数控加工；曲线；宏程序；
宏程序在数控编程中有着广泛的应用。
Macro-program has wide applications in numerical control programming.
介绍了宏程序的特点、编制及其模块化形式。
The characteristics, programming and modular form of macro programs are introduced.
采用会话编程的方式，生成数控加工零件的宏程序。
Using dialogue programming conducts the NC parts macro programs.
介绍了FANUC数控系统宏程序的特点和应用范围。
This paper introduces characteristics and range of application FANUC CNC system macro programs.
使用宏程序和子程序编程，可以减少数控编程者的重复劳动。
It can reduce repetitive labor of NC coder using macro-program and subprogram.
文章介绍掌握宏程序的编程原理，及宏程序在CNC加工中的应用。
The principle of grand procedure programming, and its application to CNC processing are introduced.
通过对华中数控系统宏程序充分发掘，顺利实现了内半球的铣削加工。
Make full use of macro programming of Hua-zhong's numerical control system, favourably finshmilling inside hemisphere.
通过实例介绍了数控铣削加工中宏程序的编程方法和编程中应注意的问题。
This paper introduced the programming method of macro program and some problems needing attention in NC milling combined with cases.
还有应用半径补偿功能结合宏程序来实现任意的内、外轮廓的倒角、倒圆角。
Furthermore, with the function of cutter radius compensation and macro processor to process edge blend and edge chamfer of any outside and inside profile.
采用铣削加工的方式进行英制螺纹加工，宏程序的应用提高了螺纹铣削的效率。
Way by milling Inch thread processing and the application of macro program improve the efficiency of thread milling.
数控宏程序设计作为一种非常方便实用的编程方法应给予足够的重视并加以推广。
As a very convenient and practical programme method, macro program design should be given sufficient attention and promotion.
通过实例介绍数控铣削加工编程中常用的子程序、宏程序、代码段调用等方面的内容。
Applications of common subprograms, macroprograms and code transferring in numerical control milling programming are exemplified in this article.
通过对华中数控系统中宏程序的发掘利用，顺利在经济数控铣床上实现了外半球的加工。
Based on the macro program of Hua-zhong NC system, it designs the milling NC program for outside hemisphere.
从四弧逼近法和宏程序编程方法两方面对数控车削椭圆曲线的精加工和粗加工进行了探讨。
Finishing machining and rough machining for numeric control turning ellipse curve are investigated through four arc approximation method and the macro program method.
介绍了数控系统中图形辅助编程和宏程序编程两种编程方法，并给出了宏程序的语法分析过程。
The paper introduces graphs aided programming and macro programming in NC system, and then presents the syntax analysis process of macro program.
目的实例介绍倾向评分法的基本原理和适用条件，设计适用于分析二分类资料的SAS宏程序。
Objective Through introduction of principal theory and algorithm of propensity score to design SAS macro programs for binary data.
刀具补偿功能是数控机床所特有的重要功能，用户宏程序是用户提高数控机床性能的特殊功能。
Cutter compensation is the special important function of nc machine, and user macro program is used to improve the capability of nc machine.
通过对用户宏程序的划分，对适于宏程序编程的典型零件的图形、参数及工艺文件进行详细描述。
Through the dividing of user macros, the article describes in details the typical parts graphics, parameters and process documents suitable for macro programming.
中高档数控机床一般都提供用户宏程序功能，正确恰当地使用宏程序，可以极大地提高编程效率。
The advanced CNC system generally provides macro programming function, which is available to improve the process programming efficiency.
本文介绍通过采用系统自带的宏程序，来测试GSK980TA数控系统输入输出口的简单方法。
A simple method which is used to test the CNC system GSK980TA I/O interface with the system self-taking macro program is introduced.
在数控技能大赛中轮廓倒角和倒圆角的宏程序编制方法有两种：刀具中心轨迹编程和刀具半径补偿编程。
It describes the process of filleting contour in programming with the tool center track and tool radius compenstration.
经过实例验证，使用本文设计的宏指令系统编制而成的宏程序，完全可以在开放式数控系统上正确运行。
After example validating, the macro program wrote with macro instruction system designed in this dissertation can run well in open NC system.
采用三轴联动机床进行加工螺纹，改变了螺纹的加工工艺方法，并利用宏程序编程，取得了良好的效果。
Used the three axle linkage engine bed to carry on the processing, changed the thread processing technique and using the great procedure programming, and has obtained the good effect.
本文讨论了数控加工宏程序编制的注意事项，介绍了利用宏程序进行复杂非圆曲线柱面数控加工的程序编制实例。
This paper introduces numerical control programming and how to use macro program to make numerical processing of complex the out of round curve cylinder.
本文利用FANUC及SIEMENS数控系统的宏指令功能，设计了编程零点变换宏程序和零件成组加工宏程序。
In this paper macroinstructions of FANUC and SIEMENS NC systems are employed to design macroprograms of programming zero transforming and group machining of workpiece.
鉴于两者的优越性，提出一种新的编程方法，将图形编程和宏编程相结合，用图形化的方法形成对宏程序的调用指令。
Considering the advantages of the two ways, a new approach is proposed which combines them with each other by using graphs to form macro-call instruction.
通过研究球形空间曲面设计的算法及加工路径生成策略，利用宏程序编制出具有通用性、适用性且应用简单的球形空间曲面的加工程序。
By research on algorithm and strategy of route's making in the spherical surface design, the authors introduce a NC macro program which is applicable and simple.
介绍了米制梯形螺纹车削加工用户宏程序的编制和简单调用的方法，对提高数控机床的使用性能有很大的帮助，对其它非标螺纹的编程也具有一定的借鉴意义。
To improve the performance of NC machine tool, the paper introduces the method of custom macro programming technique and simple call on transfer process of the metric system ACME screw thread.
介绍了米制梯形螺纹车削加工用户宏程序的编制和简单调用的方法，对提高数控机床的使用性能有很大的帮助，对其它非标螺纹的编程也具有一定的借鉴意义。
To improve the performance of NC machine tool, the paper introduces the method of custom macro programming technique and simple call on transfer process of the metric system ACME screw thread.
应用推荐