在泄爆膜的右侧设有多孔板,该多孔板固定在除尘器的箱体板上。
A porous sheet is provided at the right side of the explode-discharging film, the porous sheet is fixed on the box plate of the dust remover.
结论采用粉末烧结技术研制的多孔板的特性满足水升华器的性能要求。
Conclusion Porous plates developed by making use of sintered powder technology could meet requirements of performance of water sublimator.
对舱外航天服热控系统所采用的多孔板水升华器的主要工作模式进行了讨论。
Some operation modes of the porous plate water sublimator used in an EVA space suit thermal control system are discussed.
本文介绍了采用石灰、粉砂为主要原材料生产灰砂预应力多孔板构件的最新研究成果。
In this paper the results of recent investigation on prestressed lime-sand concrete hollow panel with lime and powdery sand are given.
本文介绍多孔板支撑缩放管的管壳式换热器在硫酸生产中的应用效果,设备制造和保温经验。
The orifice-baffle support type heat exchanger(OSHE)supports tube bundle with circular orifice-baffles instead of conventional segmental baffles.
特别地,它们被很好地配置成在多孔板分析形式下进行自动取样、样品准备和分析。
They are particularly well suited for conducting automated sampling, sample preparation, and analysis in a multi-well plate assay format.
目的探讨水升华器的关键部件—多孔板的研制方法,并对多孔板的主要物理特性参数进行研究。
Objective To investigate the development method of porous plate, the key part of water sublimator, and its main physical characteristics.
建立了泡沫多孔板的传热模型和能量方程,同时求得了板内烟气温度分布及辐射热流强度变化。
Heat transfer model and energy equations for porous plaque have been established, temperature distribution and variation of radiative heat flux are also found.
试验结果证明文中提出的升华器基本的设计概念是可行的,粉末烧结多孔板可以满足升华器的试验要求。
Test results have proved that the basic design concept of sublimator is feasible and that sintered powder porous plates can meet experimental needs of sublimator.
采用松装烧结技术在不同条件下制备出多孔钛板。
The porous titanium plates were prepared by loose powder sintering technology.
率定试验结果表明,多孔砂浆块比高进气值陶土板更适宜于作为裂隙非饱和渗流试验和驱替试验中的毛细隔栅。
The calibration test results show that porous mortar is more appropriate than ceramic plate when used as capillary barrier in unsaturated seepage experiment and displacement experiment of fracture.
多孔陶瓷透气分布板是一种新型的材料。
Ventilating dispersion plates of porous ceramics is a new kind of material.
将柔性印刷电路(4)固定在固定板(6)上的胶粘剂片(5)在其多孔基材的至少一侧具有压敏胶粘剂层。
The adhesive sheet (5) for fixing the flexible printed wiring board (4) to the fixing sheet (6) has a pressure-sensitive layer at least on one side of its porous base.
方法:以多孔玻板吸收管采样,离子色谱法测定。
Methods:Samples was detected by ion chromatography(IC) after collected with multi-hole Absorbing tubes.
方法以装有酸性溶液的多孔玻板吸收管采样,用离子色谱法测定空气中的氨。
Methods The air samples collected with multi-hole absorbing tubes were determined by ion chromatography after sampling.
介绍了松装烧结多孔钛板的制取工艺及性能。
Technologies for manufacturin porous titanium plate by loose powder sintering and its properties have been introduced.
与相近孔隙率的锡青铜烧结多孔结构相比,该微细板翅结构中的流动阻力大大减小,而对流换热能力却增强。
The flow resistance for water and air flowing through the mini-fin structure was less, while heat transfer coefficient was higher than in the sintered bronze porous structure.
换热器管板是典型的二维数控加工多孔零件。
Tube sheets of the heat exchangers are the typical multi-hole parts machined by two-dimensional digital control.
用积分变换和积分方程研究多孔饱和半空间上刚性圆板的垂直振动问题。
The vertical vibration of a rigld circular plate on a poroelastic half space is studied by using the technique of integral transform and integral equation.
本文报告了以多孔玻璃为基材的微通道板的制备及其二次电子发射特性的测量结果。
The paper reports the fabrication of the MCP based on the porous glass (ceramics) and the measurement of secondary electron emission characteristic of the MCP.
该冷凝器将配备由PP(聚丙烯)制成的多孔水板(筛板),用于循环母液的分配。
The condenser will be supplied with perforated water trays from pp, for the distribution of the recycled mother liquor.
每一个体块的墙面和屋顶都覆盖上了多孔金属板创造出均质之感。
Perforated metal cladding wraps the walls and roof of each block to create a sense of homogeneity.
用多孔介质及分布阻力等概念模拟凝汽器中的管束和折流板等几何形状。
It simulates the tube bundle, folding plate and other geometrical forms with multi orifices and distributed resistance.
研究了配料组成和前驱体成型压力对多孔碳板的气体透过性能、孔隙率、和电导率等指标影响。
The effects of composition and pressure of its precursor on the properties, such as gas permeability, porosity, and electric resistivity, were studied.
本文通过分析计算和试验相结合,探讨了圆板模型具有单孔输入热量和多孔输入热量时温度响应的简化计算方法。
This paper deals with the simplified calculating method of the temperature response of the round plate model through the combination of analysis and experiments.
选择的多孔材料有普通纸面石膏板、膨胀珍珠岩、膨胀蛭石和膨润土。
There are plaster board, expanded perlite, expanded vermiculite and montmorillonite as supporting materials.
选择的多孔材料有普通纸面石膏板、膨胀珍珠岩、膨胀蛭石和膨润土。
There are plaster board, expanded perlite, expanded vermiculite and montmorillonite as supporting materials.
应用推荐