首先,导出了用极坐标系描述的中厚板自由振动板的微分方程,用分离变量法求得其一般解。
Firstly, the expressions of free vibration of moderately thick plates in polar coordinates are derived and the general solutions are obtained by the means of method of separation of variables.
基于有限元直接法计算振动板的频率响应,以板局部厚度为设计变量,计算了振动速度对局部板厚度的灵敏度;
Its frequency response is calculated by use of FEM and its vibration velocity sensitivity with respect to its local thickness as a design variable is computed.
以工程常见四端位移为零的振动板为例,提出一种新的压电式传感器的设计方法测量第一阶声辐射模态伴随系数。
With the examples of the pinned-pinned plate, a new piezoelectric sensor design is presented to measure the first adjoint coefficient of radiation mode.
藏伯格称,常规地震仪采用电路板记录重物受地震波影响的振动情况。
Zumberge said a conventional seismometer records how its mass is displaced by these waves of seismic energy with electric circuit boards.
采用解析的方法研究了上覆单相弹性层的饱和地基上刚性圆板的摇摆振动。
Rocking vibration of rigid disk resting on saturated medium with an elastic superstratum are studied by analytical methods.
采用解析的方法研究了上覆单相弹性层的饱和地基上刚性圆板的扭转振动。
Torsional vibrations of a rigid disk resting on saturated medium with an elastic superstratum are studied by analytical methods.
实验结果表明,所设计的控制方案具有机动速度快、超调小,在机动过程中能抑制挠性板振动等优点。
The experimental results show that the control strategy has small overshoot and fast slew maneuver with simultaneous vibration suppression.
本文给出了复杂边界条件下任意形状板的自由振动分析的一个新的解析解法。
This paper gives a new analytical solution of the free vibration of an arbitrary-shaped plate with complex boundary conditions.
用积分变换和积分方程研究多孔饱和半空间上刚性圆板的垂直振动问题。
The vertical vibration of a rigld circular plate on a poroelastic half space is studied by using the technique of integral transform and integral equation.
通过算例研究和讨论了粘弹性边界支承对板的振动响应的影响。
Effects of the viscoelastic boundary supports on the vibration response of the vibrating plate are discussed by an example.
应用一般解析解来求解具有中间支承矩形板的自由振动问题。
A general analytical solution is used to solve vibration problems of rectangular plates with intermediate support, here.
然后由叠加原理将环扇形板的自由振动问题转化为积分方程特征值问题;
Then the eigenvalue problem of free vibration of annular sector plates is transformed into the eigenvalue problem of integral equation by using superposition theorem.
作为具体问题,采用多尺度法求出了横向磁场中条形板非线性振动的近似解析解。
As an example, an approximate analytic solution of nonlinear vibration for a plate strip in lateral magnetic field is obtained by the multi-scale method.
可用来求解任意边界矩形板的振动问题。
It can be used to solve free vibration problem of rectangular plates with arbitrary boundaries.
研究了非线性地基上正交异性矩形板的非线性固有热振动。
The nonlinear natural thermal vibration of a rectangular orthotropic plate on a nonlinear foundation was studied.
引入冗余照明的概念,以实现波带板的空间相干照明以及降低束线对光源不稳定性及元件振动的要求。
The concept of redundant illumination is introduced to ensure the coherent illumination of zone plate and reduce the effect of source instability and element vibration.
对简支各向异性平行四边形板在面内张力和剪力作用下自由振动、屈曲和弯曲问题作了全面的研究。
A comprehensive study of free vibration, buckling and bending of anisotropic simply-supported skew plates subjected to in-plane normal and shear forces is conducted.
对水下由环形肋板连接的有限长双层柱壳在点激励下的稳态振动特性进行了研究。
The characteristics of vibration in a submerged double shell connected by annular plate drived by a point force in inner shell is studied.
为了解超声清洗等应用中常用超声换能器激励的板声源的振动特性,使用有限元方法对其进行了研究,并通过实验验证了仿真结果。
In this paper, vibration characteristics of plate sound source driven by transducer commonly used in ultrasonic cleaning are analyzed with the finite element method.
基于作者提出的饱和土弹性波动方程,研究了饱和地基上含刚核弹性圆板在竖向集中谐和力作用下的振动特性。
A study of the vertical vibration of a flexible plate with rigid core resting on saturated ground is presented in this paper.
建立了阶梯式变厚度圆板横向自由振动的微分方程,得出其初参数解。
A differentinal equation of transverse free vibration is established for circular plates with stepped variable thickness, and the initial parameter solution of this equation is obtained.
求解了厚圆板在周边固支和简支条件下的对称与反对称的自由振动问题。
The symmetric and unti -symmetric free vibration problems of thick plate with the fixed and simple support edge conditions are solved.
从而可用重三角级数解带有自由边的矩形板的弯曲、稳定和自由振动问题。
Therefore it becomes possible to use double Fourier Series to solve the problems of bending, buckling and free vibration of rectangular plates with free edges.
本文利用拟板法对正交正放类、两向斜放类和三向类网架的动力问题进行了研究,导出了一般的振动控制方程。
In this paper, the dynamic problems of three kinds of space trusses are studied and the general vibration equations are derived by the plate analogy method.
考察了沿厚度方向材料参数为非均匀的功能梯度横观各向同性矩形板的自由振动。
The free vibration of a transversely isotropic and functionally graded rectangular plate with material constanting inhomogeneous across thickness is investigated in the paper.
把本文第一部分建立的方法用于求解各向异性板的弯曲问题和振动问题。
The methodology presented in Part I is employed to deal with flexure and free vibration of anisotropic plates.
研究了基于振动特性的点阵桁架夹心板损伤识别。
A numerical study for vibration based lattice truss structural damage identification was presented.
用高精度三角形板单元有限元程序研究多种正交各向异性材料开圆孔或开方扎夹支方板的自由振动。
The free vibration of orthotropic clamped square plates with a circular or square hole is studied with the help of the program using the high-precision triangular plate bending element.
为检验仪表板总成的振动特性,参考仪表板总成的模态试验要求,计算仪表板总成的约束-自由模态;
To check up the IP's vibration property, the IP's constrained-free mode is calculated referring to the modal testing requirement of the IP.
为检验仪表板总成的振动特性,参考仪表板总成的模态试验要求,计算仪表板总成的约束-自由模态;
To check up the IP's vibration property, the IP's constrained-free mode is calculated referring to the modal testing requirement of the IP.
应用推荐