• 托槽的黏接是正畸治疗程序中非常关键的一环,而托槽的黏接强度又受到多种因素的影响。

    The bonding of orthodontic brackets is very important in the procedure of orthodontics, and the bond strength is affected by lots of factors.

    youdao

  • 带方丝弓托槽的正畸示范模型。

    Orthodontic model for demonstration With Edgewise Orthodontic bracket.

    youdao

  • 展示了牙齿矫治后的效果。使用的是普通托槽。

    Shows the effect after dental treatment. Using Ordinary brackets.

    youdao

  • 迷你型的金属托槽的强度显著低于标准型托槽;

    The degree of strength of mini metal bracket was significantly lower than that of the standard edgewise bracket.

    youdao

  • 结论这种彩色弓丝和托槽具有良好的细胞相容性。

    Conclusion The colored orthodontic wire and bracket had good biocompatibility.

    youdao

  • 当氟化钠浓度高于3%后,托槽的抗剪粘接强度下降。

    The shear bond strength decreased while the concentration of NaF was higher than 3%.

    youdao

  • 本发明公开了一种牙齿正畸自锁托槽,属于牙齿正畸设备技术领域。

    The invention discloses a tooth orthodontics self-locking bracket belonging to the technical field of tooth orthodontics device.

    youdao

  • 目的观察不同种类的底板结构及黏接剂对金属托槽粘接强度的影响。

    Objective The purpose of this study was to investigate the influence of different base designs and adhesives on the bond strength of metallic orthodontic bracket.

    youdao

  • 目的评价树脂改良型玻璃离子粘固剂粘接正畸托槽的临床使用效果。

    Objective To evaluate the resin modified glass ionomer cement (RMGIC) for orthodontic bracket bonding.

    youdao

  • 舌侧托槽是依牙齿舌面的解剖结构及每个牙齿的舌侧形态特征而设计。

    The design of lingual bracket is based on the special anatomy structure of lingual face of every tooth and its morphological characteristics.

    youdao

  • 本发明公开了一种制造正畸托槽的方法,属于正畸托槽制造技术领域。

    The invention discloses a method for manufacturing orthodontic brackets and belongs to the technical field of orthodontic bracket manufacturing.

    youdao

  • 目的:研究三种不同釉质粘接剂对陶瓷托槽与瓷修复体粘接剪切强度的影响。

    Objective: to investigate the shear bond strength of three adhesive systems bonded with ceramic brackets to the porcelain surfaces.

    youdao

  • 因此,正畸托槽与复合树脂修复体的直接黏结成为临床医师普遍关注的问题。

    Therefore, the direct bonding between the orthodontic bracket and resin composite becomes a universal focus in orthodontic clinicians.

    youdao

  • 结论:托槽粘接后,托槽周边区域及龈方近牙颈部区域是菌斑聚集的主要区域。

    Conclusion: After brackets bonding, regions that around and gingival to the bracket base are critical sites for plaque accumulation.

    youdao

  • 托槽垂直向移位可引起既定转矩值的改变,尖牙托槽底板弧度应有近远中之分。

    The vertical shifts of brackets could change the preadjusted torque value and the design of cuspid bracket should have the distinction between mesial and distal shape.

    youdao

  • 摘要正畸托槽的精确定位和足够的粘结强度,是正畸治疗获得成功的必要条件。

    Abstract: Accurate position and adequate bond strength of orthodontic brackets are necessary conditions for the success of orthodontic treatment.

    youdao

  • 方法根据个别牙齿错牙合畸形不同,在矫治过程中将两种矫治器托槽交互替换使用。

    Methods According to the difference of malocclusion deformity of some teeth, two kinds of corrective brackets were used in turn.

    youdao

  • 本文旨在探讨应用人工排牙法制作无托槽隐形矫治器治疗轻度牙列拥挤的临床效果。

    This article is to investigate the clinical effect of mild dental crowding cases applying bracketless invisible appliance by manual tooth arrangement.

    youdao

  • 摘要目的 研究纳米级二氧化钛对正畸托槽粘接剂抗菌效果及拉伸粘接强度的影响。

    Abstract : Objective To evaluate the effect of titanium dioxide (TiO2) nanoparticles on tensile bonding strength (TBS) and antibacterial properties of an orthodontic adhesive.

    youdao

  • 展示了牙齿拥挤、反颌、前突、开颌等异常情况和矫治的方法。 使用的是普通托槽。

    Shows the crowded teeth, anti-jaw, protrusion, jaw opening and other anomalies and treatment methods.

    youdao

  • 经短期人工龋后,用偏振光显微镜观察托槽周围釉质脱矿病损的分布并测量病损体部深度。

    After the artificial caries attack, the enamel lesions of demineralization was observed by polarized light microscope, and the depth of lesion was measured.

    youdao

  • 结论:使用直丝弓矫治技术时,应重视托槽表面粗糙、磨损对摩擦力的影响,注意支抗控制。

    Conclusion: the attention would be played to the influence of the roughness and abrasion of the bracket slot area on friction and anchorage control in using sliding mechanics.

    youdao

  • 目的研究瓷表面不同处理方法对金属托槽与瓷修复体的粘接强度及去粘接后瓷面完整性的影响。

    Objective to investigate the influence of different porcelain surface treatment methods on the shear bond strength of metal brackets bonded to porcelain.

    youdao

  • 丁宏,吴建勇。不同偶联剂和粘接剂对烤瓷瓷面与金属托槽抗剪切强度影响的体外研究[J]。

    DING Hong, WU Jian-Yong. The vitro study of the influence of different silane coupling agents and adhesive materials on shear bond strength of metal brackets to porcelain surface [J].

    youdao

  • 摘要[摘要]目的研究不同类型硅烷偶联剂和粘接剂对烤瓷瓷面与金属托槽之间抗剪切强度的影响。

    Abstract: Objective: to investigate the influence of different silane coupling agents and different adhesive materials to the shear bond strength of metal brackets bonded to porcelain surface.

    youdao

  • 采用一种自制的非调和型正畸粘接剂,考察了牙釉质与正畸托槽在五种实验条件下的粘接抗张强度。

    The tensile bond strength between enamel and orthodontic bracket mediated by a mo-mix orthodontic adhesive fabricated in this department was tested in case of five experimental conditions.

    youdao

  • 探讨在干燥条件下,在牙齿排齐整平阶段应用不同的自锁托槽与不同的镍钛圆丝组合所产生的滑动阻力。

    To compare the level of friction resistance (fr) of different design self-ligating brackets using various bracket-wire combination in dry state during orthodontic phase of leveling and aligning.

    youdao

  • 探讨在干燥条件下,在牙齿排齐整平阶段应用不同的自锁托槽与不同的镍钛圆丝组合所产生的滑动阻力。

    To compare the level of friction resistance (fr) of different design self-ligating brackets using various bracket-wire combination in dry state during orthodontic phase of leveling and aligning.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定