每一次重复都使模型结构与实验结果更加吻合。当这两者之间的差异可以忽略时，这一衍射图形便得到求解。
Each round of iteration brings the model structure into better agreement with the experimental data; when the difference between the two is negligible the diffraction pattern is said to be "solved."
专家说，肥胖的灵长类动物可以作为有用的模型，相比实验室的小白鼠，无论在生理结构上还是摄食习性上，它们同人类都更为近似。
The corpulent primates serve as useful models, experts say, because they resemble humans much more than laboratory rats do, not only physiologically but in some of their feeding habits.
根据对工艺和实验数据的分析及预测目标等条件，确定了模型的结构。
The model structure was designed based on the analysis of technology and experiment data as well as forecast target.
“全景地图显示其结构和能量谱线根本和所有的预测模型完全不一样，”新墨西哥州阿拉莫斯国家实验室的项目论文合著者赫伯特·福斯滕（HerbertFunsten）说道。
“Our maps show structure and energy spectra that are completely different from what any model has predicted,” says study co-author Herbert Funsten of the Los Alamos National Laboratory in New Mexico.
通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。
An experiment method was used to identify ARX model of the system, based on which the predictive controller was obtained to control vibration of a cantilever beam.
本文利用有限元方法计算分析了锻压机架的结构应力，并用模型实验检验了有限元计算的正确性。
This paper analyzes the structural stress of a forge press by finite element method, and tests and verifies its correctness by the model experiment.
通过水力学模型实验，研究了不同结构的湍流控制装置对中间包流体流动特性的影响。
The influence of turbulence inhibitors with different structure on fluid flow behavior in tundish was studied by water modeling experiments.
将这种方法应用到具体的非晶相绝缘体中，以材料的实际结构来构造双势垒模型，得到的结果与实验相吻合。
When it is applied to amorphous insulating materials with double well potential model being constructed based on real structure, simulation results are in accord with experiments.
研究了扩展拉格朗日方法的人工神经网络模型，实现了其电路结构，并进行了仿真实验。
We have investigated artificial neural network models based on an augmented Lagrange method, and accomplished the circuit structure and the simulation experiments.
采用优化后的结构参数制造了ISOGRID板结构物理模型，并进行了动态实验。
A prototype of optimized ISOGRID steel panel is manufactured, its dynamic characteristics experiment is successfully carried out.
介绍凸轮轮廓磨削加工的数学模型及研制的数控凸轮轴磨床的机械结构，进行加工实验并讨论凸轮轴磨削的工艺参数。
Describes the math model of grinding camshaft, the mechanical structure of the CNC camshaft grinding machine ourselves and the experiment, then discusses the machining technics.
其中实验模型是从含有两组主结构面的岩体中抽象出来的。
The experimental model is abstractly established from the rock mass with two groups of main constructional surfaces.
本文将理论、软件工具和实验有机结合起来，建立了合适、正确的这种特殊结构的有限元模型。
This paper integrated the theory, software with the experiment and established a reasonable, proper FEA model.
通过计算机实验，讨论样本、学习算法和网络结构等对神经网络预测模型性能的影响及其改进措施。
Through computer simulation, samples, BP algorithms and the influence of network structure neurula on model performance have been discussed as well as the improving measures.
分析实验获取的霜层显微图像，为建立霜层结构模型提供基础。
The amplificatory image of frost layer is analyzed for founding frost structure model.
本文通过吊桥模型实验研究在传统型式吊桥上增设斜拉索后对结构在外荷载作用下的刚度的影响。
Based on the model test, in this paper, the stiffening-effect of inclined cable installed in the suspension bridge of traditional type is studied.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
通过水力学模型实验，在不同水口结构和不同工艺参数的条件下对异型坯进行结晶器流场对比。
Using water model, the flowing distributions based on the different SEN structures and technological parameters in beam blank mould are studied in this paper.
本文通过模型实验和有限差分法电算，对桥跨结构主梁剪力横向分布进行了研究。
In this paper, the shear transverse distribution on the beams of bridge is researched using data of model tests and computation in the finite difference method.
对圆桶式结构和圆盘式结构的传递力矩和功率损失比较分析，确定了实验模型的结构尺寸。
The structure dimension of examination model was ensured through contrast and analysis the transferring moment and power loss between drum structure and disk structure.
本文运用结构原理法建立了陶瓷泥浆的触变模型，并通过实验对所建立的模型进行了验证。
In this paper the thixotropy model of ceramic slip is established by the use of structure principle method and it is tested by experiments.
进行了ACY - 2型地下铲运机整机结构强度实验，验证了整机有限元模型的正确性。
Tests were made on the strength of ACY-2 LHD machine's bodywork structure, which validated the correctness of the FE model.
实验证明，该模型结构简单、精确可靠、具有实用价值。
The experiment shows that the mathematical model is of simple structure and capable of providing accurate and consistent data, being valuable in application.
该文使用主流网络仿真工具NS 2对教学实验网络建立了仿真模型，讨论了网络拓扑结构和仿真参数的选取方法。
Authors use the mainstream network simulation tool NS2 in teaching network, set up a simulation model to discuss the network topology and the method of simulation parameters selection.
对结构模型实验中的模型方法进行了研究，并对非相似模型的设计理论作了初步探索。
The paper analyses the modeling approach in the structural modeling experiments and explores essentially the designing theory in non similarity models.
从理论和实验两方面研究了基于行波模型的结构梁响应控制方法。
An active control method based on a flexural propagating wave model for a long and thin beam with a piezoceramic actuator is investigated both analytically and experimentally.
在此基础上，根据已有的结构破坏实验及结构破坏实例，提出了具有一定典型性的结构破坏模型。
On this basis, the basis of the structural damage and destroying the structure of an example, the proposed structure has certain typical damage model.
在此基础上，根据已有的结构破坏实验及结构破坏实例，提出了具有一定典型性的结构破坏模型。
On this basis, the basis of the structural damage and destroying the structure of an example, the proposed structure has certain typical damage model.
应用推荐