• 内饰方面,大部分房间保留了原有的宽板地板和上下各有六个窗格的高窗。

    The interior has the original wide-plank floors and tall six-over-six windows in most rooms.

    youdao

  • 采用宽板小成型角生产小口径螺旋缝埋弧焊钢管时,内焊缝产生裂纹是经常遇到的问题。

    Inside weld produced cracks are often faced problem by adopting wide coil with small forming Angle to produce small size spiral submerged welded pipe.

    youdao

  • 本实用新型的自动切割式预应力混凝土空心制品挤压机,包括窄板挤压机和宽板挤压机。

    The utility model discloses an auto-cutting type extruder for hollow concrete products, which comprises a narrow plate extruder and a wide plate extruder.

    youdao

  • 在此基础上对高刚度宽板轧机工作辊的热行为进行了分析,为研究工作辊的热变形提供了依据。

    Moreover, the thermal behavior of work roller of high stiff wide plate mill was analyzed, the study provide the foundation for researching the thermal deformation of the work roller.

    youdao

  • 原有的建筑细节,包括宽板松木地板、装饰嵌线和镶板随处可见。

    Original architectural details include wide-plank pine floors, molding and wall paneling throughout.

    youdao

  • 直到本世纪初,才开始批量生产宽板高强钢,这样,使用国产高强钢制造大型球罐已成为可能。

    Till the beginning of this century, broad board with high strength steel is produced in large quantities, which makes it possible to manufacture large spherical tank with domestic high strength steel.

    youdao

  • 在此基础上对高刚度宽板轧机工作辊的热行为进行了分析,为研究工作辊的热变形提供了依据。

    Moreover, the thermal behavior of work roller of high stiff wide plate mill was analyzed, the study provide the foundation for researching the thermal deformation of the...

    youdao

  • 根据宽板弯曲过程中的变形与应力分布特征,提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似求解方法。

    A new approximate solution to figuring out thickness reduction in bending sheets is presented in views of the characteristics of deformation and stress distribution.

    youdao

  • 根据宽板弯曲过程中的变形与应力分布特征,提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似求解方法。

    A new approximate solution to thickness reduction of bending sheet is presented by considering the characteristics of deformation and stress distribution.

    youdao

  • 对宽板弯曲变形过程进行分析,提出了弯曲过程中板坯外表面半径,板料厚度和变薄系数随板坯内表面半径变化的理论解,并与查表法和近似解作了比较。

    By analyzing the wide sheet bending, the variations of theoretic radius values of outer surface, sheet thickness and thinned coefficient with radius of inner surface in bending were put forward.

    youdao

  • 用两次锁存法可巧妙地提取有孔洞缺陷时的板宽值。

    The value of width can be acquired ingeniously by using duplex latch mode while there is a hole defect in the steel plate.

    youdao

  • 本文根据现场不同板宽、不同轧制条件情况,实测了轧制压力等工艺参数。

    According to different plate width and rolling condition, process parameter such as rolling pressure are measured.

    youdao

  • 随着板宽的增加,前张应力沿横向的差距先减小后增大。

    With the increasing of strip width, the transverse difference of front tension stress decreases firstly, and then increases.

    youdao

  • 提出一种新型线性变凸度工作辊辊型即lvc辊型,这种辊型实现了辊缝凸度调节与板宽成线性化。

    A new work roll contour is advanced which is a linear variable crown (LVC) roll. This roll contour can realize linear ratio of gap crown and strip width.

    youdao

  • 分析表明,辊型曲线最大凸度值与板宽变化相关。

    The analyzed results indicate that the maximum plate crown value of roll shape curve is related with plate width variation.

    youdao

  • 给出四边简支任意厚宽比的矩形板在任意荷载下的精确解。

    The exact solutions for a simply supported rectangular thick plate with arbitrary ratio between thickness and width under any given loads are presented.

    youdao

  • 电流调节范围宽,可适合多种板厚的焊接。

    With wide range to adjust current, it can weld plates with various thickness.

    youdao

  • 结果表明:在开孔尺寸一定的情况下,随着板宽的增大,开孔损伤板的应力集中因数减小;

    The stress concentration factor (SCF) decreased with the increase of the width of plates when the hole diameter was definite.

    youdao

  • 板材直流电阻对焊过程中,对接端面沿板宽方向的温度分布对焊接接头的质量有很大的影响。

    In the process of DC upset butt welding, the joint quality was strongly effected by the temperature distribution in the direction of the plate width.

    youdao

  • 蛇口招商购物中心工程采用了宽扁梁-大跨度板的体系。

    The Shekou Mechants shopping center project embodies the application of the flat beam wide span plank.

    youdao

  • 给出四边简支任意厚宽比的矩形板在任意荷载作用下的控制方程及其精确解。

    The governing equations as well as their exact solutions are constructed for a simply supported rectangular orthotropic plate with arbitrary thickness subjected to arbitrary Loads.

    youdao

  • 整体式桥台的等代桩长、桥台纵向抗弯刚度、宽跨比及箱梁肋板间距等,是影响该类桥梁剪滞系数的主要因素。

    It is proved that the main affecting factors include: equivalent pile length, bending stiffness of abutment, ratio of width to span, distance of webs, etc.

    youdao

  • 与孔板流量计相比,具有结构简单,安装、维护方便,测量范围宽等特点。

    Comparing with orifice flowmeter, it features simple structure, ease installation and maintenance as well as wide range.

    youdao

  • 结果表明:板型不均的宽铜带尺寸中间厚,两边薄。

    The results show that the uneven defects are thick in the middle and thin in the both sides.

    youdao

  • 厚度控制系统特别是AGC系统对中厚板板形的开环控制有一定影响,特别是刚度偏小的轧机在轧制宽薄中厚板时容易出现边浪。

    The gauge control system especial AGC system can deteriorate open loop control of plate shape especially when the mill rigidity is small, making edge wave of rolling plate.

    youdao

  • 研究了铝及铝合金板带材经带有较大前后张力的四重高速不可逆冷轧机轧制后产生宽减的现象。

    This article mainly studies the phenomenon of width reducing of aluminium and aluminium alloy material which is rolled by 4-high non-reverse cold rolling mill with more forward and backward tension.

    youdao

  • 研究了铝及铝合金板带材经带有较大前后张力的四重高速不可逆冷轧机轧制后产生宽减的现象。

    This article mainly studies the phenomenon of width reducing of aluminium and aluminium alloy material which is rolled by 4-high non-reverse cold rolling mill with more forward and backward tension.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定