该器件的结构原理是基于一个波导管和一个环形共振器之间的耦合，并用时域有限差分法设计和验证了该结构。
The proposed structure mechanism is based on coupling between a waveguide and a ring resonator. This structure is designed and verified by finite-difference time-domain (FDTD) computation.
从oled的发光原理出发，介绍了OLED器件的结构特点和常用的TFTOLED像素电路的结构。
According to the principle of OLED, the structures of OLED device and a pixel circuit of TFT-OLED are introduced.
本文介绍了系统的工作原理、选用的主要元器件、结构设计和主要工艺措施。
This paper introduces working principle of the system, the main devices structure design and main technology.
介绍了一种新颖的超低压保护器件的工作原理、结构特点，并进行了器件结构模拟。
This paper introduces the work principle and structure of new ultra-low voltage protection device, and the structure simulation.
系统分析了微光夜视器的结构及其原理，并结合当前器件存在的激光致盲威胁，提出了增强系统安全的新措施。
In this article, the glimmer detector's structure and working principles are systematically analyzed, and a new solution to the existing laser menace to present detective apparatus is described.
提出了一种采用单读码器件的串行编码绝对式光学编码器，介绍了其工作原理和基本结构。
The presented absolute optical encoder is based on a serial encoding method with single code detector. Its working principle and structure is described.
本文叙述了利用压电材料的正、逆压电效应，研制成功的敏感器件的工作原理、结构和性能。
Principles, configurations and characterizations are described of the sensitive devices developed by using piezoelectric and converse piezoelectric effect of piezoelectric materials.
对这些三维立体显示的器件结构、工作原理以及各自的特性进行了阐述。
The device structures, operation principles and characteristics of the various stereoscopic displays were briefly expounded.
详细介绍了此开关器件的结构、特点及其区别于其他驱动芯片的优势，并给出了器件应用的电气原理图。
The structure, control feature of the switch and some advantages over other driving chip are Introduce in detail, is given the electrical principle chart for automobile application.
主要介绍了这种器件的原理结构图以及它与传统的ADM设备和典型的WX C相比较具有的优势。
The main content are the architecture of the WXC, and the advantages of the WXC compared with the traditional ADM and the typical WXC.
详细介绍了结构化综合布线系统的特点，并具体给出了某一大楼综合布线系统的设计方案原理框图、整体结构和器件选型。
The characters of structurally connecting technique is introduced, and the design, the theory scheme, the structure and the parts selection are presented.
利用磁吸原理，并通过特殊的结构形式，设计了一种分立式表面安装元器件夹具。
The jig, working on the principle of magnetism, with a special configuration and sharp, is used for aging discrete SMDs.
介绍了该设计的原理，并选择了具体的元器件型号，给出了该通道的硬件结构图。并进一步给出了USB固件程序、驱动程序以及上层应用程序的设计方法。
And it introduces the theory of the design, selects specific chip, introduces the hardware of the channel, and brings forward the method of designing USB firmware, driver, and application.
分析了器件的工作原理、特性和制作工艺特点，介绍了器件的结构、制作方法、工艺参数以及器件的性能指标和测试方法。
The operational principle, characteristics, structure of the multifunction device are analyzed as well as the fabrication technique, technical and functional data, measurement and test method.
本文介绍几种用于气象卫星的光学薄膜器件的基本设计原理、结构及用途。
This paper presents the basic design principle, the assembly and the application of several components of optical thin film used for meteorological satellite.
根据可编程器件的特征和“多任务电路结构重配置”的原理设计了EDA教学实验箱。
An EDA teaching experiment box is designed by applying the restructure principle of configuring multitask circuits and the characteristic of programmable logic device.
“组像管”是专为拼接式大屏设计的显示器件，本文讨论组像管的结构与工作原理。
Modular tube "is a kind of display device specially designed for the making of large screen. The structure and working principle of" Modular tube "are described in this paper."
介绍了测辐射热汁的工作原理、器件结构的几何形状和研制状况，叙述了测辐射热计材料的特性及制备技术。
The operation, construction and development status of microbolometer are presented. The properties of vanadium oxides thin film and its preparation are introduced.
在器件结构上结合了温差式和风速计式两种检测原理，设计并制造了一种新型结构的MEMS热式流量计。
A new structure MEMS thermal flow sensor combining two principles of temperature-difference and anemometer is designed and manufactured.
介绍了光波分复用器的工作原理，典型干涉膜型两波长光波分复用器器件结构原理及光学薄膜特性。
This article introduced the principle of WDM and the optical characters, proposed a novel structure of WDM.
本文对已研制成的线阵三相多晶硅交迭栅埋沟CCD (BCCD)摄象器件的结构、原理及实验、结果做一个简要的阐述。
This paper briefly describes the structure and principle of newly developed linear-array buried-channel CCD (BCCD) with 3-phase, polysilicon overlay-gate, and, experimental results are presented.
本文概述了这几种器件的结构、工作原理以及结构参量对器件性能的影响。
This paper summarizes the structures, the operating principles and the influence of the structure parameters on the performance of these devices.
介绍了乐甫波器件的构成和制造工艺，乐甫波传感器传感原理和常用的结构形式，论述了乐甫波传感器当前的研究情况。
Fabrication and technology of the Love wave device, principle and configuration of the Love wave sensor are introduced. The current development of the Love wave sensor is presented.
本文主要介绍硅微条粒子探测器的研究情况，侧重于器件的基本结构及其工作原理。
In this paper, the silicon microstrip detector for particles in introduced. The paper is mainly focused on the basic structure and principle of the devices. .
并在接下来的内容里介绍了OTFT的基本知识，包括常见的器件结构、OTFT的工作原理、材料选择和制备工艺等。
And content in the next we introduce the basic knowledge of OTFTs, including common device structures, OTFTs works, material selection and preparation, and crafts.
介绍了MEMS的特点、特征、技术发展趋势，MEMS器件的类型及其功能，并以多层弯曲磁芯结构微执行器为例介绍了磁驱动微执行器工作原理与制作工艺过程。
In this paper, the feature and the development trend of the MEMS technology are introduced. And the operational principles and the fabrication craft of the magnetic micro-actuator with a mult...
本文给出了完整的系统结构框图和各部分电路原理图，描述如何利用微控制器和蓝牙模块组建系统，介绍了所用器件的原理。
The thesis gives a detailed block diagram and describes the design of every part of hardware circuit. The thesis introduces how to constitute the system using MCU and Bluetooth module.
重点叙述了该器件的结构特性、工作原理、参数设计以及特性曲线分析，并简要概括了在研制过程中采用的一些技术方法和制作工艺。
The structure feature, principle of operation, parameter design and analysis of characteristic curve are emphasized, some techniques followed by brief introduction of technology and...
“组像管”是专为拼接式大屏设计的显示器件 ，本文讨论组像管的结构与工作原理。
Modular tube" is a kind of display device specially designed for the making of large screen."
“组像管”是专为拼接式大屏设计的显示器件 ，本文讨论组像管的结构与工作原理。
Modular tube" is a kind of display device specially designed for the making of large screen."
应用推荐