用截面变形法实现规则三维中间层在线骨骼驱动下的变形；
The regular 3D middle layer was driven by linear bones with section deformation method.
采用图形变形法对简化优化模型在不同试验设计点进行可视化分析；
Then Graph Morphing is adopted to visualize the local region around the experiment design point of simplified model.
在干扰能量法和超变形法的基础上，提出了基坑稳定评判的广角度综合评判法。
Based on the Inteference-Energy method and Over-deformation method, the extensive Angle method is applied in the judgement of the stability of ground foundation pit.
在此着重介绍了弹性反变形法，一种兼有刚性固定法和塑性反变形法特点的预变形法。
In this article, it emphatically introduces the method of elasticity anti-distortion, which contains the characteristics of the method of rigidity immobility and the method of anti-distortion.
降低局部刚性：焊接封闭焊缝或其刚性较大的焊缝时，可以采取反变形法来降低结构的局部刚性。
Reducing partial rigidity: When closed weld or the weld which has less rigidity are welded, we can take anti-deformation way to reduce the partial rigidity of component.
同时介绍了控制焊接变形的几种方法，如反变形法、控制工艺参数、控制温度场以及系统综合分析等。
Some methods used in the control of welding deformation, such as reverse deformation, system analysis, controlling process parameters and temperature field, are introduced.
在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。
On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.
采用变形法计算混凝土应力时，假设应力在各个时段内以突变形式增加，并对这种假设带来的误差进行了分析。
When the deformation method was used for concrete stress calculation, it was assumed that the stress increased suddenly at each stage, and such an assumption led to certain errors.
当应变很大时，大变形法和小变形法计算的沉降和孔压差异很大。因此，大小变形法分析结果的比较应采用总应力法。
So the comparison of large strain method and small strain method should be carried out with total stress method.
利用有限元方法对预变形法减小焊接变形进行了模拟，给出了确定预变形大小的方法，并对最终的焊接变形进行预测。
The predeformation process to decrease welding deformation is simulated by FEM and the method to determine predeformation value is given. The final deformation after welding is predicted.
通过对实例的分析，表明对于简单构件的激光焊接，残余塑变理论可以用来预测变形，反变形法是控制焊接变形的有效方法。
The theory of residual plastic strain can be used to predict the distortion of simple components, and the reverse deformation is an effective method for controlling the welding distortion.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
By using finite element method, the deformations of flat membrane mirror have been calculated.
采用影响函数法推导了薄板轧制时变形区内轧辊弹性压扁的计算式。
A calculation method of the flattening in sheet rolling deformation zone, using influence function, was derived.
采用数值分析方法对冲击压痕法测量残余应力的弹塑性变形过程进行了理论分析。
The indentation method of residue stress measurement depends on strain measurement around an indention caused by an impacting sphere.
本文介绍了用阴影云纹法测量爆炸载荷下铝板变形的方法及结果，并进行了误差讨论和静态标定。
A shadow moire method and its results for measurement of distortion of aluminium plate at exploding charge is presented. Possible errors are also estimated.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
结果一系列非参数检验证实数字变形模型的有效性，且配对比较法优于普通的标准比较法。
A series of non parametric tests validated the digitized distortion model and indicated that the Paired Comparison Method was superior to the Standard Comparison Method.
研究了绝对坐标法在大变形柔性梁系统刚-柔耦合动力学问题中的应用。
The application of an absolute nodal coordinate (ANC) formulation in the coupling dynamics of flexible beams with large deformation was investigated.
采用大变形几何非线性有限元法分析强夯加固机理及其振动对环境影响。
The geometric nonlinear finite element method is used to analyze the impact mechanism of dynamic compaction.
热弹塑性有限元法和固有应变法是焊接变形预测的两种主要数值方法。
Thermal-elastic-plastic and inherent strains FE methods are two means, which have been applied to the prediction of welding deformation.
为此，采用等价应力法对有初始变形的井架进行结构分析。
An equivalent stress method for the structural analysis of derrick with initial deformation is offered.
研究了变形体虚功原理的理论和建立方法，并将其用于建立接触问题有限元法计算公式。
The theory of virtual work principles of deformable bodies and the technique to derive their expressions are studied and applied to contact problems to build FEM formulas.
本文根据铅的刚塑性本构关系，利用均匀塑性变形能法，推导了铅挤压阻尼器的阻尼力滞回模型。
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
采用模糊聚类法进行变形分析具有一定的可探讨性。
To analyze the settlement deformation by utilizing Fuzzy Cluster method is worthy of discussing.
采用模糊聚类法进行变形分析具有一定的可探讨性。
To analyze the settlement deformation by utilizing Fuzzy Cluster method is worthy of discussing.
应用推荐