这不仅在视觉上很迷人,而且对振动效果十分必要。
This was not only visually appealing, but essential for the vibrational effect.
研究结果增强了对振动过程中土-水之间相互作用机理的理解,同时为自由场地震响应分析方法的验证提供了基础数据。
The results further our understanding of soil-water interaction under shaking, and provide the data for validating the analytical methods of the seismic response of free ground.
利用所提分析模型对振动台试验模型进行了弹塑性时程分析,计算结果与试验结果吻合良好,验证了分析模型的正确性。
Analytical results of elastoplastic time history analysis correlated very well with the experimental results of the shaking table test, proving the validity of the proposed model.
对振动光饰机的受力和运动进行理论分析。
The acting force and motion of vibratile tumbling machine are analysed theoretically.
对振动球磨法制取超细碳化钨粉末进行了研究。
Study is made of the vibrating ball miling for ultra-fine WC powder preparation.
研究结果对振动人机工程学研究和应用有重要意义。
The above findings might be applicable to studies of vibration ergonomics.
本文是全文的第三部分,介绍负载参数对振动特性的影响。
The third part of this paper deals with the effects of lead parameters on vibration characteristics.
最后给出数值结果,表明磁场的变化对振动频率及衰减系数的影响。
By using a numerical method, the effect of changing in magnetic field upon vibration frequency and coefficient of reduction is presented.
通过对振动现象及有关数据的分析,详细阐述了振动的诊断及处理。
The diagnosis and treatment of oscillation are detailed through the analysis of oscillation phenomenon and the associated data.
论述了振幅与振动钻削机理之间的关系以及对振动钻削钻头寿命的影响。
The relation between amplitude and vibration drilling mechanism and the impact of amplitude upon the life of drill with vibration drilling are described.
通过对振动监测所得的振动参数的分析,可防止振动对机组造成更大的危害。
The analysis of the vibration parameter gained from vibration monitoring could prevent vibration from resulting more damage to the unit.
本文介绍了振动机构的几种形式,并对振动机构的传动效率进行了计算与分析。
Some kinds of vibration mechanism were introduced and drive efficiency of vibration mechanism was calculated and analyzed.
采用ANSYS软件对振动网孔雾化器的模型进行了静力、模态和谐响应分析。
Static, modal and harmonic analysis are used to analyze the vibrating mesh nebulizer in ANSYS.
列车运行速度对振动速度、振动加速度的影响比对动应力、动变形的影响更显著。
Train velocity has little influence on the dynamic stress and dynamic deformation of subgrade bed, but has obvious influence on vibrating velocity and vibrating acceleration.
以包装件的力学模型为依据,用脉冲响应法求解产品中易损零件对振动环境的响应。
Basis on the dynamics model of the product package system, the response of vibration environment in fragility part of this system is calculated with the method of pulse response.
对振动位移信号用于铣刀破损监测进行了详细的研究,建立了铣削过程的切削力模型;
The monitoring of milling tool breakage using vibration displacement signal is studied in detail. A mathematical model of the milling force is established.
考虑到不同损伤存在形式,计算分析了损伤对振动频率、模态以及声辐射特性的影响。
Influences of various types of damages on natural frequencies, vibration modes, acoustic radiation power and directivity of sound are studied.
振动钻削在钻削过程的不同区段,其特征和钻削机理不同,对振动参数的要求也不一样。
The characteristic and drilling mechanism are different at different drilling segment. It also requires different vibration parameters.
因此对振动信号的采集和处理、系统辩识、振动和噪声控制等方面的研究变得尤为重要。
Therefore, it's important to acquire and process vibration signals, differentiate and analyze the system, control the vibration and noise.
将虚拟仪器技术、网络技术应用到实时振动控制系统中,实现了对振动控制系统的远程监控。
Remote monitoring of vibration control system is achieved by the application of virtual instrument technology and network technology to real-time vibration control system.
同时,由于系统采用双折射透镜实现了共光路设计,使得本系统对振动和温漂有很好的抑制作用。
Besides, the system has strong ability of overcoming environmental disturbance due to its common path design with a birefringent lens.
通过软件的方法设计了相关滤波器,实现了对振动信号的数字滤波,有效地提高了精度和工作效率。
Using software technology to design correlation filter, the digital filter of vibration signal was realized and the precision and work efficiency was improved.
为消除铝合金预拉伸板中的残余应力,采用弹塑性有限元法对振动时效消除残余应力进行数值模拟。
To eliminate the residual stress of aluminum alloy pre-stretching board, an elastic-plastic finite element model was developed to simulate the vibratory stress relief (VSR) process.
对振动流化床的基础研究资料进行分析和归纳,结合实际选型经验,提出振动流化床的设计计算方法。
Analyze and sort out basic research information of vibrating fluidized bed, put forward design calculation method of the vibrating fluidized bed.
叙述了该公司对振动出矿工艺进行结构和机械改进设计的情况,说明了该项改造所取得的效果与经济效益。
The mechanical and structural design improvement of the vibrating technology made by the company and the efficiency and economical benefit achieved through the transformation are described.
介绍了埕岛油田海上固定导管架式平台的振动安全检测方法,重点对振动隐患治理的程序和方法进行了探讨。
This article introduced methods for vibration detection of off-shore fixed jacket platform of Chendao oilfields. The treatment procedure and method of vibration has been discussed emphatically.
本文的主要研究内容是:通过分析STM对振动的敏感性,提出基于隧道效应的纳米级振动测试方法的设计。
The main contents in the dissertation are as follows:Analyzing the sensitivity to vibration of STM, putting forward the design of nano level vibration measuring method based on tunneling effect.
本文针对混凝土普通搅拌的局限性,对振动拌和过程进行了理论分析,将振动强化拌和技术用于SFRC的制备。
Owing to the limitation of traditional con-crete mixing, vibratory mixing technology is used to make SFRC on the basis of theoretical analysis of vibra-tory mixing.
振动设备具有广泛的用途。本文就对振动设备的要求与设计程序作了介绍;重点介绍了设备重心和参振质量的计算。
Requirements and design programmes of the widely used vibrating equipment have been introduced with emphasis on calculation of center of gravity and mass being vibrated of such equipment.
振动设备具有广泛的用途。本文就对振动设备的要求与设计程序作了介绍;重点介绍了设备重心和参振质量的计算。
Requirements and design programmes of the widely used vibrating equipment have been introduced with emphasis on calculation of center of gravity and mass being vibrated of such equipment.
应用推荐