单向器，传动轴，冷挤压件，摇窗电机。
Starter Drive, Transmission Shaft, Cold Forging Parts, Lift Motor.
除了拉伸性能，还对挤压件进行机械加工性能的评价。
In addition to the tensile properties, machinability was evaluated for the extrusions.
分析了亚共晶高铬铸铁半固态浆料进行流变挤压成形后挤压件的力学性能。
The mechanical property of the hypoeutectic high chromium cast iron extrusion samples was analyzed after extruded by semi-solid rheocasting forming.
采用上述工艺参数对浆料进行半固态挤压成形，并对挤压件进行冲击韧性、硬度和冲击磨料磨损测试。
Use these technical parameters, carry the semisolid extrusion shaping to the slurry, then test the impact ductility, rigidity and impacting grinding abrasion.
通过模拟分析工艺的合理性以及成形过程中可能产生的缺陷，从而改进模具，以成形更为合理的挤压件。
Through analyzing the rationality of the process and the possible defects in forming process, the die was improved, the qualified extrusion parts were gained.
挤压速度、挤压毛坯的温度、型腔温度、模具的表面粗糙度以及挤压毛坯的化学成分是影响热挤压件表面质量的主要因素。
Extruding velocity, temperature of billet and container, die roughness and the chemical composition of the billet are the major factors which affect the surface quality of the extruded product.
然后我们取出绞肉机的刀片，再安上一种挤压零件。
Then we remove the blade from the mincing machine and install an extrusion attachment.
如果说我必须为一件挤压我男性私人部位的不舒服的衣服付款，而且穿着它四周走上几个小时，我想我一定会被气死的。
If I had to pay for an uncomfortable device that compressed my male parts, and then walk around in it for several hours, I would be pissed off.
在挤压机各零部件的强度计算中，可通过对挤压筒几个主要设计参数的修订，来完成其复杂的计算。
The complicated strength computation of its spare parts can be completed by amending the main parameters of squeeze tube.
本文就双杯形件挤压成形工艺进行了研究。
The paper makes some studies on extrusion forming technology of two-cup part.
研究了半固态等温温度、搅拌速率和挤压力对成型件质量的影响。
The influence of the isothermal temperature, the stirring speed and the extrusion pressure on quality of the formed parts were investigated.
粉末锻造零件通常不像冷挤压和烧结零件那样接近最终尺寸或形状。
Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.
对较大公差的零件，烧结后可放回模具重新挤压。一般而言这会使零件更精确同时具有更好的表面光洁度。
For high tolerance parts, a sintering part is put back into a die and repressed. In genera this makes the part more accurate with a better surface finish.
冷挤压能保证被压制或“未加工”的零件尺寸十分精确，因为它被精确地按模具的尺寸和形状成型。
Cold compaction ensures that the as-compacted, or "green", component is dimensionally very accurate, as it is moulded precisely to the size and shape of the die.
腔体是连续挤压机的主要零件之一，在工作过程中产生复杂的温度环境。
Chamber is one of the main parts of continuous extrusion machine, which produces complicated temperature environment in working process.
介绍了汽车变速箱中的一个关键零部件—双联主动齿轮的冷态镦粗、挤压及冲孔的复合成型工艺。
This paper introduces cold heading and combined forming process of extrusion and punching for gear cluster, a key part of automotive gearbox.
本文论述了锥台形空心件挤压成形工艺和模具设计要点，给出了实用的模具结构。
A dissertation is made on the process and main points of the die design for extruding the hollow parts of the frustum type.
挤压后的零件不易脱模是多台阶空心零件在挤压成形工艺中的难点。
The forming of hollow steps shaped part by the extrusion forming process is a difficult problem.
本文介绍的将模式性知识引入到冷挤压工艺设计过程中，对零件进行特征编码完成信息转换的方法可以有效地解决这个问题。
This paper introduces the method that applies the code knowledge into cold extrusion process planning and transforms the information into feature code for the parts.
针对带孔深锥形管件的成形特点进行了工艺分析，确定了成形方案，设计了锥形管挤压模和冲孔模。
The extrusion and piercing die was developed based on the technical analysis on the shaping characteristics of deep taper pipe with hole.
对镁合金管件挤压成形工艺进行了实验研究，确定了其成形工艺参数。
The forming process of magnesium alloy extrusion tubes was researched, the forming parameters were determined.
对一种底部带凸缘的深杯形件的正、反挤压工艺分别进行了试验研究。
The test and study respectively on the forward and backward extruding technology for deep-cup-typed component with flange on base were conducted.
叙述了采用冷挤压工艺代替切削加工生产齿轮轴的优点，并对齿轮轴零件进行了工艺分析。
The advantage of the gear axis with cold extrusion technology replacing metal cutting working production are narrated, and the technological analysis for the gear axis part is conducted.
从而为确定类似空心零件挤压生产工艺参数提供了一种简便而行之有效的方法。
As a result, a feasible simple method to determine the param-ete of extrusion with the similar hollow part is provided.
并导出了平底及锥形凹模内正挤空心件时单位挤压力的计算公式。
The formulas of extrusion for hollow parts in the square dies and the conical dies has been derived.
介绍了用于汽车零件冷挤压的任意层、不同材料组合模的统一计算模型。
This paper presents an unified computer model for calculating the com - bined dies for automotive cold extrusion parts with different materials and structure.
结合非对称锥形壳体零件，研究了镁合金材料MB2的热挤压成形工艺。
The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.
结合非对称锥形壳体零件，研究了镁合金材料MB2的热挤压成形工艺。
The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.
应用推荐