对波浪载荷进行准确的预报是船舶与海洋工程结构设计与强度评估的基础和关键。
The accurate prediction of wave loads is a key factor of design and strength evaluation for ocean engineering structures.
预测结果与实际使用寿命取得一致，为动臂疲劳强度评估及结构改进提供了依据。
The result is identical with practical life, which can be used for the working arm fatigue strength assessment and the improvement of structure.
分析结果表明，采用此有限元方法可为机体的强度评估和多方案改进设计提供依据。
The results show that the FEM offers the basis for the strength evaluation of cylinder block and design improvement of many schemes.
本文综述了自升式平台强度评估的技术进展和现状，提出强度分析的计算分析方法。
This paper reviews the present situation and progress of strength evaluation, and puts forward analysis method of structure.
研究表明，ECCS规范方法用于车辆焊接转向架承载构件的疲劳强度评估是可行的。
The study shows that it is feasible to apply ECCS Recommendation Method to the evaluation and estimation of the fatigue strength of the load carrying parts on welded bogies.
本文根据《共同规范》关于屈曲强度的技术要求，详细地阐述了油船结构屈曲强度评估的基本方法和分析步骤。
The paper describes basic methods and analytical approach of buckling strength assessment of oil tank structure in detail, basing on technical specifications of buckling strength in "Common Rules".
接下来的研究会致力于改进儿童骨骼强度评估的最佳方式并对会影响骨折风险的、不依赖于骨骼本身的临床变量进行测定。
Ongoing research will serve to refine the best modalities for assessing the bone strength of children and to determine the key clinical variables that influence fracture risk independent of bone.
本文依据JTP中关于舱段有限元建模的要求，采用有限元软件ANSYS的APDL语言，建立了超大型油船三舱段结构强度评估平台。
A stress evaluation platform for the oil crude tanker with three cargos is built based on the JTP rules by using the APDL language of ANSYS.
这样做是为了评估标志着假日购物季节开始的这一天的消费需求的强度。
The idea is to assess the strength of consumer demand on the day that marks the start of the holiday shopping season.
疲劳强度分析、疲劳寿命预报和疲劳行为的评估具有重要的工程背景和理论研究价值。
Fatigue strength analyses, prediction of fatigue life and assessment about fatigue behaviors have important engineering background and particular theoretic value.
可靠性评估方法是基于应力—强度模型的串联法。
The series method of stress strength model is used to evaluate structural reliability.
最后，基于极限强度，将该组合方法用于评估散货船在极值弯矩作用下的船体梁安全性。
Then, the compound method is used to assess the hull girder ultimate strength reliability of a bulk carrier subjected to extreme bending moments.
MRI使用2- 4数字评分评估包括椎间盘信号强度降低，椎间盘向后突出，椎间隙狭窄，以及椎间孔狭窄。
Evaluation of MRI included decrease in signal intensity of discs, posterior disc protrusion, disc space narrowing, and foraminal stenosis using 2 to 4 numerical grades.
本文研究了焊接结构疲劳强度的热点应力评估方法。
In this paper, the hot spot stress evaluation method is studied for evaluating the fatigue strength of welded structure.
为了使浮桥的设计既安全又经济，就必须对浮桥的载荷和强度有一个比较精确的评估。
To keep the design of floating Bridges safe and economical, a relatively precise evaluation on the Bridges' loading capacity and strength is necessary.
采用可靠性评估的方法，对船体总纵强度的安全水平可作出合理的评价。
Using reliability assessment method, we can obtain proper assessment of hull longitudinal strength safety level.
该方法引入了框架结构层间屈服强度系数的概念，更适宜于框架结构震后的整体损伤评估。
In this method, the concept of frame structural yield strength coefficient is introduced, so it is more applicable for assessing structural injury.
针对腐蚀和疲劳裂纹对船体强度的影响，提出一种结构可靠性的评估方法。
A method for reliability assessment of the strength of a degraded ship hull in the presence of corrosion and fatigue is developed.
确认胸1、2椎板的解剖尺寸，评估椎弓根螺钉和椎板固定螺钉的骨螺钉界面的生物强度。
Objective. Define the T1 and T2 anatomic lamina size and evaluate the bone-screw interface strength of various pedicle screw options and intralamina techniques.
建议采用新的统计方法评估钢中夹杂尺寸、分布及其对疲劳强度的影响。
It is recommended that new statistical methods should be used to evaluate the size, distribution of inclusions and its effect on the fatigue strength of the steel.
重组最大信号强度投影(MIP)图像后，原始单层图像和mip图像均用于图像质量的评估。
For image quality evaluation, MR maximum intensity projection (MIP) images were created. Both original single slices and MIP images were used for image quality evaluation.
本文研究了对三维模型的导管架平台结构系统静强度可靠性评估方法。
This paper studies the evaluation method of static strength reliability on 3-dimensional model for off-shore platform structure system.
刺激控制装置可包括一范围内的低和高强度刺激，以刺激并评估神经和肌肉两者。
A stimulation control device may incorporate a range of low and high intensity stimulation to provide a stimulation and evaluation of both nerves and muscles.
然后分别对车身骨架进行了弯曲和扭转工况下静态分析，初步评估车身结构静强度危险位置。
Then the article conducts static analysis of the body frame under bending and torsion condition, so that preliminary to assess the risk static strength location of the body structure.
在设计汽车骨架等薄壁点焊结构时，必须对薄壁构件焊点的疲劳强度进行精确评估。
In the design of thin-walled spot welding structures such as the automobile body structure, it is necessary to evaluate the fatigue strength of spot welding at the good accuracy.
目的探索一种新的疼痛评估方法，使患者对疼痛强度能更简便、真实地描述。
Objective to find a proper way to assess the intensity of pain, which can be used to describe the patients' fee ling of pain simply and truly.
由这些参数生成了一个破断评估图来量化裂纹对材料强度的影响程度。
Using these parameters, a failure assessment diagram was generated to quantify the effects of the presence of cracks on material strength.
目的：观察不同强度的运动训练对大鼠骨骼肌谷胱甘肽抗氧化系统的影响，评估其抗氧化能力的适应性变化。
AIM: To observe the effect of exercise training of different intensity on glutathione anti-oxidant system in the skeletal muscles of rats, and assess its adaptive changes of anti-oxidant ability.
目的：观察不同强度的运动训练对大鼠骨骼肌谷胱甘肽抗氧化系统的影响，评估其抗氧化能力的适应性变化。
AIM: To observe the effect of exercise training of different intensity on glutathione anti-oxidant system in the skeletal muscles of rats, and assess its adaptive changes of anti-oxidant ability.
应用推荐