• 本文就变速切削过程中电机电流的变化特征进行了较为系统的研究。

    The varying characteristics of motor current in vari-speed cutting are discussed in this paper.

    youdao

  • 自适应切削可以保证在加工条件不断变化的情况下使切削过程始终处于最佳状态。

    The adaptive cut can make cut process at optimum condition all along, in case the machining conditions are constantly changing.

    youdao

  • 可动态模拟金属实际切削过程中切屑流的形成、卷曲及折断过程,为切屑仿真提供图形可视化支持。

    The methods presented above can dynamically simulate the process of chip generation, curling and breaking, giving visualization tools for turning process simulation.

    youdao

  • 因而,针对叶片在切削过程中的误差进行预测及主动补偿技术的研究,对提高叶片加工质量和加工效率具有重要意义。

    Consequently, the prediction of the machining error in blade milling process and the investigation of active compensation can improve machining quality and processing efficiency significantly.

    youdao

  • 从而为正交切削过程的数值模拟奠定了基础。

    So it prepares for numerical simulation on metal orthogonal cutting process.

    youdao

  • 对正交切削过程的力学边界条件进行合理假设。

    The mechanical boundary conditions in metal orthogonal cutting are reasonably assumed.

    youdao

  • 利用工业电视摄像系统对冰洲石的切削过程进行观察和记录。

    An industrial television camera system is used to monitor and record the cutting process of Iceland SPAR.

    youdao

  • 已有的研究表明,有限元方法是研究切削过程的一种有效手段。

    Existed studies have shown that the finite element method is an effective means of researching the cutting process.

    youdao

  • 金属切削过程中,不同的切削参数对零件的加工精度影响是不同的。

    Different cutting parameters may have different influences on machining accuracy in metal cutting process.

    youdao

  • 本文作者运用经典控制论对切削过程的位置误差补偿控制进行了研究。

    In this paper, author studies the position error-compensating control problem of cutting process by using the classical control theory.

    youdao

  • 运用显微高速摄影技术分析了切削过程中金属显微组织塑性变形规律。

    The deformated patterns of microstructures during metal cutting were analyzed by means of high speed microphotography.

    youdao

  • 分析了切削过程中产生的“扎刀”现象并提出防止“扎刀”的有效措施。

    The "breaking edge" phenomenon produced in the cutting process is analyzed theoretically. The effective preventive measures for the "breaking edge" phenomenon are also presented.

    youdao

  • 在机械加工过程中,刀具直接参与切削过程,从工件上切除多余金属层。

    Needed In machining process, tool directly involved in cutting process, from metal layer of workpiece excision redundant.

    youdao

  • 分析了切削过程中切削力的变化情况,并指出负剪切现象对刀具破损的影响。

    Analysis is conducted for the variation of cutting force during the cutting process and the effect of negative shearing on the cutter damage is pointed out.

    youdao

  • 采用有限元方法模拟三维精密切削过程,包括三维正交切削和三维斜角切削。

    The finite element analysis method is used to simulate the 3D precision cutting, including orthogonal cutting and oblique cutting.

    youdao

  • 这种粘结实质是切削过程中刀具与工件元素之间的相互扩散及形成再结晶所致。

    In fact the cause of adhere mechanism is the diffusion between the elements of the cutter and workpiece as well as the re-crystallization.

    youdao

  • 金属切削过程是一个很复杂的过程。图7.2用图的形式显示了基本材料去除作业。

    Metal cutting process is a very complex process. Fig. 7.2 shows the basic material removal operation schematically.

    youdao

  • 并用第一原理应力计算方法对单晶硅纳米切削过程中的脆塑转变的可行性进行了研究。

    In this paper, the mechanism of brittle-ductile transition of glass-ceramics at different low temperatures was studied.

    youdao

  • 在高速切削条件下,材料的切削机理将发生变化,切削过程将变得容易,切削热将降低。

    In this process the heat of cutting is reduced and the material can be easily cut.

    youdao

  • 重点研究了盾构刀盘在切削过程中负载冲击和刀盘卡死产生的原因以及冲击带来的影响。

    The impact load and its effect as well as the reason of cutterhead deadlocking were mainly studied.

    youdao

  • 切削过程中金刚石薄膜从基体表面的破损剥落是金刚石薄膜涂层刀具的一种主要损坏形式。

    The diamond films' breakage and desquamation from body surface are main damage forms of the diamond film-coated tools in the cutting process.

    youdao

  • 讨论了航空铸造5号镁合金(ZM5)切削热的特点,分析了切削过程中温度场的分布规律。

    This article discusses the heat in cutting 5th magnesium alloy (ZM5) and analyzes the distribution regularities of the temperature field in the cutting process.

    youdao

  • 用传统的理论或实验方法研究切削过程中各个声辐射体对总体切削噪声的贡献比较困难和繁杂。

    It is difficult to study the contribution of each sound radiator to total cutting noise in a cutting system by means of traditional theoretical or experimental methods.

    youdao

  • 切削力、切削温度和刀具的磨损是反映切削过程的主要指标,特别是切削力,其使用范围更广。

    Cutting force, cutting temperature and tool wear are the main indicators reflecting the cutting process, especially the cutting force, the use of wider range.

    youdao

  • 在了解金属切削过程并运用这些知识帮助改善与金属切削有关的制造作业方面已经做了许多努力。

    A number of attempts have been made in understanding the metal cutting process and using this knowledge to help improve manufacturing operations which involved metal cutting.

    youdao

  • 针对数控强力切削中颤振问题,建立了包含切削过程颤振环节的数控强力切削伺服系统数学模型。

    Faced with chatter during CNC heavy cutting, we constructed the mathematical model of CNC heavy cutting servo system which contains chatter in the process of cutting.

    youdao

  • 针对数控强力切削中颤振问题,建立了包含切削过程颤振环节的数控强力切削伺服系统数学模型。

    Faced with chatter during CNC heavy cutting, we constructed the mathematical model of CNC heavy cutting servo system which contains chatter in the process of cutting.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定