这些射频电波比调频收音机信号要强,其强度大约相当于X射线这类致癌放射线的十亿分之一。
Stronger than FM radio signals, these RF waves are still abillionth the intensity of known carcinogenic radiation like X-rays. (See pictures from an X-ray studio.)
胖客户机可以根据内容建立全面分级的安全性策略,而不是无论是否需要都以相同的密钥强度加密所有内容。
Instead of encrypting everything with the same key strength regardless of needs, rich clients can establish a comprehensive differentiating security policy based on the content.
然后苹果展示了一些智能手机的视频,包括iPhone4,当采取不同的握机方法时,它们的信号强度都出现了衰减。
Apple then posted videos of several smartphones, including the iPhone 4, suffering diminished signal strength when gripped in certain ways.
网络总体安全性的强度取决于其最薄弱的环节,而在移动商业网络中,最薄弱环节是客户机端设备。
The overall security of a network is only as strong as its weakest link, and in a mobile-commerce network the weakest link is the client-side device.
用有限单元法对缠绕式升船机卷筒的强度进行了分析计算。
The finite element method has been used in strength analysis for a wire reel of ship elevator.
新型搅拌捏合机的数学模型建立、动态模拟及其强度分析均是本文研究的主要内容。
The mathematical modeling, dynamic simulation and its strength analysis of the new stirring kneader are the center contents of this paper.
最终得到的承力机匣疲劳载荷谱为后续的强度与疲劳寿命分析及其试验谱的确定提供了依据。
The entire fatigue load spectra of supporting-case provide the bases for the establishment of intensity, fatigue life analysis and experiment spectra.
需要改进的地方是:它的滤水速率和湿纸幅强度较低,这些将是现代高速纸机湿部的瓶颈所在。
The drawbacks are acacia's low drainage rate and low initial wet web strength, which are bottlenecks to the high paper machine speed especially at the web forming.
全自动数控开榫机使用方便,调整简单,操作容易,具有安全、高效、劳动强度低、性价比高等特点。
The automatic CNC tenoners features easy use, simple adjustment, easy operation, high efficiency and safety, low labor intensity and high performance price ratio.
研究结果表明:小麦联合收获机任一点的振动强度、频率结构随工况不同而变化。
The results showed that vibration strength and frequency structure of any spot of the combine are different with the different working conditions.
攀钢高炉炉前开铁口设备一直使用简易的电动开铁口机,已不适应高炉高强度冶炼和铁口新型炮泥的要求。
Pansteel Blast Furnace used simply electric taphole drill for a long time, which cannot apply to higher smelting intensity and the new clay gun.
本文重点论述了环链式斗式提升机改造成板链式斗式提升机的过程及驱动轮轴的强度校核。
The paper reviews the process from ring chain type bucket elevator to plate chain bucket elevator and indicates the strength calibration of driving wheel axle.
虽然这种液压锻机比落锤锻造要昂贵得多,但它除了能给予大零件较高的强度和更均匀的组织外还有其它优点。
Although the hydraulic forging press is a more expensive piece of equipment than a drop-forge, it has advantages beside those of giving greater strength and more uniform structure to large components.
交通信号控制机(简称信号机),对减轻交警工作强度和维护交通安全畅通起着举足轻重的作用。
The traffic signal controller is important for reducing the work intensity of traffic policemen and for increasing the traffic security of roadway.
研究了采煤机滚筒截煤时所受的载荷分布情况,提出了用于煤机零部件强度校核的载荷计算方法。
The paper studies load distribution status on shearer cutting drum while it works, puts forward load calculation method used for strength verification of parts of mining machine.
针对目前磨粉机中磨辊轧距调节方式落后,工作强度大,效率差的问题,提出了磨辊轧距自动调节的方案。
Aiming at shortage of regulation of rolling gap, great intensity and low efficiency at present, a program of rolling gap automatic regulation was proposed.
测量各种建筑材料强度值的常用设备是液压式压力试验机。
The conventional equipment for measuring the strength of various construction materials is the hydraulic material testing machine.
计算结果指出:门机结构总体应力水平较低,其严重受力件主梁具有较大的强度富裕度,不必更换。
The results show that the crane is unnecessary to replace for its low total stress level and large strength margin of the main girder (main stressed part).
由于在焊缝部位存在焊接缺陷,采用传统的建立在构件无缺陷、无裂纹基础上的强度理论进行设计计算时,往往不能确保起重机在额定载荷下使用的安全性。
Since there are weld defects in welds, using traditional strength theory based on no defect and no crack to design, crane's security in rating load can't be insured.
利用扫描电镜和杠杆式万能强度试验机分析测定了涂层的表面形貌和附着力。
The surface morphology and adhesion power are analyzed and examined respectively by scanning electron microscope and lever style omnipotence intension test machine.
高强度的混合机,可以直接进行混合、分散、加湿和粉末成粒操作,用于化妆品和医药工业。
The Novamix Granulator is a high intensity mixer designed to intimately mix, disperse, wet, and granulate powders for the cosmetic and pharmaceutical industries.
在此基础上,进行了内燃机曲轴—轴承系统摩擦学、刚度和强度的耦合研究。
Then, the coupling of tribology, stiffness and strength of crankshaft-bearing system for internal combustion engine is studied.
采用可调气氛高温抗压试验机研究焦炭的高温抗压强度。
The high temperature compression strength was researched using a high temperature compressive testing machine with adjustable atmosphere.
设计了一款基于单片机(MCU)控制的高性能汽车高强度气体放电灯(HID)灯电子镇流器。
A high-performance ballast system controlled by microcontroller unit (MCU) was designed for automotive high intensity discharge (HID) lamp.
研究结果表明门机结构总体应力水平较低,严重受力件主梁具有较大的强度富裕度,可以保证超期服役的安全性。
The research shows that stress level of the crane structure is low and crane girder has large enough strength margin to assure the safety of using crane under extended service.
零件之间的接触与配合问题在内燃机零件强度和可靠性设计中是一个迫切需要解决的重要问题。
The contact and fitting between the engine parts are exigent problems in the design of intensity and reliability.
在声源、目标和接收机之间呈复杂的三角形关系条件下,找到了目标强度与入射角、分置角之间的关系。
When the configuration of source, target and receiver has complicated triangular relationship, the relationship among target strength, incidence angle and bistatic angle is obtained.
材料试验机研究的结果表明,在一定的淀粉乳浓度范围内,凝胶强度和弹性模量随淀粉乳浓度的增加而增加,而凝胶弹性则基本保持不变。
The test result showed that the gel strength and the elastic modulus was increased while the gel elasticity was almost not changed with the increasing of the starch concentration.
材料试验机研究的结果表明,在一定的淀粉乳浓度范围内,凝胶强度和弹性模量随淀粉乳浓度的增加而增加,而凝胶弹性则基本保持不变。
The test result showed that the gel strength and the elastic modulus was increased while the gel elasticity was almost not changed with the increasing of the starch concentration.
应用推荐