双组分改性环氧铝粉漆，用于压载水舱。
Two components modified aluminium pigmented epoxy for use as a first coat in ballast tanks.
双组分改性环氧铝粉漆，用于压载水舱。
Two components modified aluminium pigmented epoxy for use as a first coat in ballast tanks .
本文论述了双组分聚酯木器漆的制备方法。
This paper discusses the preparation of two-component super polyester woodenware paint.
研究了粉煤灰填充双组分聚氨酯防水涂料的效果。
The influence of fineness of fly ash on film-forming of two-component polyurethane waterproof coating was studied.
双组分系统是广泛存在于原核和真核细胞中的信号转导系统。
The two component system is a signal transduction pathway in both of the prokaryotes and eukaryotes.
聚氨酯涂膜防水材料是双组分化学反应固化型弹性防水涂料。
Polyurethane coated waterproof material is a type of elastic waterproof material solidified in bi-component chemical reaction.
此槽要用双组分环氧涂层衬里，以防止槽的内表面气相腐蚀。
The tank should be lined with a two-component epoxy coating to prevent vapor phase corrosion of the tank interior.
对室温固化铸造模用双组分聚氨酯浇注胶的制备进行了研究。
The preparation of the two-component casting polyurethane rubber curing at ambient temperature for cast moulds was studied.
对测定双组分染液中染料含量的双波长分光光度法进行了研究。
Dual-wavelength spectrophotometry is a way to simultaneously determine the content of two dyestuffs in mixed solution.
研究了13X沸石分子筛对双组分聚氨酯胶粘剂固化性能的影响。
The effect of 13X zeolite molecular sieves on cured property of two -component PU adhesive was studied.
文章推导出了双组分理想混合物的需点与泡点之间的温度差计算公式。
A formula was derived to calculate the temperature difference between the dew point and boiling point of a binary ideal mixture.
研究了空气湿度对双组分聚氨酯灌封胶固化过程内部产生气泡的影响。
The effect of air-humidity on bubble of the cured two-component polyurethane was studied.
介绍了双组分造纸助留增强剂的配方、制备方法、产品性能和应用情况。
Formula, preparation, properties and application of double component to make paper reinforcing agent are described.
采用溶液共混法将聚苯胺溶液与丙烯酸树脂共混，制备了双组分导电涂膜。
The blend of polyaniline and polyacrylate was made by solution process, which is further used to prepare the conductive coatings film.
或者与含活泼氢的水性聚合物组成双组分胶黏剂，使用前分散于水性主剂中。
They can also constitute two-component adhesives with aqueous polymers containing active hydrogen, and are dispersed in aqueous main agent before use.
利用哈克流变仪对低熔点双组分合金填充聚合物材料体系的流变性进行了研究。
The rheology properties of polymer filled with lower melting point dual component metallic alloy were studied by Hakke rheometer.
考察了不同催化剂对双组分聚醚型聚氨酯防水涂料固化效果及固化后性能的影响。
The effects of different catalysts on the solidification and the mechanical properties of the casting film of two component polyether type polyurethane waterproof coating were investigated.
本文采用SIMPLE方法对有流动条件下双组分系统的凝固过程进行数值模拟。
The present work numerically simulates the solidification of binary systems in the presence of convection with SIMPLE method.
该面漆是一种双组分聚氨酯，可抗紫外线，化学腐蚀，油沾和抗黄变得环氧树脂。
The topcoat is a two-component polyurethane providing uv, chemical and stain resistance or a reduced yellowing epoxy.
研究密螺旋体的基因序列和双组分调控系统可能为解释上述现象提供了理论依据。
Studying the gene sequence of treponema and twocomponent regulatory systems may provide the theoretical basis for explaining the above phenomena.
所得漆膜的机械性能达到溶剂型双组分聚氨酯涂料的性能，并具有优异的防腐蚀性。
The mechanical property of the film reached up to that of two-components solvent based PU coatings, and the coatings possessed excellent anti-corrosive property.
结论：所提出的改进方法适用于干扰组分有单独吸收峰的双组分混合物的紫外测定。
Conclusion: the improvement method is suitable for the ultraviolet determination of two component mixture in which the interference component possess an undisturbed absorption peak.
探讨了双组分单体的摩尔比，溶胀温度和时间，反应压力和时间等对接枝率的影响。
The effect of molar ratio of monomers, swelling temperature and time, reaction time and pressure on the grafting density are discussed.
从反应速度、适用时间等方面研究了几种交联剂对水性双组分氟涂料漆膜性能的影响。
The influence of several cross-linking agents on the performances of film of two-pack waterborne fluorocarbon resin paint is studied, in terms of reaction rate and pot life.
本文采用双组分环状二相流模型对吸收-扩散式制冷系统蒸发器的传热进行了分析计算。
In this article the analytical calculation has been made for the evaporator heat transfer in absorption-diffusion refrigeration system with the annular two-phase two-component heat transfer model.
采用PE/PP双组分纤维，经梳理成网、热风粘合加固后制成蓬松、柔软的非织造布。
The soft and fluffy nonwoven is made with PE/PP bi-compound fiber after carding and hot-air through bonding.
根据涂层的要求，选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。
According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.
研究以PVC糊树脂为基础、聚氨酯为增粘树脂的双组分塑料门窗与墙体接缝用填缝胶。
The double-component polyurethane sealant based on PVC paste resin used for sealing the joints be-tween PVC windows and concrete wall was studied.
由HAR和六次甲基二异氰酸酯反应制备了性能优异的高固体分双组分丙烯酸聚氨酯涂料。
A double component coating, acrylic polyurethane with high solid and good performance, was prepared by the reaction of HAR and HDI.
研究了自交联丙烯酸酯的用量及A组分与B组分的配比对双组分丙烯酸酯胶粘剂性能的影响。
The influences of the dosage of HEA (or HPA, GMA)and ratio of component A and B on the capability of two-component acrylate adhesive were studied.
应用推荐