和DSP芯片的功能,提出了基于DSP的控制方案。
According to the characteristic of BLDCM and the function of the chip, sensor control solutions which are based on DSP technology are presented.
采用磁场定向矢量控制技术的无刷双馈电机调速系统,其性能基本能够满足运行要求,但存在超调及动态稳定慢等问题。
The brushless doubly-fed machine (BDFM) is based on the technic of field oriented control and the performance of its adjustable-speed drive can ultimately meet the need of the operation.
论文在介绍常用的无位置传感器无刷直流电机控制方法的基础上,详细分析了“反电动势法”无刷直流电机控制原理。
In this paper the common methods of sensorless control of BLDCM are introduced, and the principle of back-EMF method is illustrated in detail.
永磁无刷伺服电机的换相和控制都需要准确的转子位置信息,然而位置传感器有其难以克服的缺点。
The exact rotor position is required while a permanent magnet brushless servo motor (PMBSM) is under commutation and control. Howere, position sensors have some fatal defects.
该系统通过红外雨量传感器检测雨量大小,使用模糊控制算法和脉宽调制技术调节雨刷器的速度;给出了系统的总体结构和具体设计方法。
This system senses the amount of rainfall by the infrared rain sensor, and adjusts the speed of wiper based on the fuzzy control algorithm and pulse width modulation technology.
基于80c 196MC芯片的无刷直流电机控制系统,包括80c 196 MC、IPM、速度显示及速度设定模块。
The control system for the brushless DC motor based-on 80c196mc consists of 80c196mc, IPM, speed displaying and speed setting module.
最后,基于TI公司的DSP芯片TMS320F 2812和IR公司的驱动芯片IR 2133设计了直流无刷电动机控制系统的硬件电路,并编写了相应的软件。
Finally, designs brushless DC motor control system hardware circuits based on TI's DSP chip TMS320F2812 and ir's IR2133, and compose the corresponding software.
介绍了一种永磁无刷直流电机控制系统的设计方案,主要涉及速度闭环和功率模块驱动的硬件电路设计;并通过实验证明该设计可直接用于小型无刷直流电机的控制。
This article presents a design of permanent magnetic brushless DC motor control system and mainly involves the hardware circuit design of speed closed loop and power module drive.
设计了以TMS320 LF 2407作为中央处理器的无刷直流电动机控制器,并将该控制器应用于混合动力汽车的驱动系统中。
A design of hybrid electric vehicle (HEV) brushless DC motor controller based on TMS320LF2407 with energy regeneration, which is used in the drive system of the HEV.
直流无刷电动机不仅保持了传统直流电动机良好的动、静态调速特性,且结构简单、运行可靠、易于控制。
BLDC is simple in structure, reliable in operation and easy to control when it remains the good dynamic and static governing characteristics of the traditional DC Motors.
讨论了无刷直流力矩电动机系统参数对整个控制系统的影响。
The effect on the control system caused by the parameters of the BLDC torque motor is discussed.
应用推荐