基于概念证明(Proof - of - Concept,poc)的方法：采用这种方法时，用于实验和模拟的原型是开发过程生成的工件。
Proof-of-Concept (PoC) based methods: This is when prototypes used for experiments and simulations are the artifacts that result from the development process.
整个实验过程可同时在计算机上和模拟实验板上直观的展现出来。
The whole experimental process can be displayed in both computer and the simulation experiment interface at the same time.
本文对浮法玻璃拉边过程进行了数值模拟和实验研究。
In the thesis, we carried through numerical simulation and experimental study of the stretching process of float glass.
利用热模拟压缩变形实验研究了Q 235碳素钢多道次热变形及后续处理过程的组织演变规律。
The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
该软件涉及结构化学中抽象概念和过程的动画演示，图形绘制，仪器和实验模拟等方面。
The software deal with the animate demonstration of abstract concept and process, protracting image, simulating of apparatus and experiment, and so on.
方法采用拓能系统的固定装置、计划系统、激光灯、弓形尺、头部模型（简称头模）模拟3DCRT的实施过程进行质量控制分组实验。
Methods To do quality control experiments to simulate the process of 3D-CRT by means of Topsland system, radiation treatment -planning system, laser light, bow form ruler, head model.
对船舶钢板激光弯曲成形过程进行了数值模拟及实验研究。
Computer simulation and experimental investigation of laser forming process of shipbuilding sheet metal were performed.
利用蒙特卡罗方法模拟中子在导管中输运过程，在中子导管的设计和实验应用中可发挥重要作用。
In the design and application of neutron guides, it is very important to simulate neutrons transmission by Monte-Carlo method.
犬自体肺叶移植实验可用于模拟临床肺叶移植的过程，并可为临床开展肺叶移植提供参考依据。
The canine lobar lung autotransplantation experiment can be used to simulate the process of clinical lobar lung transplantation.
利用该模型对电热化学发射内弹道过程进行了数值模拟，并将模拟结果与实验数据进行了分析比较，结果表明模拟结果与实验数据基本吻合。
The launching process in interior ballistics is numerically simulated, the comparison of simulation results with experimental ones indicates that the simulation agreed well with the experiments.
同时为了为算法设计提供良好的实验平台，本文将设计工业过程实时模拟平台作为另外一项重要的研究工作。
Otherwise, in order to provide a effective simulation platform for control algorithm, this paper make the design of a real-time industry process simulation platform as another content.
采用热交换法生长蓝宝石晶体，通过数值模拟与实验研究了晶体生长过程中热交换器中氦气流量对温场的影响。
The influence of the helium flux on the thermal field of sapphire crystal growth by heat exchange method(HEM) was studied by heat exchange method simulation and experiments.
在线模拟实验表明，只要被跟踪的过程是平稳的，且具有有理谱密度，那么这种算法就是收敛的。
On-line simulation is performed and the result showed that the algorithm converges provided that the process under study is stationable and has rational spectral density.
采用烧结的平面物理模型，实验模拟底水绕过上窜夹层的动态过程。
The dynamic process of bottom-water bypassing interbed and fleeing upward is simulated by using sintered planner models.
计算机模拟实验和对瓷砖破裂过程的实际测量验证了此种方法的正确性。
Computer simulation experiment and glazed tile rupture experiment proves the feasibility of this method.
建立了过程的热质传递模型，比较模拟数据与实验数据，验证了理论模型有较好的适用性。
A heat and mass transfer model was set up, and the simulation results were found to be in accordance with the experimental data.
采用实验模拟和理论分析的方法证明了煤矿井巷火灾过程中同样存在回燃现象。
The simulation experiment and theoretical analysis show that backdraft is able to break out in the underground roadway network fire.
在对固体燃料冲压发动机(SFRJ)的研究中，建立合适的数学模型对其内部工作过程进行模拟是SFRJ设计和实验的重要环节。
During the research on solid fuel ramjet (SFRJ), it is an important link for the design and experiment of SFRJ that a suitable mathematical model is built to simulate its internal work process.
另外，提出了采用动网格技术与实验手段来模拟和研究实际清管过程的设想。
Besides, it also puts forward an assumption adopting grid technology and experiment to simulate and analyze the actual pipeline clearing process.
实验数据的准确、可靠的模型关联是对过程进行有效模拟和设计的基础。
Realistic modeling and accurate correlation of experimental data are essential to sound process simulation and design.
针对伊斯曼有机废水治理实例，给出了模拟计算与实验分析相结合进行过程设计的具体思路。
Using Eastman waste water treatment case, this paper presents the detailed scheme to combine simulations with experiments for process design.
结论：新化合物结构鉴定为芍药苷4乙基醚，并通过模拟实验证明可能为提取过程中产生的人工产物。
Conclusion: the new compound was identified as paeoniflorin-4-ethyl ether, which may be an artifact produced during extraction proved by simulate experiment.
由于是一个典型的力伺服系统，而且在仿真实验过程中需要模拟各种载荷的变化情况，电液伺服加载系统是一个相当复杂的机—电—液复合系统。
As a typical servo system for simulating various loads in the experiment, the electro-hydraulic loading system is quite a complex machine-electricity-hydraulic multiple system.
结果表明本模型对二氧化碳溶解度的计算精度与实验的测定精度相当，可用于过程的模拟计算。
It is shown that the EOS model can reproduce the experiment data within the measurement accuracy, hence it can be used for the process simulation.
主要包括模拟原理、重要的模拟输入参数的提取、模拟过程和模拟结果和与实验结果的对比。
Also presented are the principle of the simulation, the extraction of important imput parameters, processes and results of the simulation and the comparison with experiment.
在本课题的研究过程中，在实验室建立了一个模拟实际工业现场的图象定位实验系统。
During this research, in the lab we build up the experimental system of image detecting which simulate the condition of the practical field.
结论实验结果表明该模型能较好地模拟临床电损伤过程，为高压电损伤的实验研究创造条件。
Conclusion the results of experiment show the model can simulate the process of electrical burns and it can creat some better conditions for experimental study to electrical burns.
利用含有甘油三油酸酯的半透膜装置进行室内模拟实验和野外验证实验，旨在开发一种可以模拟生物过程的监测地下水的方法。
The paper presents the simulation experiment using semi-permeable sampling device(SPMD) with triolein in order to develop a method to monitor groundwater by simulating bio-accumulation process.
利用含有甘油三油酸酯的半透膜装置进行室内模拟实验和野外验证实验，旨在开发一种可以模拟生物过程的监测地下水的方法。
The paper presents the simulation experiment using semi-permeable sampling device(SPMD) with triolein in order to develop a method to monitor groundwater by simulating bio-accumulation process.
应用推荐