在成套泵筒感应热处理设备中,淬火机床对满足性能要求起着关键作用。
During induction heat treating of pump tube, quenching machine tool plays a key role to fulfill the required properties.
确定后的工艺已成功应用于长江三峡大坝及电站主轨的表面感应热处理。
This process has been successfully used in induction hardening main-rails of Sanxia Dam and hydraulic power station.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
连续感应热处理过程存在着强电磁场干扰、非线性、强噪声和过程参数多变性,传统的控制方法难以奏效。
In process of continuous induction heat treatment, there are heavy electromagnetic disturbance, nonlinearity. heavy noise and variable parameters. The existed methods of control are difficult.
本文摘自作者关于电磁感应热处理的新书,全面地概述了齿轮淬火,包括零件的材料选取、硬度模式、线圈设计和加热方式等。
Extracted from the authors' new book on induction heating, this comprehensive overview of gear hardening includes sections on material selection, hardness patterns, coil design and heating modes.
火焰淬火和感应淬火是经常在大型齿轮上使用的热处理方法。
Flame hardening and induction hardening are the methods usually used to harden larger gears.
自从感应加热电源问世以来,由于其在工业热处理等方面的各种优点,迅速地应用到了国民生产的各个领域。
Since the invention of the induction heating power supply, it has been rapidly applied to the every area of national production for its advantages in the industrial heat treatment.
对厚壁管感应加热设备及热处理工艺进行了重新设计改造。
The induction heating equipment and heat treatment process of thick-wall pipe were reconstructed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
特殊的材料包括球墨铸铁和钢煅品,大部分机轴经过热处理,表面硬化、渗氮和感应淬火。
Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
在分析这些事故的基础上,讨论感应加热中几个主要工艺参数,以进一步提高感应加热处理零件的质量。
On the basis of analysing the failure main technological parameters in induction heating are discussed in order to further improve the quality of induction-heat treatment parts.
本文针对抽油杆的连续感应中频热处理过程,介绍了以PC总线工控计算机为核心的智能控制系统。
In this paper, PC-bus industrial computer being as a kernel, the intelligent control system is demonstrated for continuous induction heat treatment of extraction oil bar.
为此,设计制造了特殊的感应器和工装夹具,采用二次高频淬火工艺解决了该倒挡拨叉的热处理难题。
For this reason, special inductor and fixture have been designed and the heat treatment problem of the reverse fork has been successfully solved by double high frequency quenching.
公司主要从事零件及模具热处理、调质处理、渗碳、氮化、高频感应处理等业务。
Companies engaged mainly in parts and die heat treatment, conditioning treatment, carburizing, nitrogen, high-frequency sensors, such as processing business.
中兴电气有限公司是专业生产感应加热设备的高科技企业、中国热处理协会会员。
Henan Zhongxing Electric Co., Ltd. is specialized in producing induction heating equipment, high-tech enterprise, China heat Treatment Association.
分析了预制碎片弹弹体在热处理过程中采用的感应淬火工艺。
The author analysis and discusses induction quenching process used in the process of the thermal treatment for the prefabricate fragment projectile body.
研究了轧辊的预备热处理工艺对感应加热淬火组织的影响,感应加热温度和时间对组织和硬度的影响。
The effect of preheating treatment process of cold rolls on induction heat quenched structures and the effect of heating temperature and time on structure and hardness have been studied.
阐述了一种新型钟罩式多炉膛感应加热炉的结构和工作原理,介绍了它在金属零件热处理中的应用。
The structure and operating principle for two kinds of new type removable bell type induction heating furnace have been described.
经高温热处理纤维的磁感应强度明显提高。
Magnetization of the fibers increased passed disposal of high temperature in crease obviously.
阐述了一种新型钟罩式多炉膛感应加热炉的结构和工作原理,介绍了它在金属零件热处理中的应用。
The structure and principle of a new type of the multiple induction furnace heater with bell jar type was introduced. Its application in heat treatment of the metal parts was also introduced.
美式结构,刀头优质碳钢锻压,整体热处理,刃口高频感应淬火,刀片上偏心螺栓调节间隙,剪切硬度HRC30。
American type, drop-forged blades with high quality carbon steel, body heat treatment, cutting edges induction quenched, easy adjustment, cutting abilityHRC30.
通过电感应加热(如有必要)在炉内进行热处理。
C. 4.2this heat treatment shall be carried out in a furnace or if required by electric induction heating.
通过电感应加热(如有必要)在炉内进行热处理。
C. 4.2this heat treatment shall be carried out in a furnace or if required by electric induction heating.
应用推荐