微型剪切试验为铝合金焊接接头力学性能的评定提供了一个新途径。
The micro shear test could give a new way to evaluate the mechanical properties in weld joint of aluminium alloy.
本文在黄土已有研究成果的基础上,通过三轴剪切试验对类黄土(黄土状土)的强度软化特性进行了重点研究。
This paper mainly studies the strength softening characteristic of loess-like soil by triaxial shear test on the basis of primary research productions of loess.
卸载体缩是很多土在剪切试验中表现出的一种变形特性。
Volume contraction in unloading is known in shear tests of most kinds of soils.
按新、旧两种剪切试验标准对相同材料进行了大量试验研究。
Shear test of clad steel plate and sheet was carried out according to old and new standards.
并通过一个大型三轴剪切试验的算例,说明了该模型的合理性。
An example of large scale triaxial test was taken to prove the rationality of the present model.
通过应力主轴固定单调剪切试验分析了所制作砂样的初始各向异性特性。
The inherent anisotropy of sands was investigated firstly through the shear tests with fixed principal stress axes.
本文介绍了微型剪切试验与拉伸试验、断裂力学试验等参数之间的对应关系。
This paper describes the correlation between the characteristic values of the micro shear test and those of the conventional tensile, fracture mechanical tests.
通过击实试验和击实后土样的压缩和剪切试验研究红黏土的变形和强度特性。
The deformation and shear strength of lateritic clay are studied by compaction tests and shear tests.
在草的根系的力学研究中,通过室内直接剪切试验来定量分析土体的破坏规律。
Within the mechanics research of the root system, we try to analyze with quantification the destroying rule through directly indoors cutting test.
设计了新的剪切试验件和剪切夹具,首次开展了DD 3单晶的剪切试验研究。
Researches on pure shear behaviors of DD3 single crystal are experimentally carried out for the first time.
土与结构接触面是工程中经常遇到的,剪切试验是研究界面特性的主要方法之一。
The interface of soil and structure is often found in projects. Shear test is one of the main methods to study interface behavior.
本文通过室内吸力控制的非饱和土三轴剪切试验,研究上海地区软土的强度特征。
Some tri-axial tests were carried out herein to analyze unsaturated soil strength for Shanghai soft clay.
介绍了稳态强度理论的基本概念、稳态强度的固结不排水剪切试验方法及试验结果;
The steady state strength concepts, the consolidated-undrained triaxial shear test method and the test results are introduced.
介绍了轧机等大型关键设备所配备的大尺寸安全销实物单面剪切试验装置与试验方法。
In this paper, the single shear substance testing device and relative testing method for large dimension shear pin were introduced.
通过4组超高强度混凝土梁剪切试验,考察各主要因子对剪压破坏梁抗剪强度的影响。
Study on shear compression failure of RC beams without stirrups was carried out by 4 series of ultrahigh strength specimens to estimate the influence of each design parameter separately.
本文在大量动态直剪试验的基础上,建立了散体在振动场作用下剪切试验的几个力学模型。
Based on a large number of dynamic shear tests, several mechanical models of dynamic shear test of bulk materials have been established in this paper.
然后选取珞珈山土样进行了室内非饱和土的三轴剪切试验,得出试验土样的抗剪强度参数。
Secondly, Luojiashan soil samples were selected for the unsaturated triaxial tests and the shear strength parameters were obtained.
测定了铝合金的微型剪切试验和拉伸试验的性能参数,研究了这些性能参数之间的数量关系式。
The characteristic values of micro shear test and tensile test of alloy aluminium were determined and the quantitative expressions of these characteristic values were studied.
通过小振幅振荡剪切试验,对经历预剪切的非牛顿原油在静置条件下的结构恢复性进行了研究。
The experiment of static structural recovery on pre-sheared non-Newtonian crude oil has been performed by small amplitude oscillatory shear.
对兰州原状黄土不同剪切方位、不同含水量试样进行了一系列常规三轴不固结不排水剪切试验研究。
Based on the tri-axial test results, the influence of water content and shearing bearings on Lanzhou s loess shear strength parameters.
试验研究表明巨型滑坡滑带土的大型原位剪切试验对滑坡稳定性分析和工程治理优化具有重要价值。
It shows that in situ experiment is important to the landslide stability analysis and the optimization of landslide engineering treating, especially to the giant landslide.
利用人工钙质砂和三轴剪切试验手段,就颗粒破碎及其对钙质砂变形和强度特性的影响进行分析研究。
The influence of particle breakage on deformation and strength properties of calcareous sands was investigated using artificial calcareous sands and triaxial testing.
对不同种类土样的试验表明,控制试样侧向不变形的灵敏度高,达到了K_0固结三轴剪切试验的要求。
The test results of different kind of soil indicate that it has high sensitivity to control lateral deformation and fulfils the requirement of K0-consolidation triaxial apparatus.
通过剪切试验研究,得出了不同界面剂对新老混凝土粘结剪切性能的影响规律,并进行了双因素方差分析。
By shear testing investigation, the influencing laws of different interfacial agents on new old concrete bonding shear property are obtained and the double factors variance analysis is presented.
在大型三轴仪上进行了素碎石土和加筋碎石土的三轴排水剪切试验,探讨了加筋碎石土的强度及变形特性;
On the large-scale triaxial test equipment, 3D shear test of polymer geogrid reinforced crushed gravel soil and non-reinforced soil were carried out.
点焊试样剪切试验中存在脱壳式、剪断式和压断式三种断裂模式,所对应的熔核尺寸和剪切载荷依次增加。
There are three fracture modes in shearing tests, i. e. , exuviation, shear and crush fractures, with nugget dimensions and shearing loads increasing in turn.
选用车辙试验和恒定高度重复剪切试验(RSCH)来进行掺加PR系列添加剂沥青混合料的高温性能研究。
Impacts on asphalt mixture's high temperature performance with PR series additives added by means of rutting test and Repeated Shear Test (Constant Height)(RSCH) were investigated.
本文对风干的红砂岩粗粒土及饱水红砂岩粗粒土路堤填料进行了CBR试验、耐崩解试验、压缩试验和剪切试验。
The CBR test, slake durability test, compressing test and shearing test of the dry and wet redstone granular soil samples were respectively carried out in this paper.
通过对钎料润湿性的研究确定钎焊试验的温度和时间范围;通过剪切试验研究了钎焊工艺参数对接头强度的影响。
The temperature and time range of brazing through the wetting experiment were confirmed, and the effect of brazing conditions on the joint strength through the shear experiment was discussed.
结合大跨越铁塔设计,对高强度螺栓的选择、紧固扭矩值的确定、螺栓的质量检验、螺栓的剪切试验等情况作了论述。
Selection of the highstrength bolts, determination of fastening torque values, quality checking of bolts, and shear tests of bolts are illuminated based on the design of the iron tower.
应用推荐