织物层板放进一个大型钢模具以塑型。
Layers of cloth are placed into a large steel tool, which provides the shape to be moulded.
各种木料的层板很容易切割。
用应变片法测量了层板中铝层的残余应力；
The residual stresses were measured by means of strain gauges.
本文用混合杂交单元分析复合材料层板的瞬态动力响应。
In this paper a mixed hybrid-stress element is applied to analyzing transient response of layered composite plates.
复合材料层板由玻璃纤维和树脂混合层以及泡沫层组成。
The composite material sheet is made of the fiberglass, colophony and foam.
采用差分方法求解了迭层板的非线性流固耦合动力响应；
The nonlinear dynamic solid fluid interaction response is solved by means of a difference method.
液体火箭发动机发汗冷却推力室的结构层板可能出现受热皱损。
Heat transfer possibly results in the thermal wrinkling of transpiration cooling platelet of the liquid rocket engine (LRE) 's thrust chamber.
自制橱柜往往从市场上采来普通层板和五金配件就认为是好的了。
Abstain ambry to often be collected from the market come common layer board had considered as with hardware fittings.
在层板双面的上层都覆盖装饰面，形成一个完全结实黏合的整体。
Decorative overlays are applied to both faces, resulting in a complete solid and bonded structure.
内立柱可根据需要前后调节移动，层板可上下自由调节，便于安装；
The inner standing columniation can be adjusted from front to back as per different request, and the layer plate can be adjusted fluctuated to fix easily.
然后利用双三角级数构造满足层板分层区位移边界条件的位移模态。
Then, a trigonometric series is applied to describe the displacement mode satisfying the boundary conditions.
本文描述了在釉质人工龋形成过程中，表层的各种改变，包括层板状病变。
The paper gives a description of several changes of the surface layer during formation of artificial caries in enamel.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
然后由变分原理并进行线性化得出了含内埋圆形或椭圆形脱层板的屈曲特征方程。
Then, buckling characteristic equations for laminates with built-in circular or elliptical delaminations are derived by using the variational principle and linearized method.
层板灯、顶板灯、各种内置、外置式厨柜专用灯。注：该配件不在每米计价范围内。
Lamps: Shelf lights, roof lights, a variety of built-in, external cabinets special lights. Note: The accessories are not per meter pricing range.
以悬臂复合层板为研究对象，利用理论模态分析技术，研究了复合层板的动态特性。
This paper analyzes the dynamic characteristic of complex plywood by the theory modal analysis technology.
本文推导了计算多向复合材料层板弹性模量的公式，计算结果与实验结果符合得很好。
The formula for calculating the elastic constants of the composites laminates is derived in this paper. The calculating results agree with the experimental values.
这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。
The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.
在辛几何数学框架下，采用共轭辛正交归一关系给出精确解，并与经典层板理论进行了比较。
The analytical solution for the Angle ply laminated plates is derived by the adjoint orthonormalized symplectic method, and is also compared with the Kirchhoff plate theory.
结果表明，这一分布模型能够更全面地描述复合材料层板静态强度和疲劳剩余强度的统计特性。
The results showed that the statistical characteristic for static strength and residual fatigue strength of carbon epoxy laminates could be properly described by this distribution model.
介绍探测复合材料层板基体裂纹的三种实验技术：声波发射探测，超声波c扫描和复制带记录。
Three experimental techniques for detecting matrix cracking evolution in composite laminates are investigated: acoustic emission detection, ultrasonic wave C-scan, and replica tape record.
根据三层不锈钢板电阻点焊熔核形成过程，建立了模拟三层板点焊温度场的轴对称有限元模型。
An axisymmetric finite element model is developed to simulate the temperature field of resistant spot welding according to the process of nugget formation of three layers stainless steel sheets.
如果树脂凝胶前挥发物的蒸气压力超过树脂流体的压力，则会在层板中生成孔隙，而且孔会长大。
If the volatile vapor pressure in the curing laminate exceeds the actual pressure on the liquid resin prior to gelation, then void formation and growth will occur.
印制板和其它互连结构用材料。包被和非包被增强基材。酚醛纤维素纸增强铜包被经济级叠层板。
Materials for printed boards and other interconnecting structures - reinforced base materials, clad and unclad - phenolic cellulose paper reinforced laminated sheets, economic grade, copper - clad.
为智能叠层板自由振动问题和带有压电块的叠层悬臂梁的瞬态响应等问题提出了一种新的半解析法。
A new semi-analytical solution for the natural vibration of smart laminated plates and the transient response of the laminated cantilever with piezoelectric patch was presented.
本文初步探索了几种纤维增强铝合金胶接层板的成型工艺，并评定了这些层板的力学性能和抗分层性能。
In this paper, the manufacture process, the mechanical and delamination properties of several kinds of fiber reinforced aluminium laminates have been studied.
本文初步探索了几种纤维增强铝合金胶接层板的成型工艺，并评定了这些层板的力学性能和抗分层性能。
In this paper, the manufacture process, the mechanical and delamination properties of several kinds of fiber reinforced aluminium laminates have been studied.
应用推荐