前脑桥和脑后桥都显示GABA阳性反应。
The protocerebral bridge and the postcerebral bridge show GABA-like immunoreactivity.
目的探讨环椎后桥的发生率及其临床价值。
Objective To study the incidence and clinical significance of the posterior bridge of the atlas (PBOA).
汽车配件，齿轮箱配件，面镜，前桥，后桥。
Motor accessory, gear box accessory, side mirror, front axle, back axle.
机械行走采用传动输入动力，后桥总成强度高，承载力大。
Walking machine adopts the transmission input power, high intensity, rear axle assembly capacity is big.
本系统决定采用振动和噪声诊断方法实现对后桥的质量检测。
In this system vibration and yawp diagnosis method is adopted to realize the quality inspection of the Rear Bridge.
利用非线性有限元理论方法，建立了后桥壳液压胀形有限元模型。
By using non-linear finite element theory, a non-linear finite element model for hydroforming for rear axle housing is established.
根据后桥壳液压胀形的特点，选择刚塑性材料模型进行模拟分析。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
汽车后桥差减速器的装配质量是影响整个汽车性能的一个重要因素。
The assembly quality of automotive rear axle differential reducer is an important factor for the entire car performance.
该设备后桥可装配轮胎，也可以装配钢轮，形成三钢轮，一机两用。
The rear axle assembly equipment tires, can also be assembled steel wheel, formed three steel wheel, one machine.
简单的尾部的720意味着它是有可能的，以消除后桥只有6螺丝。
The simplicity of the rear end of the 720 means it is possible to remove the rear axles with only 6 screws.
介绍了微车后桥壳焊接的一种新工艺，即是小变形不加工的焊接技术。
This article introduces an innovative technology of mini-mobiles rear axle casing, namely a non-machining little distortion welding technology.
前后桥总成、高压油管等关键部件由公司采用先进设备和技术生产制造。
The front and rear axle assemble, high-pressure oil tube and other key components are produced by our company with advanced equipment and technology.
通过试验和生产验证，所焊接的后桥壳体精度高、抗疲劳性能好、质量稳定。
The result of welding experiment and production practice show that the welded rear-axle housing have quality stability and high precision and fatigue strength.
当后桥在车架上向前或向上运动时，这种结构足以调整传动轴长度的任何变化。
This accommodates any effective change of length of the propeller shaft as the rear axles move toward or away from the CAR frame.
差速器是后桥壳总成的一个部件，后桥壳总成包括差速器、后桥、车轮和轴承。
The differential is part of the rear-axle-housing assembly, which includes the differential, rear axles, wheels and bearing.
采用可编程控制器在汽车后桥壳加强环、后盖自动焊接工艺中实现逻辑顺序控制。
Using the programmable controller in the automobile rear axle house ring stiffener, logic sequential control was realized in the top plate automatic welding craft.
分别利用一维和二维载荷谱对EQ1030T型轻型车后桥进行了疲劳寿命预测。
The one-dimension and two-dimension load spectra are used to predict the fatigue life of the rear axle in EQ1030T light truck.
当角度增加时，传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。
The reason the propeller shaft shortens as the Angle increases is that the rear axle and differential move in a shorter ARC than the propeller shaft.
研究结果表明，此系统对于实现汽车后桥的知识管理和智能化设计有较好的支持作用。
The results show that the system is helpful for realizing the knowledge management and intellectualized design of automotive drive axle.
研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律，分析了原淬火压模存在的问题。
The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.
本文扼要地介绍了拖拉机后桥部分提升机构的结构原理，并通过受力分析导出了计算方程。
This paper briefly introduces the structural principles of lifting mechanism of the tractor's rear axle and the equations of calculation have been derived from force analyses.
结论环椎后桥在本组中的发生率为8.2%，环椎后桥发生率与有无临床症状无显著性差异。
Conclusion the incidence of PBOA is 8.2 % in this group. There is no significant difference between the clinical group and comparative group.
在时间平均小波谱和小波包能量法中，分别以各自确定的欧式距离作为后桥质量检测的阈值。
The methods of Time Averaged Wavelet Spectrum and Wavelet Packet Energy can respectively determine its own Euclidean distance as the only quality inspection threshold of the Rear Bridge.
介绍了太脱拉T815型汽车后桥从动圆锥齿轮联接螺栓发生断裂的原因、现象和解决方法。
This paper describes the causes, appearance and remedy of fractured fastening bolts in driven bevel gear of TATRA model T815 truck rear axle.
本文结合EQ140汽车后桥从动伞齿轮辗扩实践，对环形件辗扩工艺的进给规范进行了研究。
The feed regulation in ring rolling is researched on the basis of production of driven bevel gear blank in back bridge of EQ140 automobile in this paper.
台架试验表明，采用该喷丸机对后桥主动锥齿轮进行强化喷丸处理，齿轮的平均寿命提高约40%。
The test results show that the average life of gear can increase40%approximately by taking peen shot for rear axle pinion gear.
本文以前后桥生产线上的一台五自由度喷漆机器人为例，研究其与生产线之间的协调轨迹规划问题。
The spray painting robot with five degrees of freedom in the front-rear axle production line is taken as example for studying coordinated trajectory planning.
以汽车后桥齿轮为实例，在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。
Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.
以汽车后桥齿轮为实例，在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。
Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace.
应用推荐