板形平坦度自动控制系统是板带材冷连轧机过程控制系统的重要组成部分。
Flatness automatic control system is an important part of process control system of sheet or strip continuous cold rolling mill.
磁测量能更准确、更全面的反映带材的本征特性,是今后高温超导带材性能测试的重要方法。
The magnetic strength measurement can reflect the tape′s original characteristic more accurately and more entirely, which is the important method for the measurement of High Tc tape′s properties.
该系统可对超导带材的稳定性参数进行测试,这对研究超导磁体的设计和失超保护具有重要的实际意义。
The stability parameters of superconducting tape can be measured by this system, and this work can be of real significance in the design and protection of superconducting magnet.
板形仪是安装在冷轧带材轧机上的检测系统,用于检测带材板形,以控制成品带材的质量,提高经济效益。
The shape meter is a detecting system fixed on the cold rolling strip mill which detects the strip shape to control product quality of strip and improve economic benefit.
介绍了带材生产线中卷取机功率的计算方法。
The calculation method of recoiler power in the strips' production is introduced.
铝及铝合金。试验方法。板材和带材的凸耳试验。
Aluminium and aluminium alloys. Test methods. Earing test for sheet and strip.
铝青铜中厚板,薄板,带材和轧制棒材标准规格。
Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar.
它可使被矫带材产生纵向拉伸应力和横向弯曲应力。
It can provide the strip with longitudinal tensile stress and transverse bending stress.
本文研究了粉末轧制镍多孔带材纵向性能的均匀性。
The authors have investigated the homogeneity of the longitudinal properties of the porous nickel strip produced by powder rolling.
油膜轴承以其独特的工作性能广泛应用于大型板带材轧机。
Oil film bearing, for its superior performance characteristics, has been widely used in the hot strip mills.
介绍了双带快冷法制备金属带材新技术的基本原理和特点。
The principle and characteristics of double cooling-strip rapid solidification technique for strip forming are introduced.
锥辊辗轧理论的研究开拓了带材轧制和随后深加工的新领域。
Theoretical study on the rolling process with conical rollers has devel-oped a new field for rolling and other advanced cold working of strip steel.
薄带材和箔材的平直度或板形控制必然要求一定程度的模型化。
The control of thin strip and foil flatness, or shape, inevitably requires some degree of modelling.
用带材样品对测厚仪进行检测和校正,并进行必要的调整和修正。
The thickness gauges should be tested and calibrated with samples of strip and any adjustments or corrections should be made.
实验表明退火后的带材表面光亮度良好,机械性能和晶粒度均匀。
Experimental annealing proved that the strip thus annealed has a bright surface and is uniform in mechanical properties and grain sizes.
采用该方法分析柔性制管过程变形带材的位移场、应变场和应力场。
By this method, the displacement fields, the stress fields and the strain fields of the deformed strip during flexible forming process are obtained.
采用双辊法和双带法制备的快速凝固带材,存在着较大的横向厚差。
In the twin cooling-strip and twin roll rapid solidification method, the metal strip has lateral thick difference.
影响带材性能的主要因素有原始金属粉末的工艺性能和轧制工艺条件。
The key factors affecting properties of rolled strips include technological properties of original metal powder and technological conditions in powder rolling.
厚度控制系统的稳定性直接影响着铝板带材的厚度控制精度和成品率。
To produce aluminum strip with high precision thickness, various control technologies should be coordinated synthetically.
前驱粉末装管法(PIT)是目前铋系高温超导带材制备的主要方法。
Presently powder in tube process (PIT) is the main method to fabricate bismuth system HTS tapes.
中文摘要本文对高温超导带材在工频过电流冲击下的性能进行了研究。
In this paper, the performances of HTS tapes under over-current were systematically investigated.
板形(平直度):在卷取张力建立后,F4机架出口带材目测无波浪。
Profile (flatness) : after the establishment of coiling tension, there shall be no wave in the F4 mill stand exit in visual.
本发明提供了一种板带材轧制用变凸度工作辊,其辊形曲线采用复合函数。
The invention provides a variable convexity working roll for rolling plates, sheets and strips, and a roll shape curve thereof adopts a composite function.
轧钢过程中的负荷扰动容易激起机电振动,这严重影响板带材的产量和质量。
The output and quality of metal plate and strip are heavily affected by electromechanical vibration in rolling process.
本工作采用单辊辊面为冷却介面,研究控制快速凝固带材的横向厚差的方法。
To control the lateral thick difference of rapid solidification strip, the single-roll cooling interface is applied.
以弹性小挠度理论,采用能量法建立了较简便实用的轧后带材失稳判别模型。
The more practical and simple distinguishing model, ofthe rolled strip's stabilization is set up with energy method that depends on small-deflection elastic theory.
根据实测两向单位摩擦力,提出了确定带材轧制过程金属横向位移的新方法。
This paper puts forward a new method with which the lateral displacement of metal in strip rolling process is determined through measuring frictional stresses in two directions.
根据实测两向单位摩擦力,提出了确定带材轧制过程金属横向位移的新方法。
This paper puts forward a new method with which the lateral displacement of metal in strip rolling process is determined through measuring frictional stresses in two directions.
应用推荐