传动轴需采取合适的挠性连接方式。
Transmitting shaft must be connected with suitable flexible coupling.
挠性管作业机的主要设备部件之一。
One of the principal equipment components of a coiled tubing unit.
关于挠性管柱和相关设备的通用术语。
A generic term relating to the use of a coiled tubing string and associated equipment.
首先介绍了挠性陀螺力反馈回路的传递模型。
This article first presents the Dynamically Tuned Gyro(DTG) force feedback loop transfer model.
使用两只剑杆时,剑杆可以是刚性的,也可以是挠性的。
In the later case, the rapiers may be either rigid or flexible.
最后深入分析了在该方案下太阳帆板挠性模态的稳定性。
Finally, the stability of solar sail flexible modes is analyzed in depth.
本文叙述了挠性转子动平衡与刚性转子动平衡的不同特点。
This paper deals with the different characteristics of the flexible and the rigid rotor balancing.
本文提出利用模态参数识别技术进行挠性转子动平衡的方法。
The present paper offers a method of balancing dynamically the flexible rotors with the technique of modal parameter identification.
此外,文中还提出了改进挠性轴陀螺转子动平衡的一些建议。
Furthermore some Suggestions for improving the balancing of a flexible gyrorotor are presented.
当挠性管柱在卷筒与注入头之间经过时施加在挠性管上的拉力。
The tension applied to a coiled tubing string as it passes between the reel and the injector head.
螺杆钻具挠性轴设计中的两个主要问题是强度校核和干涉量计算。
The main Problems with designing the flexible shaft on a screw drill are strength check and interference calculation.
随着挠性附件的数目的不同,卫星系统的拓扑构型也将有所不同。
Such a system will have different topological configurations if the quantity of flexible appendages is different.
提出了一种新的加权极点配置方法来设计挠性系统的鲁棒控制器。
A new weighted pole-placement method is proposed to design a robust controller for the flexible system.
缓冲层资源可能是昂贵的抗震建筑材料,其抗震挠性每个世纪只用得上一两分钟。
The buffer may encompass expensive building materials whose earthquake flexibility is needed only for a minute or two every century.
将基于滑模控制的自学习模糊控制应用于挠性卫星的姿态稳定控制中。
The self-learning fuzzy control based on sliding mode control is applied to the attitude stabilization of flexible satellites.
挠性电路还非常便于携带,它非常有弹性,可以像衣服或项链一样戴在身上。
Flexible circuits would also make portable devices more resilient; they could be worn like clothing or jewellery rather than carried.
当液压传动系统使链转动时,夹块将挠性管柱送入井内或将它从井内带出。
As the hydraulic drive system rotates the chains, the gripper blocks feed the tubing string into, or out of the well.
具有耐燃、耐腐蚀、耐水、耐老化、挠性良好、结构牢固、工作可靠等优点。
Possessing the advantages of fire retardancy , corrosion proofing , antiaging , flexibility , firm structure and reliable work , etc.
介绍了全姿态挠性陀螺找北仪系统中数据采集计算模块的软、硬件设计与实现。
This paper introduces the design and realization of the data acquisition and calculation module in all position flexible gyro north-finder.
从电子产品的发展趋势入手,分析了在未来几年挠性印制电路的技术市场需求。
Through the development tendency of the electronic production, analysing the technique marketplace demand of the flexible printed circuit in the future.
通过对计算结果的分析,找出挠性轴设计中存在的问题,并提出相应改进意见。
By analyzing the calculation result, the problem existed in the design of flexible shaft was found out and corresponding improvement measure was put forward.
这是确定挠性管柱工作范围的重要因素,因为挠性管的缠绕趋向于产生某个椭圆度。
This is an important factor in determining the operating limits of coiled tubing strings since the action of spooling the string tends to induce some ovality.
建立了非对称弹丸在挠性渐速膛线身管内的弹丸一般运动动力学模型和运动微分方程组。
A general dynamic model and differential equations for an unsymmetrical projectile traveling in a flexible, increasing twist rifled bore gun tube are developed.
另外,密集模态挠性结构模型容易受到环境和结构参数变化的影响,导致控制器的失效。
In addition, flexible structures with close modes can be easily influenced by the environment and changes of structures parameters, which may disable the controller.
防爆挠性管具有耐燃、耐腐蚀、耐水、耐老化、挠性良好、结构牢固、工作可靠等优点。
Explosion proof flexible tube flame resistance, corrosion resistance, water resistance, ageing resistance, good flexible, firm structure, reliable operation, etc.
利用这种方法,本文对动力调谐式陀螺和挠性加速度计的随机漂移过程进行了建模研究。
By using this method, the mathematical models have been established for random drift process of the dynamically tuned gyro and the flex-accelerometer.
采用裂纹深度修正的非线性开闭裂纹模型,研究涡动影响下挠性裂纹转子的动力学行为。
A nonlinear crack modal, modified by the crack depth, is used to study a cracked rotor with the influences of whirl speed.
采用裂纹深度修正的非线性开闭裂纹模型,研究涡动影响下挠性裂纹转子的动力学行为。
A nonlinear crack modal, modified by the crack depth, is used to study a cracked rotor with the influences of whirl speed.
应用推荐