观察了氧化涂层及基体合金的变形行为。
The deformation behaviors of anodic coatings and substrate were observed.
研究了纤维树脂基复合材料超弹性变形行为。
The hyperelastic deformation behavior of the fiber reinforced polymer is studied.
从变形后的扫描图像可以分析钢板的塑性变形行为。
The plastic deformation of the sheets can be analyzed by SEM images.
结果表明：组织特征对合金的热变形行为有显著影响。
The results show initial microstructure characteristics have significant influences on the hot deformation of alloys.
该模型形式简单，能够较好地描述半固态合金的变形行为。
It has been proved to be a simple model, which can represent the deformation behavior of semi-solid alloys.
本文研究了宏观残余应力对微塑性变形行为与抗力的影响。
The effect of residual stress on microplastic deformation behavior and microyield strength has been investigated.
因此，开展微纳米尺度下材料变形行为的实验研究十分必要。
Therefore, experimental investigations of deformation behaviors of materials at micro and nano scale are urgently required.
研究了挤压态az81镁合金的超塑变形行为及其变形机制。
Superplastic behaviors and deformation mechanism of as-extruded AZ81 magnesium alloys were investigated.
这部分对高聚物变形行为的非线性和率相关性也进行了初步探讨。
The non-linearity and rate-dependence of the deformation behavior of high polymer were discussed primarily in this section.
在所提出的糜棱岩定义中，作者将变形行为作为糜棱岩的主要标志。
This paper suggests that deformation behaviour be the main criterion in the definition of mylonite.
因此研究颗粒材料变形行为及其力学性质具有重要的工程实际价值。
Hence, the study of mechanical properties and responses of granular materials is valuable to engineering practice.
研究了不同初始含湿量及在不同环境中的加气混凝土砌块的变形行为。
The deformations of aerated concrete block in varied initial moisture content and environment were mainly studied.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
本文旨在通过卷边过程中管子受力状态及变形特点分析，揭示卷边变形行为；
The deformation behaviour is explained based upon loading state and deformation feature during inversion of the tube.
此外，在一定的条件下，煤中气体的产生和释放对煤的变形行为具有显著影响。
In addition, under specific conditions the gas produced and released from coal will greatly affect the deformation behaviour of coal.
还提出了对先前加载历史循环变形行为衰减记忆的各向同性变形阻力演化方程。
Moreover, the evolution equations of isotropic deformation resistance which has fading memory on the cyclic deformation behavior of previous history are deveopled.
采用加工图理论系统分析了AZ31 b镁合金在高温变形过程中的变形行为。
Deformation behavior at elevated temperature of AZ31B magnesium alloy was studied systematically by processing map theory.
研究了变形温度和应变速率对半固态LY11合金变形行为和微观组织的影响。
The effects of deformation temperature and the strain rates on deformation behavior and microstructure of the semi-solid LY11 alloy were investigated in the condition of isothermal compression.
将电场处理技术应用于GH4199合金，研究电场对该合金组织和变形行为的影响。
The effects of electric field treatment on the microstructure and deformation behavior of GH4199 superalloy were studied.
采用等温热压缩试验对一种自行研制的高强度易切削锌基合金进行热变形行为的研究。
The hot deformation behavior of a self-developed zinc based alloy was investigated by isothermal compression test.
采用单道次压缩试验，研究了变形温度和变形速率对SS400钢热变形行为的影响。
Effects of SS400 steel's deformation temperature and strain rates on its deformation behavior was studied using single pass compressing test.
本文利用微观力学方法研究了单向连续纤维增强的金属基复合材料的弹塑性变形行为。
A micromechanical method is used to study the elastoplastic behavior of metal-matrix composite reinforced by unidirectional fibers.
弥散铜是一种新型的粉末体电极材料，在加工制备过程中其变形行为会不同于致密体。
The aluminum oxide dispersion strengthened copper (ODSC) is a new type of electrode, and it is deferent from other materials for it is porous.
研究了控制熔体结晶法制备的半固态zl101合金的压缩变形行为以及显微组织的变化。
Compression experiments were carried out to investigate deformation behavior and microstructure of semi-solid ZL101 alloy fabricated by controlled crystallization technique.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。
Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing (ECAP) were investigated by experimental method.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
采用有限元数值计算方法，研究冷喷涂材料改性过程中铜粒子与铜基体非垂直碰撞的变形行为。
Based on developed numerical simulation method, the impacting behavior of copper particle colliding copper substrate in process of transforming material property is investigated.
在较高加载速率下，合金表现出类线性超弹性变形行为，可获得高达4.5%的类线性超弹性。
At higher strain rate, the alloy exhibits linear-like pseudoelasticity, which is up to 4.5%.
研究了在具有不同保持时间、不同应变率、不同应变幅值及其历史对材料的循环变形行为的影响。
The effects of the dwell time, strain rate, strain amplitude and their histories on the cyclic deformation behavior are investigated.
应用推荐