通过实验及结果分析，讨论了影响结晶三氯化铝催化合成乙酸异戊酯反应的因素。
Through the experiments and result analysis, this paper discusses the factors influencing the catalytic synthesis of isoamyl acetate with the crystal aluminum chloride as the catalyst.
将粗糙集与决策树结合，提出一个基于RS - DT的邮件分类方案与模型，并进行了实验及结果分析。
Combining rough sets with decision tree, a spam filtering solution based on rough sets and decision tree (RS-DT) was proposed.
实验及结果分析表明，基于中值滤波和多向梯度搜索目标检测算法能实时有效地检测出复杂天空背景下的红外弱小目标。
The results of some physical experiments showed that this method can detect the weak and small infrared target under complex background effectively in real time.
通过实验及结果分析，显示加权后DVDM和IVDM算法的故障分类准确度增长10%以上，说明该理论算法具有较高的可靠性和准确度。
In the experiment, the fault classification accuracy of the weighted algorithm of DVDM and IVDM increase more than 10 percent. It shows this theory has upper reliability and precision.
文中给出了详细的理论分析和计算方法及部分实验结果。
Theoretical analysis and calculation method are given in detail, and part of experimental results are presented.
理论分析及实验结果表明了该算法的可行性与有效性。
Theoretical analyses and experimental results show that the algorithm is feasible and effective.
对通电线圈的电流及环境温度进行测量的实验结果与理论分析相吻合。
The experimental results of measuring the current of a coil and the environmental temperature agree well with the theory.
根据实验结果，提出了利用看谱镜对钛合金中的锡、铁元素进行光谱分析及牌号鉴别的方法。
Based on experimental results, spectroscopic methods are presented for analyzing spectra of Sn and fe in Ti-based alloys and for identifying different kinds of Ti-based alloys.
实验结果及分析表明了该去噪模型的有效性。
Experimental results and analysis are given to demonstrate the validity and effectiveness of the proposed model.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with documents.
最后利用燃料可燃界限图进行了实验结果的定性验证及分析。
At last the experimental results are qualitatively validated and analyzed based on flammability diagram of fuel.
实验结果及分析表明了该方法的有效性。
Experimental results and analysis are given to demonstrate the validity and effectiveness of the proposed method.
该实验结果为扁挤压筒的强度计算及结构设计提供了参考依据，也与数值分析解起到相互佐证的作用。
The results may not only be adopted for structure design and strength evaluation of the container, but also collated with the values from the numerical calculation.
掌管化学、力学、焊接实验室，负责日常试验结果的正确性、准确性，对异常结果的分析及日常行政管理。
In charge of Chemical, Mechanical and welding Lab, take the responsibilities of the accuracy of testing data, root cause analysis, administration management.
系统性能分析及仿真实验结果表明该控制器对带有随机扰动的时滞系统具有良好的控制性能。
The system performance analyses and simulating experiment results show that the controller has good control performance to the time - delay systems with random disturbances.
实验用氮气以不同的驱替速度和驱替压差驱替岩心，得到由速敏性引起的渗透率损害及相关分析结果。
Nitrogen gas with different displacing velocity and pressure was used to displace the core in testing, the permeability damage and correlation analysis caused by velocity sensitivity were obtained.
给出电路接口方式、测量误差分析及实验结果曲线，液滴体积随液滴生长过程呈现良好线性关系。
Interface circuits, error analysis and experimental result graphs are presented. Excellent linearity between the drop volume and drop growth is achieved.
摘要介绍了钛螺纹槽管传热及流动阻力的实验结果，并对结果进行了分析。
The results of experimental investigation on heat transfer and fluid pressure drop of spirally fluted titanium-tubes for steam condensation are reported and analyzed.
结果通过分析相关数据如et、NO等的变化，及运用相关统计学方法等得出实验结果。
Results We analysed the variation of data, like et, NO, and used relative statistical method.
通过分析计算及实验，结果表明，大模数大直径内啮合齿轮的这种精确成形方法比其它方法要好。
By analyzing, calculating and experimenting, it is shown that this precise shaping method of large module and large diameter internal meshing gear is better than any other methods.
通过理论分析及实验结果证明，这种传感器完全可以满足实际应用要求。
The theoretical analysis and practical experiment show that this transducer is able to satisfy the requirements of application.
对实验装置及图象分析方法加以叙述，并附上一些实验结果及数据处理结果。
The descriptions of the experimental apparatus, the image processing method and their results are also presented.
实验对象的选取、实验的时间和方法、实验结果分析及评价、问题与思考。
Thirdly, the author introduces the course of the empirical research, such as the experimental objects, the methods, the time, the results and the analyses, the problems and reflections.
本文介绍了利用铜电阻温度特性设计与组装铜电阻温度计的原理及方法，并对实验结果进行了分析讨论。
The principle and approach of designing and assembling copper resistance thermometer based on its characteristics is presented in this paper. The experimental result is analyzed and discussed.
方法对经病理证实的40例漏、误诊肺癌患者的临床特点及实验室检查结果进行总结，分析漏、误诊原因。
Methods To summarize the clinical manifestations and auxiliary examination of 40 cases with lung cancer who were misdiagnosed, to analyze the reason of misdiagnosis.
第五部分描述了为期一学期的实验研究过程，及对实验结果的分析与讨论、反思与建议。
The last part describes the process of the research and the discussion and analysis of the experimental result.
理论分析及实验结果证明，本方法中可能存在的系统误差实际上小到可以忽略。
Experiments and analyses have shown that possible errors arising from the system are negligibly small.
根据实验结果及分析，对垂直立管的管形设计和催化剂在垂直立管中的密相输送提出了分析与建议。
Based on the experimental results and analysis, the idea and principle about design of standpipe shape and dense-phase transportation of catalyst in the standpipe were presented.
根据实验结果及分析，对垂直立管的管形设计和催化剂在垂直立管中的密相输送提出了分析与建议。
Based on the experimental results and analysis, the idea and principle about design of standpipe shape and dense-phase transportation of catalyst in the standpipe were presented.
应用推荐