介绍了国内尼龙6的双螺杆反应挤出工艺。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
采用反应挤出法对EPDM进行动态硫化。
综述了国内外聚合物反应挤出方面的研究进展。
Recent advances of reactive extrusion processing of polymers at home and abroad were subjected in this paper.
对双螺杆反应挤出机的工艺要求及特点作了简介。
The technical properties of twin screw reactive extruder were introduced briefly.
反应挤出机除了塑化功能外，在设计上应充分考虑反应挤出工艺的要求。
Besides plasticizing capacity, the reaction function should be taken into account when a reaction extruder is being designed.
反应挤出法是物理改性一种，作为一种新技术，在淀粉改性中有很多优点。
The reactive extrusion is one of the physical modify, it has many merits as a new technology of starch modification.
介绍了反应挤出技术在聚乙烯、聚丙烯专用料开发中的应用及其工艺原理。
The principle of the extruding reaction technology and its application in development of the special resin of polypropylene and polyethylene.
系统简介了聚丙烯熔融接枝体系的组成、机理及实现熔融接枝的反应挤出技术。
Melt grafting modification of polypropylene were introduced in this paper, including its formation, mechanism and reactive extrusion to achieve melt grafting.
介绍了将电磁场引起的机械振动力场引入聚合物反应挤出过程的作用和基本作用原理。
The function and basic principle of the vibrating force field induced by the electro-magnetic field during the reactive extrusion process of polymer were investigated.
结果表明，催化体系的聚合反应速度完全满足双螺杆挤出机反应挤出停留时间的要求。
Results show that the reactive speed of catalysed system can meet the retention time of reactive extrusion based on twin-screw extruder.
从反应挤出的原理和特点、螺杆反应挤出机、反应挤出的应用等方面分别进行了介绍。
The theory of reactive extrusion processing, screw extrusion reactors and the application fields of reactive extrusion processing were emphatically discussed.
介绍了热塑性聚合物的反应挤出的基本原理、反应类型及应用和相关的反应挤出设备。
The principle of reaction extrusion of thermoplastic polymer, the types and applications of reaction extrusion, and the related reaction extrusion equipment are introduced.
综述了利用哈克转矩流变仪及采用反应挤出法制备接枝聚合物的特点及接枝体系的选择。
New methods of preparing novel polymer and modifying polymer are grafting of polymer by reactive extrusion and in the Haake torque rheometer.
重点描述了聚合反应挤出设备的类型与特点，进而介绍了聚合反应挤出设备的应用概况。
The type and characteristics of the equipments in reactive extrusion processes for polymerization were mainly described, and then its application was introduced briefly.
简要介绍了该聚合物合金的加工过程，其主要工艺是通过低温固相挤出和反应挤出制备。
The processing technology of this polymer alloy is briefly introduced. This polymer alloy is prepared by low temperature solid-state extrusion and reactive extrusion.
利用反应挤出技术和红外光谱分析方法，对马来酸酐(MAH)接枝聚丙烯(PP)的制备工艺进行了研究。
The preparation process of maleic anhydride grafted polypropylene (PPg-MAH) was studied by reactive extrusion using a twin screw extruder system and infrared spectroscopy.
在聚合反应挤出过程中，化学热效应显著影响材料体系温度，从而影响反应速率以及高分子材料结构与流变性能。
The chemical calorific effect has a great influence on the temperature, the reaction rate, the polymer material structure and rheological property in reactive extrusion processes for polymerization.
以过氧化二异丙苯(DCP)为引发剂，使用反应挤出机研究了不同种类聚乙烯及其共混物接枝马来酸酐的反应规律。
Taking DCP as initiator, the reaction rule of different kinds of PE and their blends grafted with MAH in a reactive extruder was studied.
采用PP熔融接枝MAH和不饱和羧酸混合单体通过反应挤出增容PP/PA6共混物，研究了增容共混物两相间的界面相互作用。
The interfacial interaction of compatibilized PP/PA6 blend prepared by melt grafting of PP with MAH and other unsaturated acid has been studied.
通过反应挤出法对聚丙烯（PP）进行硅烷接枝交联改性获得高熔体强度PP（HMSPP），并对HMSPP的发泡性能及影响因素进行了研究。
The producing methods of HMSPP were discussed, including direct polymerization, radiation grafting and cross-linking, silane grafting and cross-linking, and so on.
研究结果对双螺杆反应器的优化设计和聚合物挤出加工有一定的理论指导意义。
The research results put forward the theoretical instruction of the design of twin screw reactor and the process of polymer extrusion.
利用反应性挤出技术，在熔融状态下BPO能有效地引发HBS木质素与苯乙烯的接枝共聚。
HBS lignin can be effectively copolymerized with styrene initiated with BPO in molten state by reactive extrusion technology.
介绍双螺杆挤出机的最新进展以及反应性挤出生产线控制技术开发动向；详述粘度计在反应性挤出工艺中的应用。
The new progress about twin—screw extruders and control technology in reaction extrusion line are described. Some applications of viscometer in this processing technology are introduced too.
通过调整双螺杆挤出机的螺杆转速、不同加热段的温度，确定了接枝反应的最佳工艺条件。
By adjusting the screw speed of the twin-screw extruder, temperatures of different heating stages, the optimal processing conditions for grafting reactions are determined.
以二叔丁基过氧化物(DTBP)为引发剂，在反应型双螺杆挤出机中进行ABS接枝马来酸酐的研究。
It was studied that ABS was grafted by MAH, using DTBP as initiator, and reacted in twin-screw extruder.
以双螺杆挤出机为反应器，制备了一系列硅烷接枝聚乙烯。
A series silane grafted polyethylenes were prepared by using the twin screw extruder.
采用在熔融挤出过程中提高双螺杆挤出机螺杆转速的方法，研究了机械力引发马来酸酐(MAH)熔融接枝弹性体poe的接枝反应。
Grafting of maleic anhydride (MAH) onto POE performed in melting state through mechanical force initiation by increasing the screw rotation speed of twin-screw extruder was studied.
阐述了利用挤出机通过各种反应性聚合物或官能化聚合物在熔融共混过程中就地形成共聚物增容剂的方法。
The method to generate compatibilizers "insitu" during melt blending in extruder using reactive polymers or functionalized polymers are described.
通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段，研究了共混（反应）时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。
The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.
通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段，研究了共混（反应）时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。
The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.
应用推荐