分别就前馈控制和反馈控制两种情况加以研究。
Both feedforward structure and feedback structure are investigated in this paper respectively.
利用滤波器解决了前馈控制的物理不可实现问题。
By using a filter the physically unrealizable problem of the feedforward control is realized.
其基本原理上相当于对负载干扰信号加入了前馈控制。
Its principle corresponds to applying the feed-forward control to the load disturbance.
这些信息不仅仅是反馈或是前馈控制，还供研究所用。
This information was used for studies, not just for feedback or feedforward control.
利用前馈控制模型生成的数据，检验了实际控制效果。
Subsequently, the actual engine control experiment was performed with data produced by the feed-forward control model.
在主动控制技术中，自适应前馈控制方法是最常用的方法。
Among active control techniques, adaptive feed-forward control technique is popular.
而焦炉加热前馈控制数学模型又有三种形式，多种计算公式。
There are three forms and many formulas of mathematical models for feedforward control of coke oven heating.
通过前馈控制、过程控制、反馈控制对企业物流成本进行控制。
Through forward control, process control, feedback control of the logistics cost to build the control system.
为了提高系统的动态性能，提出一种新型的负载电流前馈控制方案。
To improve the dynamic performance of the system, a new load-current feedforward control scheme was proposed.
在闭式循环柴油机配氧反馈控制的基础上采用了神经网络前馈控制策略。
Based on the feedback control, the neural feedforward compensation was applied in oxygen control of closed cycle diesel.
利用CMAC神经网络控制器实现前馈控制，保证系统的控制精度和响应速度。
The CMAC controller realizes feed forward control and guarantees the control precision and response speed.
该伺服系统包括速度环和位置环以及前馈控制，因此该系统是一个复合控制系统。
The servo loops include speed control loop and position control loop plus feed-forward control, therefore the system is a compound control system.
本文应用前馈控制模型对压电陶瓷刀具的位置进行补偿控制，取得了满意的效果。
A pre feed controlling model is adopted making compensate control for the position of piezoelectric ceramic cutting tool. The result is satisfactory.
结论前馈控制方法整体上提高了ICU风险管理能力、护理管理效率和护理质量。
Conclusion Feedforward control the overall risk management ability ICU, nursing management efficiency and the quality of nursing.
得到了能应用到变流量系统中可预测未来负荷变化趋势并提前作用的前馈控制方案。
Get used to change the flow of load variation trend and predict future ahead of feed-forward control scheme role.
将预测控制与前馈控制相结合，提出了一种适合于位置跟踪系统控制的复合控制算法。
To combine the predictive control with the forward control, a new control algorithm is put forward for the position tracking control.
采用前馈控制、反馈控制和现场控制的方法建立住院诊疗实时控制临床路径管理模式。
A model of clinical pathways in real-time control of the quality of hospitalization diagnosis and treatment has been set up.
针对自适应前馈控制方法的缺点，提出一种周期性振动主动控制的自适应反馈控制方法。
As the adaptive feedforward control method used for active control of periodic vibration has many shortcomings, an adaptive feedback control method was proposed based on on-line frequency estimation.
补偿电流跟踪控制选用三角波比较控制法，并采用带电压前馈控制的比例调节闭环控制。
Compensatory current control adopts triangle wave compare control, and DC voltage control adopts PI closed loop control.
针对直线驱动系统，提出一种新的加速度前馈控制策略及前馈质量与电机常数的校准算法。
A novel acceleration feedforward control strategy and a calibration algorithm on feedforward mass and motor constant were proposed for linear driving system.
样条学习前馈控制(LFFC)是一种在被控系统不能精确建模时仍能保证跟踪性的控制方法。
B-spline Learning Feed-Forward control (LFFC) is a control strategy to obtain accurate tracking and is subject to reproducible disturbances.
结果表明，前馈控制模型具有良好的预测能力，模型最大和平均预测误差分别小于8%和5%。
The results show that the feed-forward control model has good predication ability. Maximal and average prediction errors of the model are less than 8% and 5%, respectively.
在并联型有源滤波器的控制过程中，前馈控制能够快速跟踪负荷波动，但需要精确的模型和参数。
For the control of shunt APF (Active Power Filter), feedforward is an effective way to track the load variation, but accurate models and parameters are demanded.
而采用工作辊与中间辊弯辊相结合的板形前馈控制模型则对二次和四次板形均具有很强的控制能力。
However, for work roll and intermediate roll bending compensation model both quadratic and quartic components of strip flatness can be controlled effectively.
再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
Active Filter access point and then after the line current harmonics back to the company as the regulator's input, adjusting the feedforward control error.
本文提出了在交流矢量控制系统中设计线性状态观测器的新思路，并以此重构出负载扰动作前馈控制。
A novel idea of designing and applying linear state observer is presented in this paper to reconstruct the load disturbance for feed forward control in AC. vector control systems.
并通过仿真比较该算法与PID前馈控制的效果，验证其具有良好的跟踪性能、鲁棒性和抗干扰能力。
The simulation results show that the new PFC-PID control method has better tracking performance, robustness and anti-disturbance ability than those of feed-forword PID control.
再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
APF then access points al0ng the harmonic current feedback, as a regulator input, adjusted feedforward control error.
为研究前馈控制的适用性，选择不同的信号模拟负荷变化，对比前馈控制对不同干扰形式的调节效果。
For the study, the choice of applicability feed-forward control of different load simulation signal and contrast of different forms of feed-forward control regulation of interference.
为研究前馈控制的适用性，选择不同的信号模拟负荷变化，对比前馈控制对不同干扰形式的调节效果。
For the study, the choice of applicability feed-forward control of different load simulation signal and contrast of different forms of feed-forward control regulation of interference.
应用推荐