圆柱形导柱，镀铬防锈处理。
Cylindrical guide pillar — chromium plating and anticorrosive treating.
本文的优化方法可有效地减小斜导柱结构尺寸。
The structure sizes of inclined guide pin can be decreased effectively by the optimization method.
通过采用斜导柱、弹簧等实现了塑件侧孔成型；
The molding of side holes was achieved by using angle pin and spring;
顶针导柱的安装。
导柱外表面自上而下呈与弧形内凸头配合的波浪状。
The outer surface of the guide post is in a wavy shape matched with the arc-shaped inner concave head form top to bottom.
模具设计成斜导柱侧抽芯，利用复位杆复位，以顺利脱模。
The die with oblique side of guide pillar to take out core and release link was designed to take off mould smoothly.
本文从理论上分析了注塑模具中斜导柱铣扁后的受力状态。
This textual is a theoretical analysis of force on the angular ogee milling the flat surface in injection molds.
本发明的装置应用于安装冲头，应用于使用与导柱结合的导套。
The device is applicable for mounting punches, for using dowel bushes combined with a guide post.
着重介绍了模具的抽芯结构，并对抽芯力及斜导柱进行了核算。
The die structure combined advantages of the side core-pulling and lifter body.
利用几何方法推导柱塞偶件密封性试验中相对回转角度的计算式。
The calculating equation of the relative rotating Angle in the leakage test of plunger and barrel assembly has been deduced by the geometric method.
还介绍了一种线切割内导柱孔方法，减少了制造过程中的一些环节。
In order to reduce manufacturing progress, a measure how to cut inward oriented hole is introduced.
斜导柱是型腔模具中典型的结构零件，对其实现自动化设计很有必要。
Since the Angle pin is a typical structural part of the mold, it is necessary to design automatically.
极靴配合磁电式堵漏器使用时，用导柱旋钮结构进行安装，方便快捷。
When the pole terminal is used by matching with a magnetoelectric leak stopper, the pole terminal is installed by a guide pole knob structure, and the operation is convenient and quick.
运用可靠性设计原理， 对塑料注射模常用的斜导柱式抽芯机构进行分析。
By using the principle of reliability design, the withdrwal core mechanism with bevel lead column in plastic injection mould is analyzed.
通过采用斜导柱，弹簧等为动力实现了侧孔，卡钩等注塑件上的侧成型特征。
Through the use of ramp post, spring achieved to provide the side molding characteristics such as a side hole and a hook for driving force.
本机合模装置属液压式结构，主要由导柱、动模板、支承板、锁模油缸等组成。
This device adopts hydraulic structure and is mainly made up of guide pole movable platen support plate and clamping cylinder etc.
设计了摆钩分型式、弹簧分型式、导柱定距式等双分型面模具的定距分型机构。
Given-distance parting mechanism in the mould with bi-parting surface was designed including pendulum-hooked parting, spring parting and given-distance leader parting.
采用浮动型芯及斜导柱抽芯机构，生产效率高，对同类注塑件生产提供了有益的借鉴。
Adopted floating core and Angle guide pin core-pulling mechanism, production efficiency was high, it had a certain reference function to similar plastic mold.
该离合器由离合器本体、本体支承轴承、钢珠座、钢珠、导柱、弹簧和调整螺钉组成。
The clutch is composed of a clutch body, a support bearing of the body, a steel ball seat, a steel ball, a guide column, a spring and an adjusting screw.
应用锁扣装置、组合拉杆结构，减少导柱数量，简化了多点多板多分型面注塑模具的设计。
The design of the injection mold of multiple points, plates and molded surfaces is simplified by using lock catch facility, joined tie-bar structure and decreasing the guide-pin amount.
采用一种气缸配合导柱导套结构来作为气垫，这一改进结构稳定可靠，快速满足用户的特色需求。
By adopting a structure combining the air cylinder and guiding-column and guiding-cover as a cushion, the special requirement of the customer has been satisfied quickly for the stable structure.
此模具拥有液压缸压缩、二次浇口注射，以及锥面与导柱的二次定位等特点，能够准确地保证塑料透镜的精度。
The mold employed fluidcylinder, secondary gate, secondary locating with pyramidal face and guide pillars, which ensured the precision of the plastic aspheric lens.
通过分析压力机调试过程中存在的问题以及影响压力机几何精度的主要因素，介绍了精度调试的新方法——导柱测量法。
Guide post measuring, a new precision adjustment has been introduced with analysis of existent problems in adjustment of press and main factors influencing geometry precision of press.
在柱坐标下从微分波动方程出发，推导柱面光波的场分布，并利用远场近似条件导出当线光源与光轴成任意角度时，在垂直光轴方向的参考面上的复振幅表示。
The expression of complex amplitude is given in reference plane vertical to the optical axis by far-field approximation when the line source and the principal axis are at any Angle.
在柱坐标下从微分波动方程出发，推导柱面光波的场分布，并利用远场近似条件导出当线光源与光轴成任意角度时，在垂直光轴方向的参考面上的复振幅表示。
Starting from the wave differential equation, a method is deduced to express the complex amplitude of light wave fields in the reference plane which is vertical to the optical axis.
结果表明，导柱材料化学成分超标，同时存在严重的铸造缺陷组织，增加了材料应力集中的程度，降低了材料的力学性能，从而导致导柱零件在淬火时产生开裂。
The results showed that the stress concentration is increased, the mechnical property is lowed, the chemical compositions overran and the serious cast defects is existed in the plunger.
结果表明，导柱材料化学成分超标，同时存在严重的铸造缺陷组织，增加了材料应力集中的程度，降低了材料的力学性能，从而导致导柱零件在淬火时产生开裂。
The results showed that the stress concentration is increased, the mechnical property is lowed, the chemical compositions overran and the serious cast defects is existed in the plunger.
应用推荐