以声发射、功率监控和改进的神经网络技术,借助刀具监控软件,识别刀具切削工作的正常和失效状态。
Based on acoustic emission, power monitoring and improved neural network technology and using cutting tool monitoring software, the normal or abnormal condition of cutting tools can be identified.
去除热损伤的方法是仔细切削本体金属,然后,再做一次回火刻蚀检查,确保切削工作没有产生进一步的热损伤。
Heat damage generally is removed by carefully machining the base metal. Afterward, another temper etch inspection is done to ensure that the machining did not create more heat damage.
对国内外切削颤振领域的研究工作进行评述,分析了现有的颤振预报方法的优缺点。
The work in the field of prediction of cutting chatter is summarized. The advantages and disadvantages are also analyzed in this paper.
弧齿锥齿轮刮削刀盘采用了斜角切削,在刮削过程中工作角度发生了变化。
The scraping cutter is used with an oblique Angle to cut a gear, and the working Angle is changed during scraping.
研究切削性能更为优良的推土铲对减小推土机工作阻力意义重大。
It is significant for bulldozer to study the shovel's cutting performance for reducing the working resistance.
研究工作对该材料加工过程中的切削用量、冷却液和刀具几何参数等的选择具有指导和参考意义。
The research is useful in selecting the tool geometry, coolant and cutting parameters in machining this kind of superalloy.
刀具安装偏高使刀具工作前角增大,从而改善切削性能。
A turning tool being installed on higher position will increase its working orthogonal rake to improve its machinabilities.
在组合机床设计中,切削用量选择和主轴参数计算是一项非常重要的工作。
In the designing of Modular Machine Tool, choosing cutting conditions and calculating spindle parameters are very important tasks.
本文叙述了自动快速切削螺纹装置的工作原理,分析和计算了工作过程中主要机件的互相关系。
The article introduces the working principle of an automatic high speed thread cutting device, analyses and calculates the relation between the main parts of the device during processing.
常见的共轭曲面包括齿轮的齿面、空间凸轮的工作面和螺旋面等,其中螺旋面被广泛应用于螺纹、蜗杆、螺杆泵及金属切削刀具等领域。
The common conjugate surface includes tooth surface of gear, working surface of solid CAM, helicoidal surfaces existing in spiral burr, worm, chip flute of cutters, and so on.
介绍四齿外排屑套料装置的工作原理、结构及切削用量主要参数的确定。
This paper introduces the operation principle, structure of four-tooth outside chip discharge set of material device and main parameter determination of cutting amount.
高速切削加工作为一种新的切削理念,迄今为止,还没有系统的高速切削刀具材料的选择方案,也没有完整的加工参数可供选择。
As a new cutting idea, the HSM does not have the systemic choice plan of cutting tool material in HSM, and also does not have the integrated processing parameter to be chosen until now.
用并联机床加工汽轮机叶片时,往往受其工作空间的限制而不能在最佳的切削姿态下进行加工。
While machining turbine blade simply by Parallel machine Tool (PMT), NC program development is often limited by workspace of PMT, and it is difficult to process at the best posture.
切削用量优化是自动化工艺设计的一项重要工作。文中运用工艺优化设计的原理,借助于参数优化的方法,实现了切削用量的优化。
Optimization of cutting capacity is an important task in automatic technique design. Cutting capacity is realized to optimize with principle of technique design by means of parameters optimization.
借助于人机对话方式,可以完成确定加工顺序、工序和工步,选择机床、刀具和切削用量,计算切削参数和加工时间等工作。
By means of interactive Planning, the system may determine the operation sequence, select machine tools and cutters employed, as well as the cutting parameters and cutting time and the like.
为了估计切削过程的动态参数,文中还推出了一种线性建模方法,该方法解决了由于机床和切削过程组成闭环系统给辨识工作带来的困难。
A linear method proposed by author is used for estimating the model of the cutting process. The difficulty existing in the closed-loop machining system has been overcome by using the linear method.
它是将牙轮钻头切削齿交替工作的基本运动原理与金刚石钻头的超强耐磨切削齿技术相结合的一项技术创新。
It is a new technical innovation which the basic movement principles of the cone bit combine with the super wear-resistant diamond cutter.
如果必须将镀层上过渡段融合或切削掉来去除镀层的凸变边沿,工作人员必须严格控制,防止损伤临近的本体金属。
If the plating runouts are blended or machined to remove the abrupt plating edge, the techniques must be well controlled to avoid damaging the adjacent base metal.
夹具在机加工作业时夹持工件,但它不象钻模那样包含引导切削刀具的特殊布置。
A fixture holds the work during machining operations but does not contain special arrangements for guiding the cutting tool, as drill jigs do.
工作台直径500毫米以上,机床还具有恒速切削装置(确保工件不同直径线速趋于一致),可获得被磨表面质量一致性。
The diameter of the working table is above 500mm and the grinder is furnished with a controller of constant cutting for a consistent quality of the ground surface.
工作台直径500毫米以上,机床还具有恒速切削装置(确保工件不同直径线速趋于一致),可获得被磨表面质量一致性。
The diameter of the working table is above 500mm and the grinder is furnished with a controller of constant cutting for a consistent quality of the ground surface.
应用推荐