当一个扰流片扬起的时候，另一边的机翼就会下降。
着重探讨了来流攻角和扰流片高度对过冲量的影响。
As a primary purpose, the effect of Angle of attack and height of spoiler on the unsteady flows are investigated.
它不只是一个扰流警报，但是你用了41年来看这个电影。
This is more of a spoiler alert, but you've had 41 years to see this movie.
本文详细介绍了扰流子空气预热器强化传热过程的原理。
The strengthening heat transfer principle of disturbing flowing air preheater has been described.
所述内管是光管、螺纹管、内肋管或带有扰流片的管子。
The inner tube is a light tube, a screw tube, an inner rib tube or a tube with a spoiler.
本课程介绍地球海洋和大气层中扰流的现象、理论和模型。
This course presents the phenomena, theory, and modeling of turbulence in the Earth's oceans and atmosphere.
本文介绍用涡面元法模拟带扰流片的翼型低速无粘分离绕流。
A vortex panel method is presented to simulate low speed inviscid separated flow past an airfoil with a spoiler.
设计一种结构简单、没有专门扰流装置的被动式微螺旋混合器。
Is designed a simple structure passive micro-screw mixer without the exclusive turbulence device.
当两边的扰流片都扬起时，升力就会下降，阻力增加，飞机下降。
When both are raised, overall lift fall and drag increases, so the aircraft descends.
副翼比旧式喷气机上的要小，装载机翼顶部的扰流片可以辅助副翼。
Ailerons are smaller than on the older jets, and they are aided by spoilers mounted on the tops of the wing.
扰流柱柱高的改变对流场影响较大，而且对换热也带来明显的影响。
The variation of the height of the channel has effects on the fluid flow, and leads to different heat transfer coefficient distributions.
对近几年来光管扰流子空气预热器在石化行业的应用情况进行了总结。
Application of air heater of vortex tube in petrochemical engineering industry has been summarized recently.
水滴形扰流柱是一种具有综合性能、替代常规圆形扰流柱的理想结构。
So that the water drop-shaped column array is a promising configuration with a comprehensive properties and can replace the normal circle-shaped column.
对一个有交叉排列圆形扰流柱的涡轮叶片尾缘冷却方案进行了数值研究。
The numerical study was carried out on the trailing edge cooling of turbine blade using the circular pin fin that was arranged in cross type.
与扰流振幅相比，调节扰流振荡频率更能改善翼型深失速条件下的气动性能。
The frequency of oscillating excitation has more effect on improving aerodynamic performance of airfoil at large attack…
外型设计方面，两款型号都配备外型修改配置，包括头唇、后扰流器及尾翼。
On the design front, both models have a revised styling package with a front lip spoiler, a rear diffuser and a trunk-mounted spoiler.
对约翰逊公司扰流棒的特点、工作原理、安装步骤、安装要求及使用效果进行了介绍。
Introduction is made to the properties, working principles and practical effects of the tabulator bars of the Johnson Corporatin (Wuxi) Technology Co.
结果表明，采用当量椭圆简化矩形翅片使肋效率偏高，增加扰流孔则导致肋效率下降。
It shows that the calculation by applying equivalent ellipse will produce a value of fin efficiency on the high side and the fin efficiency decreases with the increase of disturbing flow holes.
本文在对絮凝理论分析的基础上，设计了几种不同扰流形式的旋流-扰流絮凝反应器。
The present paper aims to introduce a new-style rotational disturbed flow reactor developed by the author and the technology involved with the given reactor.
本文对具有断裂结构扰流柱的涡轮叶片尾缘楔型通道的流动与换热过程进行了实验研究。
The heat transfer and characteristics of the fluid flow in the duct of the trailing edge of the turbine blade with parted pin-fin arrays were experimentally investigated.
从非定常流场计算出发系统的研究了嗡鸣发生的机理以及扰流片对嗡鸣起抑制作用的机理；
Through solving the unsteady flow fields of an airfoil-flap, the mechanism of buzz is intensively studied.
建桥后由于桥墩扰流，改变了原有的水流条件与河床冲淤条件，从而影响到原有的通航条件。
Due to the disturbed flow at bridge pier, the original condition of flow and bed scouring and sedimentation was changed, and thus the navigation condition was affected.
在风洞用电子扫描阀进行测压 ，研究了绕平板扰流片和锯齿扰流片分离流动的壁面压力分布 。
Wall pressure distribution induced by the saw-tooth flap has been investigated with electronic pressure scanner in wind tunnel.
本发明是一种保证将扰流棒固定在蒸汽加热烘缸内表面的方法和装置，特别是在造纸机械的烘缸中。
The invention relates to a method and a device for fixing turbulence bars in a steam heated drying cylinder, particularly in a drying cylinder of a paper making machine.
实验结果表明，层板内部的流动情况随其结构的变化而变化，这种变化主要集中在扰流柱附近区域。
The result shows that the flow inside the lamilloy varied when the structure is different from one to another, and the changes are mainly close-by the area of pin-fin.
一个超级功能的碳纤维前扰流板，不锈钢排气系统，一个新的后扰流器，及伪造的RS - 1轮。
The Supersport features a carbon fiber front spoiler, a stainless steel exhaust system, a new rear diffuser, and forged RS-1 wheels.
对滴形扰流柱对透平机械尾部换热及阻力的影响进行了实验研究，讨论了柱体形状及排列方式的影响。
It has been experimentally investigated the effects of drop-shaped pin fins on heat transfer and pressure loss for the blade trailing of turbomachinery.
本文用实验的方法模拟研究了涡轮叶片尾缘出流对带叉排扰流柱阵列的内冷通道的对流换热特性的影响。
An experimental research was conducted to simulate the effect of trailing edge ejection of turbine blades on heat transfer of the inner cooling passage with staggered pin fin array.
本文用实验的方法模拟研究了涡轮叶片尾缘出流对带叉排扰流柱阵列的内冷通道的对流换热特性的影响。
An experimental research was conducted to simulate the effect of trailing edge ejection of turbine blades on heat transfer of the inner cooling passage with staggered pin fin array.
应用推荐