介绍了工业纯钛的特性及焊接性。
The performance and weldability of industrial pure titanium were recommended.
在工业纯铜中加入微量锂能提高其再结晶温度。
Trace lithium can improve recrystallization temperature of pure copper.
探讨了熔剂过滤净化工业纯铝的效果及其净化机理。
The purification of commercial aluminum by filtrating with high-efficient flux for removing inclusions and its mechanism were studied.
采用不同的工艺参数对工业纯铁进行了离子渗镍试验。
Different process parameters were employed in this paper to experiment on ion nickelizing by double glow discharge.
用高能振动喷丸法对工业纯钛进行了表面纳米化的研究。
The surface nanocrystallization is approached on a commercial pure titanium by using high energy shot peening(HESP) technique.
研究了工业纯铝中加入镁、钙、硅、铁对其导电性的影响。
Alloying effects of Mg, ca, Si and fe elements on electrical conductivity of industrial aluminum have been studied.
浓硝酸储罐多为多支座卧式容器，材质为工业纯铝1060。
Most of Concentrated nitric acid tanks are with multi-supports, the material of which is pure aluminum 1060.
工业纯钛经喷丸、滚压强化后，疲劳强度得到不同程度的提高。
The fatigue strength of commercial purity titanium was improved through shot peening or cold rolling treatment.
结合实际工作中的应用，针对工业纯镍的管材焊接工艺进行探讨。
Combined the application of actual work, the welding procedure of industrial pure nickel pipe is discussed.
本文提出一种铁水粒化-固态脱碳-电炉重熔制备工业纯铁的新工艺。
A new way for making industrial pure iron is put forward. It includes three steps-hot metal granulation, solid state decarbonization and electric furnace melting down.
本文利用高能振动喷丸技术对低碳钢和工业纯钛进行了表面纳米化处理。
The surface nanocrystallization of a low carbon steel and commercial pure titanium was realized by using high-energy shot peening technique.
结果表明，T2工业纯铜在BC路径下经历多次挤压后，晶粒得到细化。
The results show that, when the T2 pure copper is extruded in multipass by route BC, the grains can be refined.
本工作应用表面分析技术研究了工业纯钛在溴化钠溶液中的孔蚀引发过程。
The pit initiation process on commercially pure titanium in bromide solution was investigated by means of surface analysis.
采用高能喷丸方法使工业纯钛疲劳试样的表层实现纳米化，并进行了疲劳试验。
Fatigue test was carried out for commercial pure titanium that have nano-crystallized in surface by high-energy shot peening.
结果表明，如果选择适当的注入离子和注入工艺，可以大大提高工业纯钛的析氢活性。
The results show that the activity of hydrogen evolution of industry titanium could be improved greatly by suitable implanted ions and process.
介绍了工业纯钛的特性和钛网孔波纹板除沫器的结构特点、制造焊接方法及抗腐蚀性能。
The performance of industrial titanium, the structure feature of titanium mesh ripple plate demister, the manufacturing welding method and the corrosion resistance were recommended.
本论文选用工业纯铜板材作为研究对象，对其进行了不同道次的异步叠轧和再结晶退火实验。
In this paper, the copper sheets were subject to asymmetrical accumulative rolling-bonding (AARB) by different passes and recrystallization annealing.
结果表明：超细晶工业纯钛在热压缩过程中，热压缩条件不同流动应力变化规律会有所差异。
The results showed that the flow stress of UFG CP-Ti would change significantly with the thermal compression conditions.
研究了超声波处理时间对工业纯铝铸锭结晶组织的影响，即添加除气剂又进行超声波处理的情况。
In this study, the effect of ultrasonic treatment time on crystallization structure of industry pure aluminum ingots was investigated.
利用等通道转角挤压(ECAP)技术挤压工业纯铝l2，探讨了挤压次数对其力学性能的影响。
The effect of ECAP passes on materials mechanical properties of industrial pure aluminum L2 was investigated with equal channel angular pressing (ECAP) process.
研究了工业纯铁、20钢、45钢辉光离子渗铝层生长规律，测定了渗层铝浓度分布和显微硬度分布。
The growing principle of aluminizing layer is given for in-got iron, steel 20 and 45.
前言：研究了超声波处理时间对工业纯铝铸锭结晶组织的影响，即添加除气剂又进行超声波处理的情况。
In this study, the effect of ultrasonic treatment time on crystallization structure of industry pure aluminum ingots was investigated. e. g. : with degasser and ultrasonic.
冷轧工业纯铜及316L不锈钢处理样品表面均发生重熔现象，处理面上形成类似火山坑的显微形貌。
The results are listed as following: 1 the top surface layers of CRIC and 316l SS sample were remelted under the irradiation of HCPEB. Crater-like morphology was formed on the treated surfaces.
采用交流阻抗技术结合恒电流阴极充氢和动态阴、阳极极化法，研究了工业纯钛在海水中的阴极极化性能。
The cathodic polarization character of industrial pure titanium in sea water was studied by meas of ac impedance technique, galvanostat cathodic charging and dynamic polarization technique.
对工业纯钛的初步试验结果表明，用激光进行固态扩散渗氧处理可以明显改变钛表层组织、硬度和耐磨性。
The experimental results on commercial pure titanium verify the obvious changes in the microstructure, hardness and wear resistance after laser solid diffusion treatment.
本文研究工业纯铝中含RE（混合轻稀土，含量为0～0.275％）时对7075合金组织和性能的影响。
The effects of RE (mixed light RE, 0—0.275%) content in commercial pure aluminium on the structure and characteristics of 7075 alloy are investigated in this paper.
文中主要研究了工业纯钛在室温下进行ECAP多道次变形的组织结构演变，并测试了变形试样的力学性能。
Special attention was paid on the microstructure evolution and mechanical properties of the ECAP samples. Deformation twins were found in most grains after the first and second pass of ECAP.
研究了工业纯铜T2在77K温度下快速压缩变形的组织变化和再结晶退火温度、时间对其组织、性能的影响。
The microstructure and hardness of T2 copper subjected to stamping deformation at 77 K and subsequently recrystallization annealing were studied.
研究结果表明，联苯胺修饰膜对工业纯铁有很好的保护作用，在弱酸性、氯化钠以及强碱性介质中有良好的阻蚀性能。
The research results showed that the modified film had good anti-corrosion performance in weak acid, neutral solution containing Cl- and strong alkali.
上述生产工艺由于彻底去除了氧化层并在焊接过程中采用了氩气保护，所以保证了加工成型后的钛配件与工业纯钛的性能一样。
This process totally avoids oxide layer on the welding material with the protection of argon, so guarantees the performance of the parts is the same with the metal of industrial titanium.
应用推荐