提出采用多层建模法预报边坡位移。
The method of multi-layer recursive modeling for predicting slope displacements is presented.
组合建模法是液压系统的良好建模方法。
Component modeling method is a proper tool for hydraulic system.
举出了一些计算实例，指出了极比建模法的特点。
Some computation examples are given and the characteristics of the class ratio modelling method is pointed out.
在这个教程中，你可以学习到最基础的简模建模法。
In this video tutorial you can learn the basics of low-poly modelling.
三维建模有三种方法：线框建模法、曲面建模法及实体建模法。
There are three methods of modeling in three dimensions: wireframe modeling, surface modeling, and solid modeling.
本文采取的方法有：图表法、对比分析法、数学建模法、文献法等。
In this thesis, many research methods will be adopted, such as literature, case study, graphology, and comparative analysis.
本文还通过一个实例说明响应建模法能从试验数据中获取更多的信息。
The linkage between response model methodology and dual response surface methodology has also been presented.
具有不可测输入的多变量线性系统状态观测器的设计方法有判定法和建模法。
It is well known, the design methods of an observer for linear multivariable systems are decision method and modeling method.
基于齿轮的范成加工原理，提出了一种变速比齿扇齿廓的定中心距齿轮建模法。
Based on the principle of gear machining generating method, a modeling method - variable center distance gear modeling method for variable ratio gear sector profile is put forward.
方法：利用DICOM数据建模法，建立下尖牙的三维有限元模型，模拟力学实验。
Methods: a 3-d FEM model of lower cuspid was established by using DICOMdata and stimulant mechanical experiment was carried out on the model.
方法：用流率基本入树建模法构建系统流图，用VENSIM软件进行模拟分析和干预。
Methods: Using the SD model to build the SD diagram and using VENSIM to do stimulation analysis and intervention.
流率基本入树建模法不仅实现了规范化建模，而且有利于反馈环的计算和反馈性分析清晰化。
SD rate variable fundamental in-tree modeling not only realizes standardization of modeling but also is beneficial to calculation of feedback loops and perspicuity of feedback analysis.
实验结果表明PLS - SV M建模法的预测效果明显优于常规的PLS回归建模方法。
Experimental results show that the forecast effect of PLS-SVM model precedes obviously the common PLS model.
本文论述了液压大系统模块式建模法的基本原理，建立了元件模型和由元件模型生成系统模型的一般方法。
This paper deals with the basic principles of the modularity modelling method, establishing the models of components, and a general method of generating the system model from the models of components.
我们认为响应建模法能在改进产品的参数设计起到重要作用，具有一些双重响应曲面方法不能替代的优点。
By a practical example, we point out that the response model methodology can get more information from experiment da…
运用平均开关建模法，建立非理想PWM开关的非线性大信号平均模型，包含全部寄生电阻和二极管的正向压降。
Using the averaged switch modeling approach, a non-linear large-signal averaged model of non-ideal PWM switch is derived, taking into account all parasitic resistances and threshold voltage of diode.
在传统的PWM整流控制的基础上，论文利用开关函数建模法，提出了基于预测电流的PWM电压空间矢量控制方法。
Based on the traditional control on PWM rectifier, space vector PWM predictive current controller is presented using the switching function model.
本文探讨并解决了微分动态模型GM（1，1）的严格微分拟合问题，给出了GM（1，1）的严格微分拟合建模法。
This paper tries to discuss and solve the problem of the striets fitting of the differential dynamic model GM(1,1), and give a strict fitting method for building GM(1, 1)model.
由于PLS - SV M建模法先通过PLS提取输入光谱的数据特征，因此有效降低了SVM模型输入变量的维数。
First of all, because it extracts data character of input spectrum by using PLS, so the dimensions of input variable of SVM modeling are decreased effectively.
在C62货车模型的基础上，通过动力学仿真软件SIMPACK，采用滚动体接触建模法解决了用集装箱装载液体货物的模型问题。
On the basis of an integrated model of C62 freight car, the problem of modeling for liquid transport with containers with dynamic software SIMPACK and contact modeling method.
基于GM(1,1)直接建模法，本文提出了建立灰色Logistic模型的一种方法，并进而建立了温州市人口的灰色Logistic模型。
Based on the GM (1, 1) direct modeling method, a method of establishing grey logistic model is put forward, and a grey logistic model of Wenzhou population is obtained.
于是MonteCarlo 法使用基本上是随机的输入（带有一些现实的限制）去为系统建模，并产生可能的结果。
So a Monte Carlo simulation uses essentially random inputs (within realistic limits) to model the system and produce probable outcomes.
用户使用工具的方式：不同类型的用户会以不同的方式使用分类法建模系统。
How users will use the tools: different types of users will use the taxonomy modeling system in different ways.
订阅和发布系统：在某些情况下，一个系统可以同时向分类法建模系统进行订阅和发布。
Subscribing and publishing systems: in some cases, a system can both subscribe and publish to the taxonomy modeling system.
此环境包括建模工作的风险、复杂性、工具、表示法，和目标。
This context includes risk, complexity, tools, notation, and objective (s) for the modeling effort.
许多软件厂商已经开发和发布了分类法建模应用程序，这些应用程序是为通用企业应用设计的，并不仅限于特定的系统。
A number of software vendors have developed and released taxonomy modeling applications that are designed for generic enterprise use and are not tied to specific systems.
统一建模语言(uml)已经成为用于软件体系架构和设计的软件开发行业标准表示法。
The Unified Modeling Language (UML) has become the software development industry's standard notation for software architecture and design.
对分类法和分类法子集进行集成的技术方法，通常取决于分类法建模系统和目标系统的功能。
The technical method for integrating taxonomies and taxonomy subsets is typically dictated by the capabilities of both the taxonomy modeling system and by the target system.
事实上，Ideogramic已经开始开发基于手势的建模工具，其目标是e - GIP Soft wareAG开发的专用表示法。
In fact, Ideogramic is already developing a gesture-based modeling tool that targets a proprietary notation developed by e-GIP Software AG.
要使用Rational建模的标准UML表示法，只需要明晰这些元素即可。
To use the standard UML notation of Rational modeling, simply clear the elements.
应用推荐