并通过成功的应用实例,论证了带压密封技术在确保电力系统安全长周期运行,避免非计划停产方面的突出效能。
And a successful example proves that the technique of online leak sealing has a prominent function in ensuring the long period safe operation and eliminating unexpected shutdown of power supply plant.
带压堵漏;法兰夹具设计; 注剂;
Flange clamp; flange clamp design for on-line sealing; injectant;
分析了带压安装温度变送器的工艺过程。
The processing of mounting temperature transducer under pressure is mainly described.
并给出了采用带压堵漏技术的三则应用实例。
The article provided three examples using holes plugging technology under pressure.
阀杆与阀盖之间带倒密封结构,便于阀门带压更换阀杆填料。
Valve rod with valve lids between bring fall airproof structure, Convenients for valve bring press replacing valve stem packing.
提出了带压开采煤层的方案,并对该方案的可行性进行了论证。
Finally a plan of coal mining under pressure is put forward, and the feasibility of the plan is demonstrated as well.
本文介绍带压堵漏原理,夹具制作过程,以及在电厂中的应用。
This paper introduced the method of leaking stoppage under pressure, the process of clamp making and the application in thermal power plants.
实际生产矿井带压开采突水事故证明了突水系数修正公式的合理性。
The water inrush accident occurred from pressurized mining in the actual production mine verified the rationality of the water inrush coefficient revised formula.
目的研究球后阻滞麻醉后使用袖带压迫降压法对间接眶压和眼压的影响。
Objective To study the effect of ocular compression on indirect orbital tension(IOT) and intraocular pressure(IOP) following retrobulbar anesthesia.
介绍了一种新型的可带压更换阀杆密封的结构,分析了该结构的优良性能。
Introducing a new type of structure for replaceable stem seal sleeve with containing pressure and analyzing its high performance.
采用多效带压泵的浓缩系统,可大大减少加热蒸汽的消耗量,降低生产成本。
The application of concentration system with multi - effect thermal compression pump could reduce the consumption of the steam and lower the production cost.
在井内加压下进行水泥胶结测井带压作业,其目的是将微环空与串槽区分开。
The purpose of cement bond log (CBL) under increasing borehole pressure is to differentiate micro annulus from bypass channel.
提出一种简单有效的方法计算带压仓负荷的开机过程,能大大节省计算时间。
An efficient and simple calculation method is pro-posed for the simulation of the startup process with base load, which can greatly save computation time.
研制的带压作业油管接箍探测仪主要由传感器、报警器、激磁器等部分组成。
It is mainly composed of three parts: transducer, alarm device and magnetic field exciter.
分析新高压汽包一批新安装阀门泄漏原因,并详细介绍带压堵漏所采取的措施。
The paper analyses the leaking reasons for the newly installed valves of the new HP steam drum, and describes the measures to plug the leak under pressure.
变压煤气发生炉是一种以碎煤为原料直接生产带压原料煤气和燃料煤气的制气设备。
The pressure swing gas producer is a kind of equipment which can directly produce gas with certain pressure and making use of pieces coal.
试图现场修理违背了两条非常重要的安全惯例:禁止带压修理设备和禁止堵塞减压装置。
To attempt field repair is a violation of two very important safety practices. NEVER attempt to repair equipment under pressure and NEVER tamper with pressure-relief devices.
非能动的系统由大容积的水箱(安注箱)组成,箱内装有硼水,上部由带压的氮气覆盖。
The passive systems consist of large volume tanks (accumulators) which are filled with borated water and pressurized with nitrogen gas.
在总结国内带压密封技术的研发和现场实际应用的基础上,首次提出了带压密封工程的概念。
On the basis of research and field application for the online leak sealing techniques, the concept of the leak sealing engineering under pressure is presented firstly.
单侯矿井水文地质条件比较复杂,下部煤层受奥灰水威胁,薄隔水层带压开采问题非常突出。
The hydrogeologic condition of Danhou mine is complex, and the sublevel coal is threatened by O. L. water. It is very difficult that thin confining bed coal is mined under pressure.
带压开采是承压水上采煤的主要方法,底板采动破坏深度的确定是实现带压开采的关键和前提。
"Mining above aquifer", as the main method to explore coal seams above confined aquifer, in which the determination of coal seam floor failure depth is the key factor and precondition.
针对不同部位泄漏特点提出了直接钻孔法、夹具堵漏法、铜丝围堵法、钢带围堵法等带压堵漏方法。
Some methods of leakage blocking with pressure are direct drilling, plugging with fixture, copper wire leakage blocking and belt of Steel leakage blocking.
此外还对组合式夹具的现场实施带压密封技术的方法和注剂密封胶的合理选择作了进一步的分析说明。
The methods of on-line pressure seals and the proper choice of injecting sealant while implementing assembling clamp were further analyzed.
目前带压密封夹具设计理论存在一定缺陷,本文分析并指出在UG软件环境下进行夹具设计和实体建模的优越性。
This article analyzes the limitation about the design theory of the on-line pressure sealant clamps and the advantage of the clamps design and modeling at platform of UG.
介绍了化工设备带温带压粘接堵漏的常用方法及其影响因素。结合实例,阐述了该技术在化工设备运行状态下的应用情况。
The general methods and effect factors of adhesive blockage technique on-line operation with temperature and pressure were introduced. Some examples of its application were given.
介绍了化工设备带温带压粘接堵漏的常用方法及其影响因素。结合实例,阐述了该技术在化工设备运行状态下的应用情况。
The general methods and effect factors of adhesive blockage technique on-line operation with temperature and pressure were introduced. Some examples of its application were given.
应用推荐