玻璃纤维芯有两种基本的类型:多模光纤,用于10km以下的距离;单模光纤,用于更长的距离。
The glass fiber core comes in one of two basic types: multimode fiber for distances up to 10km and single-mode fiber for longer distances.
还有许多公司在主干网中结合安装单模和多模光纤。
Many companies also are installing a combination of singlemode and multimode fiber in backbones.
缠绕技术通常被用于大模场面积多模光纤激光器的横模控制。
Coiling technique is used to control the transverse mode of a large-mode-area (LMA) multimode fiber laser.
并且应用了多模光纤传感器和FBG传感器,使测试结果更可靠。
Because multimode fiber sensors and FBG sensors are simultaneously used in the system, the result of measurement is more reliable.
光学纤维。第2-30部分:产品规范.A3类多模光纤分规范。
Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres.
本文阐述了一种新的两芯多模光纤旋转接头的设计原理及实验结果。
This paper describes the structure designing and the experiment result of a new duplex multi mode fiber rotary joint.
今天,许多建筑网络在楼宇主干网和园区主干网部分使用多模光纤安装。
Today, most premises networks are installed with multimode fiber in the building backbone and campus backbone segments.
光学纤维。第2 - 20部分:产品规范。A 2类多模光纤分规范。
Optical fibres - Part 2-20: product specifications - Sectional specification for category A2 multimode fibres.
介绍了通过在多模光纤中引入周期性的扰动以改善多模光纤的传输特性。
In this paper, the transmitting characteristic of multimode fiber is improved by introducing the periodic scramble during the fiber's drawing process.
采用该系统成功地检测了多模光纤端面和一个条形光波导端面的模场分布。
The mode distributions at the end of a multi-mode fiber and a channel waveguide were successfully imaged by the system.
本文研究了利用多模光纤中因微弯引起的强度调制,作为换能机构来检测周围环境的变化。
Intensing modulation by microbending in multimode fiber is considered as a transduction, mechanism for detecting environmental changes.
导出了一种用系统10%—90%上升时间所表示的最坏情况下多模光纤色散功率代价的计算方法。
An approach for the calculation of the worst-case dispersion penalty of multimode fiber links was derived. The approach is expressed by 10%-90% rise time of the system.
提出一种车窗防夹的多模光纤传感系统,该系统安装在车窗框内,并基于斑纹图样的变化来获得信号。
A multi-mode optical fiber sensor system is proposed, which is installed in the window frame and whose sensor signals are based on variation of a speckle pattern.
利用两根多模光纤束传输光信号,采用一种特殊的结构形式,能够有效地消除力偏心对传感器输出的影响。
Two beams of multi-fibers are used to transmit optical signals, and one particular structure is adopted to effectively eliminate the effect of eccentric force on the sensor output.
为研究两者之间的关系,在光纤不同弯曲直径下,对多模光纤激光器的输出性能进行了实验测量和理论计算。
To study the relationship, the output capability of multimode fiber laser is measured under various bending diameters, and it also be calculated theoretically.
实验测量了多模光纤激光器在不同缠绕半径下的输出性能,并理论计算了各阶模式在不同缠绕半径下的损耗特性。
During the experiment, as the coil radius of multimode fiber changes, output characteristic of the laser has been measured. Meanwhile, the mode loss of different modes is calculated theoretically.
从理论和实验上研究了不同焦距下泵浦能量以及透镜与光纤间距对多模光纤中的SBS能量反射率和脉冲波形的影响。
The influences of pump energy, focal length and distance between fiber and lens on SBS reflectivity and waveform in multimode fiber are investigated theoretically and experimentally.
在综合大量实例的基础上,提出双高斯函数逼近多模光纤的光脉冲输出的解析近似方法,使时域法确定光纤带宽的精度大为提高。
On the base of a plenty of facts we suggested a method in which bi-Gaussian form is approached the output pulse in multimode fibers The accuracy measuring band in time domain can be improved highly.
自聚焦透镜与多模光纤的折射率分布都遵从平方律分布,基于这个事实,进行了以多模光纤生产工艺制造微型准直透镜的研究和设计。
Based on this fact, the research and design of micro align lens which is fabricated by means of multimode fiber fabrication techniques is carried out.
对EOPCB的耦合接口方案进行了研究,针对直波导与多模光纤的耦合损耗进行了计算研究,为在实验过程中的具体操作提供了理论依据。
Then we will analyze the coupling blue print of EOPCB, and compute the loss of fiber coupling with optical waveguide, it will be useful in experimentation.
提出一种新型多模光纤扭转传感器的基本原理和传感结构,推导了扭角传感的理论公式,该传感器的扭角与多模光纤的功率损耗呈线性关系。
The theoretical formulas of torsional Angle sensing are derived and the torsional Angle of this sensor is linear to the power loss of the multi-mode fiber.
采用模场耦合理论,推导出多模光纤与单模光纤的直接耦合效率表达式,计算得到耦合效率与所选用的多模光纤和单模光纤的纤芯芯径之间的模拟关系。
Based on mode field coupling theory, a model to calculate the butt-joint coupling efficiency between a multi-mode fiber and a single-mode fiber is presented.
利用傅里叶变换和耦合模理论得到了取样布拉格光纤光栅的谐振方程,确定了其多谐振峰的位置。
The resonance equation of the sampled fiber Bragg gratings is derived through the Fourier′s transform and the coupled-mode theory, which determine the wavelengths of the resonance peaks.
研究了偏心激励多模聚合物光纤横截面的光功率分布。
Numerical and experimental studies of cross sectional optical power distribution (OPD) in polymer optical fiber under offset launch are given.
通过控制拉锥后的末端光纤尺寸,实现了多模光束输入转换成单模光束输出。
By controlling the taper end size of the fiber, the unique tapered fiber can convert a multi-mode beam into a single-mode one.
通过控制拉锥后的末端光纤尺寸,实现了多模光束输入转换成单模光束输出。
By controlling the taper end size of the fiber, the unique tapered fiber can convert a multi-mode beam into a single-mode one.
应用推荐